• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.246-250
• /
• 2022

An estimation method of glass viscosity using Lakatos model is one of the best way to calculate the viscosity of soda-lime glass. The glass viscosity is obtained by inputting a glass composition consisting of SiO₂, Al₂O₃, Na₂O, K₂O, CaO and MgO to the Lakatos model. A series of composition of glass bottles was obtained once a month for 10 months from a soda-lime glass bottle fabrication line and isokom temperatures at the viscosity of log η = 3, 6.6, 10 and 12.3 were calculated. It was found that the isokom temperature at log η = 3 and log η = 6.6 was closely related to the value of (Si+Al)/O and 1/Na, respectively.

• Journal of Practical Engineering Education
• /
• v.14 no.2
• /
• pp.377-385
• /
• 2022

As a kind of industry-university cooperation, the contract-based department for nurturing the employers that meets the needs of industrial society has started for about 20 years. In particular, interest in contract departments as part of the SMEs' human resource development support is increasing with the newly starting government, so it is expecting that the number of new contract departments will increase for the time being. The purpose of this study is to identify the characteristics of each contract department according to the learner type and contract method, and to suggest procedures and considerations for the establishment of re-education-type and third party contract-type contract departments suitable for SMEs. In particular, the authors would like to present the case of K University for how to design the curriculum to create a virtuous cycle by harmoniously reflecting the position of the operating institution as a supplier and the requirements of many companies as consumers.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.146-153
• /
• 2023

In accordance with the industrial convergence regulation sandbox decision promoted by the Ministry of Trade, Industry and Energy, the "machine tool sharing service in the factory" applied for by MyMaker Co., Ltd., an industry-academia cooperation company, was granted a demonstration exception. While implementing this, in a situation where the ordering service part had to be developed as software, the company's domain problems were identified and analyzed, procedures were established, and a system was designed that met the related requirements. As a joint research and development project to solve the difficulties of the LINC+ industry, the order-to-order system was finally developed for shared factory services. In accordance with the procedure and requirements analysis, the planning, design, prototyping, and implementation production stages were carried out. Finally, it was confirmed that the final development contents were well implemented according to the requirements, and the resolution of the difficulties was confirmed through functional verification demonstrations.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.501-511
• /
• 2023

Purpose: The purpose of this study was to investigate relationship among self-directed learning, confidence of performance, clinical learning environment and Clinical Competency of nursing students. Methods: 178 nursing students participated. Data analysis was performed using descriptive statistics, t-test, ANOVA and pearson's correlation coefficients with IBM SPSS Statistics 21.0. Results: Mean score of self-directed learning, confidence of performance, clinical learning environment and clinical competency was 3.36, 3.42, 3.20 and 3.66 points. There was significant positive correlation among self-directed learning, confidence of performance, clinical learning environment and clinical competency. Conclusion: Therefore, in order to improve the clinical competency of nursing students, it is necessary to systematize core nursing skills education and continuously improve the clinical learning environment through close industry-academia cooperation and relationship.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.277-284
• /
• 2023

It is not easy to implement an energy management system in an industrial complex where small businesses are scattered, so the method of collecting and adjusting energy-related data is mainly used. FEMS is a system that responds to the demand for a paradigm shift from a passive energy management method to an active energy management method using IoT and ICT. In this study, a factory energy management system(FEMS) is designed for small and medium-sized enterprises located in chemical industrial complexes. Efficiency was confirmed by reviewing energy saving measures and efficiencies through FEMS for the electric energy of facilities built in each company. The cost effectiveness of FEMS is created when it is utilized by responsible and empowered personnel within the business processes of the host company. Therefore, it is necessary to utilize EMS that can be applied to the planning, support, operation and evaluation, and continuous improvement of the energy management system to achieve corporate organization and energy management goals.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.397-404
• /
• 2023

This paper designs a wind turbine test site based on international regulations for the certification of wind turbine prototypes. The maximum height of the meteorological mast installed at the test site is 140m, and power facilities capable of testing up to three wind turbines of 5MW or more are installed. The weather resources measured at the mast can be recorded and analyzed using a monitoring system. Wind turbine manufacturers can use this test site during the certification period, and the installed wind turbines can be used for continuous power generation projects. Therefore, this test site can provide fundamental data for measuring the long-term performance and durability of wind turbines, which can be used to improve models or develop new wind turbines.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.387-396
• /
• 2023

The representative equipments currently used for weather observations are meteorological masters and wind lidars. According to international regulations, meteorological masters can be used for standalone measurements, but in case of wind lidars, it is mandatory to install a meteorological master that matches the height of the bottom of the wind turbine blade or a 40m meteorological masters and correct the measurement data. Turbulence flow occurs frequently at altitudes below 100m due to its nature, and wind lidars are more susceptible to the effects of turbulence than meteorological masters. However, while the turbulence intensity for meteorological masters is specified by international regulations, there is no separated specification for wind lidars. This study collected data measured under the same conditions using both meteorological masters and wind LiDARs, analyzed the uncertainties and turbulence intensity ratio. The analysis of the data showed that there were partial sections where the proportion of turbulent flow intensity exceeded 3%. Therefore, it is suggested to include a specification for the turbulence intensity error rate for wind LiDARs in the international regulations.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.507-514
• /
• 2022

This study is to compare and analyze the evaluation of cleaning cleanliness and usability according to the muscle activity and cleaning method in the wrist rotation motion when using a bottle washer for women with childbirth experience. To this end, when using an automatic bottle washer and a manual bottle washer, the muscle activity and cleaning cleanliness of the forearm muscles were quantitatively evaluated using equipment, and the effects of variables were analyzed and the following conclusions were obtained. First, it was found that the muscle activity was lower than that of the automatic baby bottle cleaner when using a manual bottle cleaner. Second, the cleanliness was judged to be the best in automatic washing (forward + reverse direction), followed by automatic washing (forward direction) and manual washing. Third, the usability evaluation of the use of the baby bottle washing machine showed higher satisfaction than that of the automatic baby bottle washing machine. Through these conclusions, this study can be used as basic data for product advancement in the future by proving the effectiveness of using an automatic bottle washer.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.235-246
• /
• 2022

SMEs are being forced to continuously innovate their technologies for survival due to changes in the external industrial environment. In order to innovate technology or discover technology cooperation partners of SMEs, it is necessary to actively introduce open innovation, centering on industry-academia-research. However, SMEs need to use open innovation brokers due to their lack of access to external resources and difficulty in independent promotion, and accordingly, the role of open innovation brokers is important. Until now, performance factors and influencing factors have been studied mainly by technology providers in the field of technology transfer, and research on mediators is very insufficient. This study analyzes the role and function of technology transfer intermediaries to explore the role of open innovation intermediaries and how they differ from existing technology transfer intermediaries. This role of open innovation intermediaries is of practical significance in that it deals with the role of intermediaries based on the results of government support projects, and it is of academic significance to serve as the basis for future research on open innovation intermediaries.