• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.161-169
• /
• 2020

In order to reduce the manufacturing cost of MCU chips used in applications such as wireless chargers and USB-C, compared to DP-EEPROM (Double Poly EEPROM), which requires 3 to 5 additional process masks, it is even more necessary MTP(Multi-Time Programmable), which is less than one additional mask and have smaller unit cell size. In addition, in order to improve endurance characteristics and data retention characteristics of the MTP memory cell due to E/P(Erase / Program) cycling, the distribution of the V_TP(Program Threshold Voltage) and the V_TE(Erase Threshold Voltage) needs to be narrow. In this paper, we proposed a current-type BL S/A(Bit-Line Sense Amplifier) circuit, WM(Write Mask) circuit, BLD(BL Driver) circuit and a algorithm, which can reduce the distribution of program and V_T and erase V_T, through compare the target current by performing the erase and program pulse of the short pulse several times, and if the current specification is satisfied, the program or erase operation is no longer performed. It was confirmed that the 256Kb MTP memory fabricated in the Magnachip semiconductor 0.13㎛ process operates well on the wafer in accordance with the operation mode.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.71-78
• /
• 2023

The possibility of improving plating thickness distribution was investigated through quantitative consideration of bipolar electrodes without external power applied. By having the cathode tilted with respect to the anode, the potential distribution in the electrolyte solution adjacent to the cathode is different due to the difference in iR drop due to the path difference to the anode in each region of the cathode. The purpose of this study is to observe the bipolar characteristics in the case of an auxiliary anode for the non-uniform potential distribution of such a Hull cell. In particular, in order to evaluate the possibility of improving the non-uniform thickness distribution of the cathode by utilizing these bipolar characteristics, it was verified through experiments and simulations, and the electric potential and current density distribution around the bipolar electrode were analyzed. The electroplating in a Hull cell was performed for 75 min at a current density of 10 mA/cm², and the average thickness is about 16 ㎛. The standard deviation of the thickness was 10 ㎛ in the normal Hull cell without using the auxiliary anode, whereas it was 3.5 ㎛ in the case of using the auxiliary cathode. Simulation calculations also showed 8.9 ㎛ and 3.3 ㎛ for each condition, and it was found that the consistency between the experimental and simulation results was relatively high, and the thickness distribution could be improved through using the auxiliary anode by the bipolar phenomenon.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.771-772
• /
• 2011

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.169-174
• /
• 2000

사용환경에서 발생하는 PC 모니터의 고장을 실험실에서 재현하기 위해 Power On/off, DPM 모드, 사용전압, Surge 유입, Torque 강도 등의 인자에 대해 여러 가지수준으로 직교배열표에 의해 실험한 결과를 토대로 시험 프로세스를 정립하여 제품설계 및 신제품 개발에 이용하였다. 실험결과와 SN 비 계산에 의하면 모니터 수평출력 TR의 고장에 대한 요인은 Mode 절환, Torque, h$_{FE}$ 산포에 유의한 영향이 있었으며, 이에 대한 IQC에서의 부품시험법, Torque 관리, TR 설계 Spec 변경을 제안하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.67
• /
• pp.11-18
• /
• 2001

The efficiency and robustness of the scale estimator based on the Gini's mean difference are well known in Nam et al.(2000). In this paper we propose use of robust control limits based on the Gini's mean difference for the control of the process deviation. To compare the performances of the proposed control chart with the existing R-chart or S-chart, some Monte Carlo simulations are performed. The simulation results show that the use of the Gini's mean difference in construction of the control limits has good performance.

• The Korean Journal of Applied Statistics
• /
• v.33 no.4
• /
• pp.451-466
• /
• 2020

CCC-r chart is effective for high-quality processes with a very low fraction nonconforming. The values of process parameters should be estimated from the Phase I sample since they are often not known. However, if the Phase I sample size is not sufficiently large, an estimation error may occur when the parameter is estimated and the practitioner may not achieve the desired in-control performance. Therefore, we adjust the control limits of CCC-r charts using the bootstrap algorithm to improve the in-control performance of charts with smaller sample sizes. The simulation results show that the adjustment with the bootstrap algorithm improves the in-control performance of CCC-r charts by controlling the probability that the in-control average number of observations to signal (ANOS) has a value greater than the desired one.

• Composites Research
• /
• v.12 no.3
• /
• pp.36-44
• /
• 1999

The fabrication process of $Al_2O_{3p}/Al$ composite by in-situ process was investigated. The effects of processing variables such as addition type and content of Mg, processing temperature and time on the infiltration behavior of molten Al, microstructure and hardness were investigated. When the pure Al was infiltrated into mixtures of Mg and $Al_2O_3l$ powder, processing temperature required to spontaneous infiltration was decreased, and the content of Mg was the most powerful variable for infiltration of molten Al. But when the Al-Mg alloy was infiltrated into $Al_2O_3l$ particles, infiltration ratio indicated nearly same value regardless of Mg content in alloy and processing temperature, and critical processing temperature required to spontaneous infiltration was $800^{\circ}C$. The $Al_2O_{3p}/Al$ composites which were fabricated by mixtures of Mg and $Al_2O_3l$ powders resulted in high hardness value, but hardness values were scattered due to non uniform dispersion of $Al_2O_3l$ particles by excessive reaction of Mg.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.129-136
• /
• 1999

The quality of image classification results is not always uniform over entire image. Thus, this study proposes the concept of ISDd (Index of Spatial Distribution by distance) and ISDs (ISD by scatteredness) for the evaluation of unevenness of result quality, and spatial distribution of satellite image classification errors. The ISDd is indexed mean distance of misclassified pixels and the ISDs is statistical indicator of scatteredness of misclassified pixels. In this study, the ISDd and the ISDs are calculated and evaluated for some satellite images, then misclassified area is extracted and the reasons of misclassification are examined. As the result of this study, using both the ISDd and the ISDs, the basis of decision on adoption/rejection of classification results is offered at sub-image level by evaluation of the local aggregation of misclassified pixels. Using Index of Spatial Distribution. as well as overall classification accuracy, users can understand the spatial distribution of misclassified pixels, and can have the additional criterion of the judgement on suitability and reliability of classification results.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.528-543
• /
• 2004

The biogeographical approach on the species composition, distributional range, and life form of native Korean conifers suggests that the Korean Peninsula harbors 4 families 10 genera 30 species. Early-evolved conifers maintain high species diversity and broad distribution. During the glacial periods, the ranges of cold-tolerant conifers expanded, on the other hand, those of warmth-tolerant ones reduced. Presence of endemic subalpine conifers might be the result of long-term isolation of conifers on high mountains. Horizontal and vertical ranges of native Korean conifers are classified into alpine, subalpine, montane, coastal, insular and disjunctive types, and then subdivided into twelve sub-types. Typical life form of native Korean conifers is evergreen tree, blooms in spring, and fruits ripe in autumn or following autumn. Oval and elliptical seeds with wing might be beneficial for their dispersal. Further works on the migration, dispersal, genetics, ecology of native Korean conifers are required for the better understanding of the biogeography of conifers.

• Geotechnical Engineering
• /
• v.3 no.2
• /
• pp.17-28
• /
• 1987

Reliability of the cone penetration test (CPT) for estimating shear strength of marine soils is investigated in this paper. For sands, the uncertainty about the angle of internal friction is analyzed. It includes the spatial variation of the soil and the model error in the equation used for interpretation. The most serious uncertainty encountered was the error in the interpretative models. Different methods of interpretation gave quite different values. Subjective opinion was introduced to combine all the interpretative models in a systematic manner. For clays, the undrained Shear Strength from the CPT results is usually =derived by empirical correlations between cone resistance and untrained shear strength from laboratory tests or field vane tests, expressed in terms of cone factor and function of overburden pressure. The uncertainty of the undrained shear strength is caused by data scatter of the cone factor in the correlation, model error of the cone factor, effect of anisotropy, and spatial variability of cone resistance. Among these uncertainties, the most serious one was the data scatter of the cone factor in the .correlation. Between the laboratory test and the field vane test used for correlation, the field vane test was more reliable.