• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.73-79
• /
• 2021

In the wave of the 4th industrial revolution, smart factory is required in many factories. However, small and mid-sized companies (SMEs) still have aging machines and are having difficulties in the data collection stage, which is the basis of smart factories. This study proposes a low cost monitoring method by using an open source based technology that extracts data from the image of the facility control panel without the need for modification of existing facilities. The proposed method was tested and evaluated for forging facilities in automobile parts manufacturing plants through prototyping. As a result of the evaluation, it was confirmed that low-cost facility monitoring is possible, and it will help SMEs build smart factories.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.1-9
• /
• 2023

Most existing industrial robots have fences installed around them to ensure safety. However, industrial sites are recently being transformed into workspaces shared by both robots and humans working cooperatively, wherein the robots are without security fencing owing to the development of sensor technology. However, in the last five years (2017-2021), 16 deaths have occurred due to robots at industrial sites, with the main cause of the accidents being workers approaching an industrial robot in operation and getting entangled with or colliding into the robot and its peripherals. To prevent such accidents, multilateral research is needed. To this end, this study analyzes the nonconforming contents of safety inspections for industrial robots and demonstrates the safety performance of the safety function control system implemented in an industrial robot cell. In addition, to ensure the fundamental safety of industrial robots, this study proposes the introduction of a safety certification system so that safety functions can be implemented in the design, manufacturing, and installation stages of the robots.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.248-251
• /
• 2021

방송장비가 네트워크 기술을 만나 진화하고 있다. 네트워크 케이블로 초고해상도 영상과 다채널 음향 데이터를 송·수신하고, 다수의 방송장비 제어를 가능케 하는 NDI(Network Device Interface)의 등장으로 방송장비와 네트워크 기술이 융합되고 있다. 최근 국내외 여러 기업이 네트워크 기반의 방송 솔루션을 출시하고 있어, 관련 산업계는 향후 방송장비 시장이 네트워크 기반으로 개편될 것으로 전망하고 있다. NDI는 뉴텍(NewTek)에서 개발한 IP 전송 프로토콜의 일종으로 무(無)손실, 압축, 제로(Zero) 딜레이, 멀티캐스트 등의 특징을 갖고 있다. 기존 비디오 전송 프로토콜이었던 SDI(Serial Device Interface)와는 다르게 네트워크에서 방송장비를 운용할 수 있도록 만들어진 프로토콜이다. 본 논문에서는 NDI를 기반으로 앞으로 다가올 포스트 코로나 시대에 대응할 효율적인 방송 환경을 제안하고자 한다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2024

In the development and mass production of polymers, there are many uncontrollable variables. Even small changes in chemical composition, structure, and processing conditions can lead to large variations in properties. Therefore, Traditional linear modeling techniques that assume a general environment often produce significant errors when applied to field data. In this study, we propose a new modeling method (GPR-SEM) that combines Structural Equation Modeling (SEM) and Gaussian Process Regression (GPR) to study the Friction-Coefficient and Flexural-Strength properties of Polyacetal resin, an engineering plastic, in order to meet the recent trend of using plastics in industrial drive components. And we also consider the possibility of using it for materials modeling with nonlinearity.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.57-63
• /
• 2016

Though a valve is a very important part in a system to control properly, it has potential failure caused by gap from valve stem to ball connection, and abrasion, crack, fixation causing operational trouble and accidents. 64% of the valve failure in the real case was the failure of airtightness and most accidents of leakage and explosion were occurred while fixing the failure. While there are no proper safety manual, maintenance procedure and regulation for industrial valves excluding safety valve, safety management for the valves is left to the discretion of the maintenance company. Strict maintenance that removes hazards and emergency response procedure are required to prevent and reduce the loss of accident. This study suggests safety enhancement measures through valve monitoring by investigating the status of use of valve and current maintenance. Enhancement of gas safety management can be acquired by a monitoring system that provides diagnosis for valve status, monitoring real-time gas leakage, management of entire cycle lifetime that can reduce maintenance cost.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.495-498
• /
• 2018

In this paper, we propose an DAP system for dose evaluation of medical and industrial X-ray generator. Based on the DAP measurement technique using the Ion-Chamber, the proposed system can clearly measure the exposure radiation dose generated by the diagnostic X-ray apparatus. The hardware part of the DAP measures the amount of charge in the air that is captured by an X-ray. The high-speed processing algorithm part for cumulative radiation dose measurement through microcurrent measures the amount of charge captured by X-ray at a low implementation cost (power) with no input loss. The wired/wireless transmission/reception protocol part synchronized with the operation of the X-ray generator improves communication speed. The PC-based control program part for interlocking and aging measures the amount of X-ray generated in real time and enables measurement graphs and numerical value monitoring through PC GUI. As a result of evaluating the performance of the proposed system in an accredited testing laboratory, the measured values using DAP increased linearly in each energy band (30, 60, 100, 150 kV). In addition, since the standard deviation of the measured value at the point of 4 division was ${\pm}1.25%$, it was confirmed that the DAP showed uniform measurements regardless of location. It was confirmed that the normal operation was not less than ${\pm}4.2%$ of the international standard.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.89-97
• /
• 2015

Plant factory was started in Europe in the 1960. Thanks to the development of seeds science, nutrient study, environment control technology and automated systems, it has developed into the form of full artificial light system. In recent years, productivity of plant factory has increased with the convergence of ICT. An interest in plant factory has increased with several outstanding achievements. However, the plant factory industry is still stuck at an introductory stage and government investment has been reduced. In order to verify the feasibility of the plant factory, we conducted a survey targeting experts in politics, R&D and business field. We analyze the feasibility of investment in plant factory and strategies to enhance the competitiveness of plant factory.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.10
• /
• pp.611-620
• /
• 2003

This paper presents improved GUI based analysis tool o( load flow of power system (or contingency. It is effective tool to facilitate the teaching and learning of load flow of power system. This software is the named of PFGUI(Power Flow GUI) that written in TooIBookII of Asymetrix. The PFGUI is friendly for study for power system operation and control because picture provide a better visualizing of relationships between input parameters and effects than a tabula type result. This PFGUI enables topology and the output data of load flow for line outages to be shown on same picture page. Users can input the system data for power flow on the the picture and can easily see the the result diagram of bus voltage, bus power, line flow. It is also observe the effects of different types of variation of tap, shunt capacitor, loads level, line outages. Proposed PFGUI has been studied on the Ward-Hale 6-Bus system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.33-40
• /
• 2017

In this Paper, Analyse the Steady State Behavior of TCP and TFRC with Packet Error when both TCP and TFRC Flows Co-exist in the Network. First, Model the Network with TCP and TFRC Connections as a Discrete Time System. Second, Calculate Average Round Trip Time of the Packet Between Source and Destination on Packet Loss Environment. Then Derive the Steady State Performance i.e. Throughput of TCP and TFRC, and Average Buffer Size of RED Router Based on the Analytic Network Model. The Throughput of TCP and TFRC Connection Decrease Rapidly with the Growth of Sending Window Size and Their Transmission Rate but Their Declines become Smoothly when the Number of Sending Window Arrives on Threshold Value. The Average Queue Length of RED Router Increases Slowly on Low Transmission Rate but Increases Rapidly on High Transmission Rate.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.4
• /
• pp.309-320
• /
• 2006

The imprecise real-time system provides flexibility in scheduling time-critical tasks. Most scheduling problems of satisfying both 0/1 constraint and timing constraints, while the total error is minimized, are NP-complete when the optional tasks have arbitrary processing times. Liu suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on uniprocessors for minimizing the total error. Song et al suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on multiprocessors for minimizing the total error. But, these algorithms are all off-line algorithms. In the online scheduling, NORA algorithm can find a schedule with the minimum total error for the imprecise online task system. In the NORA algorithm, the EDF strategy is adopted in the optional scheduling.<중략> The algorithm, proposed in this paper, can be applied to some applications efficiently such as radar tracking, image processing, missile control and so on.