• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.562-568
• /
• 2010

Until now, the implementation of servo motor control units which is being applied in various industrial ares such as industrial system, office equipment, home appliance and robotics, used the MCU and DSC(or DSP). However, MCU and DSC have limitations of not being able to maximize control efficiency of the motor and the flexibility. Thus, in this paper, we propose and implemented the designing method for development of servo motor control IP based on FPGA which have a structure to make the best motor control efficiency and flexibility of control,

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.185-188
• /
• 2009

In this paper, Position Controller for balance of Seesaw System design using PID Algorithm. Seesaw System is that it's system use widely to analyze of ship or flight dynamics, Inverted Pendulumand, Robot System, manage system for theory of modern control system and all sorts of analysis. In case of Seesaw System, it's necessity that understand and analysis of system and correct selection of parameter because the system is strong nonlinear control system. It guarantees efficiency and stability to adapt quickly for disturbance or change of controller from PID Algorithm of guarantee safe from simple and long history and PSO(Particle Swarm Optimization) that sort of metaheuristic optimization that need to accuracy and fast PID parameter tuning.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.68-74
• /
• 2022

This study analyzed the wake characteristics of the rim-driven propeller (RDP) used in an underwater robot. For underwater robots to perform specific missions, not only propulsion characteristics but also wake characteristics must be considered. In this study, a blade was designed based on NAC 0012 with a symmetrical cross-section. The RDP was hubless with three or four blades. The influence of both the free water surface and the bottom was considered, and the wake was measured using a particle image velocimetry in the advance ratio of 0.2 to 1. Model 1 showed symmetrical wakes in the entire advance ratio section. Model 2 showed asymmetric wakes due to the influence of the free water surface and the bottom at low advance ratio.

• Journal of Broadcast Engineering
• /
• v.28 no.2
• /
• pp.230-237
• /
• 2023

Self-driving is a key technology of the fourth industry and can be applied to various places such as cars, drones, cars, and robots. Among them, localiztion is one of the key technologies for implementing autonomous driving as a technology that identifies the location of objects or users using GPS, sensors, and maps. Locilization can be made using GPS or LIDAR, but it is very expensive and heavy equipment must be mounted, and precise location estimation is difficult for places with radio interference such as underground or tunnels. In this paper, to compensate for this, we proposes an image retrieval using attention module and image segmentation maps using color images acquired with low-cost vision cameras as an input.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.1-9
• /
• 2023

Most existing industrial robots have fences installed around them to ensure safety. However, industrial sites are recently being transformed into workspaces shared by both robots and humans working cooperatively, wherein the robots are without security fencing owing to the development of sensor technology. However, in the last five years (2017-2021), 16 deaths have occurred due to robots at industrial sites, with the main cause of the accidents being workers approaching an industrial robot in operation and getting entangled with or colliding into the robot and its peripherals. To prevent such accidents, multilateral research is needed. To this end, this study analyzes the nonconforming contents of safety inspections for industrial robots and demonstrates the safety performance of the safety function control system implemented in an industrial robot cell. In addition, to ensure the fundamental safety of industrial robots, this study proposes the introduction of a safety certification system so that safety functions can be implemented in the design, manufacturing, and installation stages of the robots.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.17-22
• /
• 2023

As the importance of artificial intelligence grows rapidly and emerges as a leader in technology, it is becoming an important variable in the next-generation industrial system along with the robot industry. In this study, a safety system was developed using deep learning technology to provide worker safety in a robot workplace environment. The implemented safety system has multiple cameras installed with various viewing directions to avoid blind spots caused by interference. Workers in various scenario situations were detected, and appropriate robot response scenarios were implemented according to the worker's risk level through IO communication. For human detection, the YOLO algorithm, which is widely used in object detection, was used, and a separate robot class was added and learned to compensate for the problem of misrecognizing the robot as a human. The performance of the implemented system was evaluated by operator detection performance by applying various operator scenarios, and it was confirmed that the safety system operated stably.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.42-52
• /
• 1997

Computer aided process planning and Offline programming are decisive factors in successful implementation of automated robotic production. However, conventional offline programming procedure has proven ineffective due to time-consuming teaching process for robot programming and due to inefficient system modeling. The paper presents an efficient procedure to semi-automatically generate robot job programs for ship block welding applications. In the research, the teaching positions are automatically determined by predefined rules which are functions of the type and the dimensions of the given welding section of ship block. And a sequence of robot movements and welding conditions such as welding type, welding current, welding speed, and welding torch orientation, are determined by use of Standard Program which is experimentally proved to work well for the welding wection group. Finally, a robot program for the welding section is generated automatically. Based on the algorithm, a offline automatic teaching software is developed. The paper presents also the algorithm and structure of the software.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.280-283
• /
• 2021

SME(small and medium sized enterprise) 환경의 스마트공장 환경에서는 실제 제조라인에서 동작하는 센서(Sensor) 및 액추에이터(Actuator)와 이를 관리하는 PLC(Programmable Logic Controller), 더불어 그러한 PLC를 제어 및 관리하는 HMI(Human-Machine Interface), 그리고 다시 PLC와 HMI를 관리하는 OT(Operational Technology)서버로 구성되어 있으며, 제어자동화를 담당하는 PLC 및 HMI는 공장운영을 위한 응용시스템인 OT서버 및 현장 자동화를 위한 로봇, 생산설비와의 직접적인 연결을 수행하고 있어서 스마트공장 환경에서 보안 기술의 개발이 중점적으로 필요한 영역이다. 이러한 SME 환경의 스마트공장 보안 내재화를 이루기 위해서는, 스마트공장 SW 및 HW 개발 단계에서 IEC 62443-4-1 Secure Product Development Lifecycle에 따른 프로세스 정립 및 IEC 62443-4-2 Component 보안 요구사항과 IEC 62443-3-3 System 보안 요구사항에 적합한 개발 방법론의 도입이 필요하다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.259-263
• /
• 2022

As urbanization progresses in Korea, megacities are being formed around the metropolitan area, the central area, and the southeast area. In addition, it is accelerating the development of urban air mobility (UAM) that can be operated by Mega City as a new growth engine industry in the future. At the same time, in order to become a space powerhouse, Korea plans to establish its own Korean positioning system (KPS) by 2035. Therefore, if urban air mobility and location information services provided by the Korean positioning system are used in combination, urban air mobility can be stably operated in future megacities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.203-212
• /
• 2019

Along with the recent fourth industrial revolution, the world's manufacturing powerhouses are pushing for national strategies to revive the sluggish manufacturing industry. Moon Jae-in, the government is in accordance with the trend, called 'advancement of science and technology is leading the fourth round of the Industrial Revolution' strategy. Intelligent information technology such as IoT, Cloud, Big Data, Mobile, and AI, which are key technologies that lead the fourth industrial revolution, is promoting the emergence of new industries such as robots and 3D printing and the smarting of existing major manufacturing industries. Advances in technologies such as smart factories have enabled IoT-based sensing technology to measure various data that could not be collected before, and data generated by each process has also exploded. Thus, this paper uses data generators to generate virtual data that can occur in smart factories, and uses them to analyze the cause of the defect in real time and to predict the replacement cycle of the facility.