• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.803-810
• /
• 2017

the liquid oxygen transitions to a supercritical state, causing rapid changes in properties and pseudo boiling in supercritical combustion. the combustion reaction operating in a supercritical state depends on the turbulence diffusion caused by difference of density, therefore, a study of the diffusion flow and pseudo boiling is required. Many researchers have studied these phenomena in the supercritical combustion, but A case study by various variables is inadequate. In this study, the flow field and flame structure were investigated numerically by changing the recirculation flow and liquid oxygen core length through oxygen-fuel ratio(O/F), combustor diameter and recess ratio at supercritical pressure condition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.57.2-57.2
• /
• 2009

퍼클로레이트 이온($ClO_4^-$)는 자연적으로 혹은 인공적으로 만들어지며 퍼클로릭산이나 암모늄 퍼클로레이트나, 포타슘 퍼클로레이트 혹은 소듐퍼클로레이트 염의 형태로 존재하며, 물에 아주 잘 녹고, 끓여도 제거되지 않으며, 활성 탄소와 같은 광물에도 흡착 되지 않는 성질로 인해, 기존 물리적인 정수 방법으로는 제거하기 어렵다. 또한 우리 몸에 흡수되면, 요오드가 갑상선에 흡수되는 작용을 방해하여 갑상선 기능장애를 초래한다. 이러한 퍼클로레이트 이온의 제거방법으로는 이온교환법이나 생물학적 방법 등이 개발되어져 있으나, 제거 시스템에 이동 및 안전한 농도까지 제거 등의 문제점으로 인한 퍼클로레이트 이온을 환원시키는 촉매 환원 반응에 의한 퍼클로레이트 이온 제거 기술 개발이 필요하다. 이런 촉매 환원에 필요한 수소 환원제를 발생시키기 위해서, 본 연구에서는 Carbon felt 위에 DC magnetron sputtering에 의한 thin film $TiO_2$과 regine을 이용한 powder $TiO_2$ 시편을 제작하였다. 이렇게 제작 된 $TiO_2$/Carbon felt의 미세구조 및 특성은 XRD, SEM, UV-vis-NIR 등을 통하여 분석하였다. UV 조사에 의해 $TiO_2$/Carbon felt 시편의 산소와 수소 발생과 DC bias의 걸어주었을 때 산소와 수소 발생 차이 등을 비교하였고, 이에 따른 퍼클로 레이트 이온의 분해 영향을 알아보았다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.197-204
• /
• 2012

We explore the evolution of metal plasma generated by high laser irradiances and its effect on the surrounding air by using shadowgraph images after laser pulse termination and X-ray diffraction (XRD) of aluminum plasma ablated by a high-power laser pulse (>1000 mJ/pulse) and oxygen from air. Hence, the formation of laser-supported detonation and combustion processes has been investigated. The essence of this paper is in observing the initiation of chemical reaction between the ablated aluminum plasma and oxygen from air by the high-power laser pulse (>1000 mJ/pulse) and in conducting a quantitative comparison of the chemically reactive laser-initiated waves with the classical detonation of an exploding aluminum (dust) cloud in air. The findings in this work may lead to a new method of initiating detonation from a metal sample in its bulk form without any need to mix nanoparticles with oxygen for initiation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.293-298
• /
• 2005

Lab scale experimental study was carried out for SBR process, to investigate the effects of influent ship sewage organic compound removal and Bacillus sp. state on design parameters. This process was able to remove nitrogen and phosphorus as well as organic matter efficiently. More than 95% of chemical oxygen demand(COD) were removed. In addition, about 97% of total nitrogen (T-N) was reduced. The total phosphorus(T-P) reduction averaged 93%. The performance load of SBR process was shown to be 0.095kg ${\cdot}$ TOC/$m^{3}$ ${\cdot}$ day. The pH was decreased from 8.1 to 7.0 within 30 min and increased to 7.3 at the end of anoxic stage, and these phenomena were explained. The sluge produced in the SBR process is characterized by low generation rate (about 0.36kg ${\cdot}$ MLSS/kg ${\cdot}$ TOC) and excellent settleability. The number of Bacillus sp. in the SBR was 24.2%, indicating that Bacillus sp. was a predominant species in the reactor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.164-164
• /
• 2003

UV 발광소자 재료로서 유망한 ZnO film을 ALE법으로 증착하고 photoluminescence특성을 조사하였다. Zn소스로서 DEZn(Diethylzinc)를, 산소 소스로서 DI water를 사용하였고 $N_2$ gas로서 챔버내에 주입된 소스물질을 purge하였다. ALE 공정온도 범위인 17$0^{\circ}C$와 CVD 반응온도 범위인 40$0^{\circ}C$로 ZnO 박막을 증착하고 이 시편을 산소 분위기에서 600-100$0^{\circ}C$의 온도로 1시간 동안 열처리하였다. 그리고 He-Cd laser를 사용하여 photoluminescence를 측정하였다. 17$0^{\circ}C$와 40$0^{\circ}C$ 에서 증착된 시편 모두 as-grown 상태에서는 거의 발광특성을 나타내지 못하였으나 후열처리를 거치면서 발광특성을 나타내었고 열처리 온도가 높을수록 발광강도가 증가하였다. 40$0^{\circ}C$에서의 증착된 시편의 경우는CVD반응이 발생하여 Zn-Zn결합이 많이 생성되어 열처리 온도가 증가하여도 발광강도가 약하였고 가시광 영역의 발광 또한 크게 증가하였으며 17$0^{\circ}C$에서 증착된 시편의 경우는 열처리 온도가 증가할수록 UV영역의 발광강도만이 크게 증가하였으며 가시광 영역의 발광은 거의 증가하지 않았다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.489-492
• /
• 2002

고분자/금속 복합재료는 현대 전자산업에 중요한 역할을 하고 있다. 그러나 이들간의 계면은 고분자의 수축 또는 계면 안정성의 저하로 인하여 박리가 일어나게 된다. 즉, 계면의 접합이 떨어지게 되면 전기 화학적인 반응이 계면에서 발생하여 드러난 금속부위는 산화되고 산소가 환원될 때 발생하는 OH기와 같은 라디칼들에 의해 금속과 고분자 사이의 결합이 파괴되어 금속표면으로부터의 고분자의 박리가 발생한다. (중략)

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.18-25
• /
• 2013

It may occur health hazards or death by suffocation or acute poisoning in case of oxygen deficiency in ambient or exposure to harmful gas. As a part of accident prevention, we studied the change of activity and lethal dose by changing the concentration of several hazardous gas with inhalation exposure chamber and laboratory animals. We investigated the lethality and motility change during either the 4 hrs whole body exposure to oxygen, nitrogen, toluene, $H_2S$, CO and 48 recovery. As results, it is estimated that 5% oxygen concentration as lethal concentration and 5.5% as $LC_{50}$ (rat, 4 hrs) with statistics for dose-response. The results of lethality in oxygen deficient condition (approximately 6%), the lethalities were 40%, 20% with 20 ppm $H_2S$, 600 ppm CO respectively, and was not increased the lethality with 8% CO. Thus, it was confirmed that the $H_2S$, CO had influence to lethal dose, while toluene had low fluence.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.922-929
• /
• 2007

The complete oxidation of ammonia to nitrate is a distinctive two-step process divided into the oxidation of ammonia to nitrite(nitritation) by Nitrosomonas and the oxidation of nitrite to nitrate(nitratation) by Nitrobacter. The nitrogen removal via nitrite accumulation offers several advantages such as saving costs for aeration, saving carbon source and finally reduction of sludge discharge. In this work a suspended bioreactor coupled with membrane filtration(MBR) was used to find the process conditions of nitrite build-up. The MBR enables to reach sufficient nitrifying bacteria in the bioreactor, although the autotrophic bacteria can be easily washed out due to their lower growth rate. The dissolved oxygen concentration $c'_{O2}$ and ammonia concentration $c_{NH3}$ in the reactor were varied and investigated as parameters for nitrite accumulation. As a result the higher ammonia concentration in the reactor is very effective for starting nitrite build-up and the effect was strengthened in combination with lower dissolved oxygen concentration. With lower $c'_{O2}<0.3$ $mgL^{-1}$ $O_2$ and high $c_{NH3}=6.3\sim14.9$ $mgL^{-1}$ $NH_3N$ the 74% of the nitrite accumulation was achieved. Specially, it was found that the nitrite accumulation could occur not only in biofilm reactor as many references showed but also in the membrane bioreactor carried out in this study.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.82-87
• /
• 2008

$N_2O$ decomposition characteristics of dual bed mixed metal oxide catalytic system was investigated. The partial oxidation of methane at first reactor of dual bed catalytic system was performed over Co-Rh-Al (1/0.2/1) catalyst under the optimized condition of $8,000h^{-1}$ GHSV, gas ratio ($CH_4:O_2=5:1$) at $500^{\circ}C$. In the dual bed system investigated herein, the second catalyst bed was employed for the $N_2O$ decomposition using product of partial oxidation of methane at first bed. An excellent $N_2O$ conversion activity even at lower temperature ($<250^{\circ}C$) was obtained with Co-Rh-Al (1/0.2/1) or Co-Rh-Zr-Al (1/0.2/0.3/1) catalyst by combining Co-Rh-Al (1/0.2/1) hydrotalcite catalyst for the partial oxidation of methane in a dual-bed system. The $N_2O$ conversion activity is drastically reduced in the presence of oxygen in second bed of a dual-bed system over Co-Rh-Al (1/0.2/1) catalyst at $300^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.4
• /
• pp.64-70
• /
• 2023

Global warming is getting worse since a dramatic increase in greenhouse gas emissions recently. As a result, the necessity and implementation of carbon neutrality is required more urgently. To do this, among various new and renewable energies, attention in hydrogen arises. Hydrogen as a carbon-free power source is an abundant resource on Earth and is eco-friendly. Eventually, perfectly eco-friendly hydrogen can be obtained through electrolysis of water. However, the catalyst used in the oxygen evolution reaction is rare and expensive, and has a durability issue. Consequently, the development of a non-precious metal catalyst is necessary. In this review paper, we summarize and introduce Co- and Mo- based catalysts among recently announced oxygen evolution catalysts. This will help understand the design of catalyst to increase the activity and durability of non-precious metal catalysts.