• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.309-316
• /
• 1996

The purpose of this study was to determine the effect of salivary contamination of etched enamel on shear bond strength of a bracket adhered to etched enamel. Eighty extracted human permanent premolars were used in this study. These samples were divided into two groups. Buccal surface of samples were etched in vitro with 38% phosphoric acid for 15 seconds and 60 seconds. Each group was divided into four subgroups. Etched enamel surfaces were contaminated with saliva for 0, 1, 20, 60 seconds, washed and dried. Test surfaces were examined using scanning electron microscope(SEM). The shear bond strength of each sample was determined with a universal testing instrument(Instron Co. Model 4201). Results were as follows; 1. Salivary contamination for 1, 20, 60 seconds did not affect shear bond strength when compared with the uncontaminated enamel group. 2 There was no significant difference(P>.05) in shear bond strength between 15 sec. and 60 sec. etching in uncontaminated enamel groups. 3. When samples were examined using SEM, organic materials coated enamel surface masked the etched pattern partially.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.263-268
• /
• 2006

Recently, self-etching adhesive system has been introduced to simplify the clinical bonding proce- dures. It is less acidic compared to the phosphoric acid, thus there is doubt whether this system has enough bond strength to enamel. The purpose of this study was to investigate the influence of additional etching on the adhesion of resin composite to enamel. Ninety extracted bovine permanent anterior teeth were used. The labial surfaces of the crown were ground with 600-grit abrasive paper under wet condition. The teeth were randomly divided into six groups of 15 teeth each. Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop and Tyrian $SPE^{TM}$ were used as self-etching primers. Each self-etching primers were applied in both enamel specimens with and without additional etching. For additional etching groups, enamel surface was pretreated with 32% phosphoric acid (UNI-ETCH, Bisco, Inc., Schaumburg, IL. USA). Hybrid resin composite Clearfil AP-X, (Kuraray Co., Ltd., Osaka, Japan) was packed into the mold and light-cured for 40 seconds. Twenty-four hours after storage, the specimens were tested in shear bond strength. The data for each group were subjected to independent t - test at p < 0.01 to make comparisons among the groups. In Clearfil SE $Bond^{\circledR}$, shear bond strength of additional etching group was higher than no additional etching group (p < 0.01). In $Adper^{TM}$ Prompt L-Pop and Tyrian SPE, there were no significant difference between additional etching and non-etching groups (p > 0.01). In conclusion, self-etching adhesive system with weak acid seems to have higher bond strength to enamel with additional etching, while self-etching adhesive system with strong acid seems not.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.43-50
• /
• 2005

The purpose of this study was to evaluate the effects of a sealant resin on enamel demineralization In orthodontic bracket bonding. The forty eight extracted sound bovine teeth were subdivided into four groups and treated with Phase II (Reliance, itasca. III) on the surface Group 1 was not treated. Group 2 was acid etched with 37% phosphoric acid for 30 seconds. Group 3 was applied with sealant after acid etching. Group 4 was applied with resin paste after acid etching and sealant application. Each group was demineralized in artificial caries solution. Demineralized enamel depth was measured by confocal laser scanning microscopy. The results were as follows: the mean demineralized enamel depth was $47.4{\mu}m$. (Group 1), $61.8{\mu}m$ (Group 2), $13.9{\mu}m$ (Group 3). $8.2{\mu}m$ (Group 4) the demineralized enamel depth was increased in Group 2 than in Group 1 (p<0.05); the demineralized enamel depth was reduced in Group 3 than in Group 1 and Group 2 with statistically significant differences (p<0.05): and demineralization in Group 4 was very little. The results of the present study indicate that sealant application is useful for reducing enamel demineralization in orthodontic bracket bonding.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.445-452
• /
• 2010

Recently the effect of CPP-ACP on early caries remineralization and prevention has hashbeen extensively researched. However, there has been a lack of research on micro-shear bond strength of a sealant applied on a CPP-ACP treated surface. Therefore, the purpose of this study was to evaluate the effect of CPP-ACP on the micro-shear bond strength of a sealant bonded with 3 different bonding systems. From the sound human 3rd molars, the 150 specimens were prepared and randomly assigned to six groups. Group I: Immersion in artificial saliva for 2 weeks + 35% phosphoric acid Group II: Immersion in artificial saliva for 2 weeks + 35% phosphoric acid + dentin bonding agent Group III: Immersion in artificial saliva for 2 weeks + self-etching adhesive Group IV: CPP-ACP application for 2 weeks + 35% phosphoric acid Group V: CPP-ACP application for 2 weeks + 35% phosphoric acid + dentin bonding agent Group VI: CPP-ACP application for 2 weeks + self-etching adhesive Sealant was applied and the micro-shear bond strength was measured. From the result of this study, it can be assumed that the CPP-ACP pretreatment can weaken the bond strength of a sealant if the enamel surface is conditioned with self-etch adhesive.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.597-605
• /
• 2006

It is introduced that pit and fissure sealant is the most universal and effective to prevent occlusal dental caries. In processing of being applied the pit and fissure sealant, the various kinds of methods are developed to remove organic matters, plaque, microflora and debris in the pit and fissure for increasing the rates of maintain the sealant. Recently, the Er:YAG laser has been used as a new enamel surface treatment method. The purpose of this thesis is compared whether that enamel surface treatment method is superior to other methods or not. 1. 100mJ 5Hz Er:YAG lased enamel surface was similar to acid-etched enamel in SEM evaluation. 2, Mechanical preparation showed decreased microleakage when compared with acid-etching only, but no significant differences in both method. 3. After laser and acid-etching method showed decreased microleakage when compared with acid-etching only.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.106-121
• /
• 2007

The purpose of this study was to examine the effects of suggested etching method on the performance of pits and fissures sealant. In the first part, seventy extracted sound human permanent third molars and premolars were used. The teeth were randomly divided and performed in three different groups as follows : conventional etching, enameloplasty, and testing group. Non-pumicing, dye-guidance vigorous brushing-start etching technique was applied on the occlusal of testing group. Then the pit and fissure sealant was applied on all of the specimens. After the thermocycling and immersing in 1% methylene blue, the resin embedded sections were made. The microleakage data on the section were then recorded under the stereoscope and statistic analysis was done. Additional experiments were also performed : direct fissure surface etched pattern experiment, replica study, and micro-shear bond strength testing observation. The second part included two groups. A paired study was designed to evaluate the influence the environment has on the performance of the sealant. After etching, half of each occlusal surface received one of the two following treatments in succession: sealing in laboratory and intraoral condition (group 1), sealing in intraoral condition with and without a single-bonding agent (group 2). The results of present study can be summarized as follows: - The microleakage of testing group was significant different with conventional method (P<.05) and was not different with the enameloplasty group (P>.05). - The quality and quantity of etched enamel were improved. - Microshear bond strength of testing group was higher than control group (p<.05). - The environmental condition was influenced on the performance of the sealant. The testing etching method modified the capacity of the etching agent to penetrate into the pits and fissures, and simultaneous enhance their efficiency in vitro condition.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.4
• /
• pp.339-357
• /
• 2003

The general morphological characters and chromosome numbers about 7 taxa of Korean Allium sect. Sacculiferum were reviewed. From the results, authors elucidated the key character as well as the range of variations in each taxon, and considered the relationships among taxa in this section. Clear taxonomic treatments also carried out based on the type specimens and the original descriptions. Shape and growing pattern of leaves, size of inflorescences, shape of perianths and tepals, as well as chromosome numbers were key characters in identifying the taxa and in estimating their relationships. On the basis of these characters, A. thunbergii var. thunbergii, A. sacculiferum and A. deltoide-fistulosum were recognised as a distinct species respectively. Hal-la-bu-chu which had been misidentified as A. cyaneum (sect. Reticulato-bulbosa) in Korea was proved to be A. taquetii and belonged to the sect. Sacculi/erum. In addition, A. cyaneum var. deltoides, had been described as a variety of A. cyaneum, was recombined as a variety of A. thunbergii [A. thunbergii var. deltoides (S. Yu, W. Lee et S. Lee) H. J. Choi et B. U. Oh] with the new Korean name of 'Se-mo-san-bu-chu'. In conclusion, Korean sect. Sacculiferum was composed of five species and two varieties. A key to identify the taxa in this section was provided.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.3
• /
• pp.170-180
• /
• 2009

Somatic chromosome counts and karyotype analyses were carried out for eight taxa of Korean Allium sect. Sacculiferum. The basic chromosome number of sect. Sacculiferum was x = 8, and they could be cytologically divided into two groups, that is, a diploid group (2n = 2x = 16) containing A. thunbergii var. thunbergii, A. thunbergii var. deltoides, A. thunbergii var. teretifistulosum, A. deltoidefistulosum, A. longistylum, A. linearifolium and A. taqueti, and a tetraploid group (2n = 4x = 32) with only A. sacculiferum. All observed chromosomes were classified into metacentric, submetacentric and subtelocentric. The metacentric ones appeared in all treated taxa. One or two pairs of submetacentric chromosomes were observed in most taxa except A. sacculiferum, the unique taxon with subtelocentric chromosomes. All taxa had a pair of homologous chromosomes with satellites, and the B-chromosomes found in A. thunbergii var. thunbergii, A. deltoidefistulosum, A. sacculiferum and A. longistylum, were metacentric or telocentric. The karyotypes of A. longistylum and A. linearifolium were firstly investigated in this study. In conclusion, the somatic chromosome numbers and karyotypes for members of the sect. Sacculiferum were valuable characters in identifying taxa, investigating interspecific relationships and delimiting taxa. In addition, A. thunbergii var. teretifolium, an invalid name (homonym), was renamed as A. thunbergii var. teretifistulosum H. J. Choi & B. U. Oh.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7838-7843
• /
• 2015

In this study, metformin hydrochloride for first choice of type 2 diabetes patient is administered relatively high dose, 1000 to 2000 mg orally once a day, and had very high water solubility, so it make difficult to swallow tablet to requires high amount of sustained release agent. To overcome these challenges, we used novel metformin salts had relatively low water solubility to minimize sustaining excipient for small size of dosage form. six novel metformin salts were synthesized by making metformin free form under reaction with NaOH and adding acid salts. we confirmed metformin stearate had the lowest water solubility and showed half drug release in dissolution study at 12hour. In conclusion, novel metformin salts had low water solubility can be used to reduce the size of sustained metformin tablet for improving patient compliance.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.3
• /
• pp.220-228
• /
• 2009

C-banded karyotypes of eight taxa of Korean Allium sect. Sacculiferum were examined by means of Giemsa techniques. Each of the taxa had their own characteristic bands. Most of the bands on the somatic metaphase chromosomes were mainly located on the short arm, intercalary region and medium sized chromosomes. In addition, the heterochromatic bands were usually facultative, recognized as two spots, and all investigated taxa had a pair of satellites of heterochromatin. The similarities of total length and number of bands revealed that three varieties of A. thunbergii G. Don have a closer cytological relationship than the others. The C-banding patterns of A. longistylum and A. linearifolium were examined for the first time in this study, and the former was clearly distinguished from the others by the distribution and number of its bands. The proportion of heterochromatic bands suggested that A. thunbergii var. thunbergii is the most primitive, and A. sacculiferum the most advonced, within the section.