• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.328-336
• /
• 2020

This paper presents an asymptotic analysis method using the PO(physical optics) approximation technique to analyze the scattering contribution of an electrically large object partially coated with a radar absorbing material(RAM). By using the feature of the PO technique that can calculate the equivalent current value for each mesh independently, instead of analyzing the entire structure, scattering analysis was performed only by calculating the current on the area where the RAM coating is applied. By the numerical examples, the accuracy and the computation time of the proposed method were verified, and the computational efficiency of inverse synthetic aperture radar(ISAR) of the electrically large objects that require enormous resources is improved.

• Journal of radiological science and technology
• /
• v.4 no.1
• /
• pp.63-71
• /
• 1981

The metal-plates(Aluminium. Copper, Lead) of change the variation thickness have been penetrated by the collimated beam($450mm{\times}4mm{\phi}$) of Gamma-ray from $^{192}Ir$. Then, the scattered $\gamma$-ray dose in variable angle and the directly transmitted $\gamma$-ray dose were measured using the electrometer of ionization chamber. The results were summarized as follows: 1. Obtained the mass attenuation coefficients of $Al;0.0937cm^2g^{-1},\;Cu;0.0937cm^2g^{-1},\;pb;0.244cm^2g^{-1}$. 2. Total intensity of front scattered $\gamma$-ray follow the order of Al>Cu>pb. 3. The scattered $\gamma$-ray intensity with the lager angle of scattering was saturated after increase rapidly, and the scattering angle of the more larger was decreased. 4. The scattered $\gamma$-ray intensity through plates of aluminium or copper was saturated after increase with thicker scatterer, and the intensity was decreased at the more thicker. But the variation of scattered $\gamma$-ray dose in the lead plate made the fewest than Al and Cu. 5. The ratio of the scattered $\gamma$-ray dose and the directly transmitted $\gamma$-ray dose was saturated after increase with the thicker scatterer, and the scatterer of the more thicker was decreased. Degree of total intensity in these ratios was followed the order of Cu>Al>Pb.

• Journal of Korean Society of Forest Science
• /
• v.12 no.1
• /
• pp.59-63
• /
• 1971

In the light of the fact that Cryptorrhynchus lapathy Linne (Coleoptera: Cur-culionidae) is an important past of poplar in korea the Bionomics of the insect were studied to get some basic informations for controlling the insect. The results obtaind are as follows; 1. The poplar and willow borer has one generation in a year overwintering with egg. 2. The pupation stage was from the middle Julne to the middle July. 3. The adult appears from the early July to the middle August. 4. The average length of body of adult was about 8.5cm with female, 7.9cm with male and the length of pupa was about 11.3cm. 5. The average longevities of adults were about 30 days with mate and 40 days with female. 6. The length of damage hole were about 10.3cm. 7. The egg-laying period was from July to August.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.586-593
• /
• 1985

The rose bitterling, Rhodeus ocellatus (KNER) is commonly distributed in the fresh waters of Korea and Japan. On January 15, February 15, and March 18 in 1984, mature adults of rose bitterling were caught in the watercourse of Maeri, Kimhae, South Korea. The authors fertilized the eggs employing dry method in the laboratory on May 7, 16 and 25 in 1984. Hatched larvae were reared in small aquariums at $17{\sim}25.5^{\circ}C$ (average around $21.2^{\circ}C$). Mollusks, Anodonta woodiana in the gill chamber of which, rose bitterling lay eggs were caught in order to study natural spawning of the rose bitterling in the same watercourse. The eggs of this species are not adhesive and demersal. The size of the eggs varies from 2.54 to 2.75mm in long diameter and 1.45 to 1.65mm in short diameter. The eggs are cylindrical in form when they are extruded from ovipositor, immediately after entering water, but they acquire their distinctive form of a greatly elongated pear. Hatching took place in ca. 39 hours after fertilization. The newly hatched larvae were $2.65{\sim}2.70mm$ in total length possessing yolk sac and 13-14 myotomes. Thirteen days after hatching, the prelarvae attained 6.5 mm in total length, and the first melanophores appeared on the head, and the anterior part and sides of the yolk sac. One month after hatching, the postlarvae attained 8.5mm. in total length and emerged from the gills of the mollusks. Then the yolk sac was completely resorbed. Two months after hatching, the rose bitterling attained 14.4mm in total length, and entered the fingerling period of life. All the rays already present were the D. III, 11-12, A. III, 11-12, P. 10, V. 7. and a distinguishing, feature is the presence of a black pigment spot in the lobe of the dorsal fin.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.04a
• /
• pp.87-112
• /
• 2005

분무를 정량적으로 측정하는 것은 노즐의 설계와 개발을 위해서 뿐만 아니라 연소 시스템 전반의 효율 및 불안정성의 제거, 공해 저감 등의 요구 조건을 만족하기 위해서 중요하다. 이를 위해 이전에는 분무장 내에 수집관을 삽입하는 기계적 패터네이터(Mechanical Patternator)와 같은 삽입식 측정 방식을 이용하여 왔으나, 최근에는 고속카메라, Malvern particle analyzer, PDPA, 광학 패터네이터(Optical Patternator)와 같은 분무장을 교란시키지 않으면서도 빠른 측정이 가능한 가시화 기술들이 적용되고 있다. 특히 광학 패터네이터는 레이저 평면광을 이용하여 분무를 측정하는 비삽입식 기술로 단시간 내에 분무장 내 액체 연료의 질량 및 액적 크기의 단면 분포를 동시에 얻어낼 수 있는 장점을 갖고 있다. 그러나 분무 액적들의 수밀도가 증가하는 경우에는 이들 액적에 의한 입사광 및 신호 감쇠, 다중산란 등에 의한 오차가 심하게 발생하여, 기존의 PDPA, PLIF 등의 광학 기법으로는 충분히 신뢰할 만한 결과를 얻기가 어렵게 된다. 이러한 분무를 정량적으로 측정하기 위해서는 입사광의 감쇠뿐만 아니라 분무장 내 액적들에 의한 신호의 감쇠 과정에 대한 고려가 필요하다. 주면 액적들의 영향을 최소한으로 줄이기 위해서는 레이저 평면광을 사용하는 광학 패터네이터와 달리 레이저 광선을 분무장에 조사하여 고압에서 나타날 수 있는 다중 산란에 의한 오차를 최소화할 수 있다. 이러한 이미지 처리 기법을 이용하는 광학 선형 패터네이터(Optical Line Patternator)를 이용하여 기존 레이저 계측기법으로 측정이 곤란하였던 고압 환경 하에서의 스월 동축형 인젝터의 분무 특성을 해석할 수가 있다. 2015(년도) 6,388, 2025(년도) 13,367, 2035(년도) 18,756, 2045(년도) 22,595, 시장점유율 증가로 인한 수출액 증가분 누적(억원) : 2015(년도) 3,411, 2025(년도) 8,847, 2035(년도) 14,433, 2045(년도) 18,005 또한 시나리오 비교평가를 실시하여 본 결과, 본 연구에서 정의한 순편익 누적(Cumulative Net Profit) 변수를 적용하면 현재 연구비 추세 대비 $30\%$ 까지 연구비를 증가 시키는 것이 효율적임을 알 수 있었다.성, 생산 용이성, 제품 디자인의 우수한 정도가 a=0.01 수준 하에서 유의적으로 추정되었다. 이들 변수들 중에서 품질경쟁력에 가장 큰 영향을 미치는 측정변수는 제품의 기본 성능, 수명(내구성), 신뢰성, 제품 디자인의 순서로 추정되었다. 이것은 한국 제조업이 아직 산업 디자인이 품질경쟁력에 크게 영향을 미치는 성숙단계에 이르지 못하였음을 의미한다. (2) 제품 디자인에게 영향을 끼치는 유의적인 변수는 연구개발력, 연구개발투자 수준, 혁신활동 수준(5S, TPM, 6Sigma 운동, QC 등)이며, 제품 디자인은 우선 품질경쟁력을 높여 간접적으로 고객만족과 고객 충성을 유발하는 것으로 추정되었다. 상기의 분석결과로부터, 본 연구는 다음과 같은 정책적 함의를 도출하였다. 첫째, 신상품 개발과 혁신을 위한 포괄적인 연구개발 프로젝트를 품질 경쟁력의 주요 결정요인(제품의 기본성능, 신뢰성, 수명(내구성) 및 제품 디자인)과 연계하여 추진해야 할 것이다. 둘째, 기업은 디자인 경영 마인드 제고와 디자인 전문인력 양성을, 대학은 디자인 현장 업무를 통하여 창의력 증진과 기획 및 마케팅 능력 교육을, 정부는 디자

• Korean journal of applied entomology
• /
• v.48 no.4
• /
• pp.423-429
• /
• 2009

Characteristics of habitat alteration and post-embryonic development of Paratlanticus ussuriensis were investigated in the mountain region of Bitanri, Yeongdong county, Chungcheongbuk-do from 2007 to 2009. Overwintered eggs under the ground in the hillside were hatched from late March to early April. The soil temperature during this season was $7{\sim}14^{\circ}C$. Young nymphs lived mainly at the hillside by eating oak tree leaves but the 3rd or 4th instars switched their habitat to orchards near the hillside in early May, which is the time for sprouting of peach leaves. Old nymphs developed into the adult stage at the orchards in late May and moved back to the hillside in late June. Duration of post-embryonic development from the first instar nymph to adult was 49.2 days after 7 moltings at $25^{\circ}C$. Female adults collected from the field had long ovipositor (26.2 mm) and were slightly longer in the body length, hind femur, tegmen and pronotum than those of males.

• Korean Journal of Ichthyology
• /
• v.30 no.2
• /
• pp.75-83
• /
• 2018

This study is to observe species identification and early life history of Korean endemic species of Tanakia latimarginata and to use it as a basis for taxonomic studies. As a result of morphological identification, a dark band appeared at the margin of the anal fin, and the ovipositor color of the female was light orange. The shape of the egg was fusiform and sticky. The egg size (long${\times}$short diameter) averaged $4.41{\times}1.44mm$. The incubation time was 126 hours after the fertilization at an average water temperature of $21.0^{\circ}C$. Immediately after hatching, the larvae had egg yolk at an average total length of $5.91{\pm}0.18mm$ (n=5). At 18 days after hatching, the trunk fur was developed in the caudal fin with an average total length of $8.02{\pm}0.08mm$ (n=5). At 41 days after hatching, the larvae absorbed egg yolk at an average total length of $8.70{\pm}0.23mm$ (n=5). At 80 days after hatching, the average length of the fins was $12.6{\pm}0.28mm$ (n=5). The number of fin of the dorsal fin was iii.8, the anal fin iii.9~10, the caudal fin 19, lateral line scales 32~35 were similar to their brood stork.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.16-20
• /
• 1976

Employing 7-15 resistant and 8-15 susceptible Japanese black pine (Pinus thunbergii Parl.) trees to pine gall midge (Thecodiplosis japonensis Uchida et Inouye) as samples, needle monoterpenes were analysed by GLC in January and June, and observation was made on the oviposition preference. Following results were obtained. 1. In January, the resistant trees showed higher contents of myrcene, limonene, ${\beta}$-phellandrene and terpinolene but lower contents of ${\alpha}$-and ${\beta}$-pinene and camphene compared to the susceptible trees. But in June, ${\alpha}$-pinene, camphene, limonene, ${\beta}$-phellandrene and terpinolene were higher and the content of ${\beta}$-pinene and myrcene were lower in the resistant trees than the susceptible trees. 2. The content of limonene was higher by the 6.8 percent and the content of ${\beta}$-pinene was lower by the 9.2 percent in the resistant trees than in the susceptible trees in June. 3. No preference for oviposition was found between resistant and susceptible trees. But in the resistant trees gall formation rate was quite lower than the susceptible trees. It was considered, therefore, that limonene and ${\beta}$-pinene content in the needle might be used as an indicator of the resistant Japanese black pine to the pine gall midge regardless of season.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.89-93
• /
• 1969

The strains selected in the previous paper were identified according to the manual of Aspergilli by Thom and Raper, and the preparation of the crude enzymes with the strains were investigated. The fermented fodders were made with wheat bran and chaffs containing 20% wheat bran by the strains, and the feeding experiments concerned was conducted. The results obtained are as follows: 1. The selected strains were identified as below; MC-9 was a similar strain of Aspergillus niger van Tieghem, MC-10 was a similar strain of Aspergillus flavus Link, MC-53 was a similar strain of Aspergillus penicilloides Spegazzini and MC-61 was a similar strain of Aspergillus niger mut Schiemanni n. comb. 2. Percentages of crude enzymes obtained from the dried matters of the wheat bran cultures were MC-9: 2.9%, MC-10: 3.9%, MC-53: 6.4% and MC-61:2.6%. And the cellulase activity of MC-9 was the most active among the crude enzymes as the same as the filtrates of wheat bran cultures. 3. As the results of the feeding experiments, changes of body weights showed no trends to be significant as compared with the control group, and the groups of MC-9 and MC-61 showed the increasing significance with P<0.05 in egg-laying rate.