Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.371-371
/
2013
사파이어 단결정 웨이퍼는 제조과정에서 결정 성장 조건 및 기계적 연마에 의하여 내부적인 결함이 발생할 수 있다. 사파이어 단결정은 일반적으로 LED용 기판 재료로 사용되며, 내부결함이 발생 시 기판 위의 GaN 등 layer의 결함도 함께 증가하므로 기판의 결함을 줄이는 과정이 중요한 이슈이다. 이 과정에 X-선 토포그래피는 단결정의 내부 결함을 모니터링 하는데 있어서 매우 유용한 방법이다. 이에 본 연구에서는 사파이어 단결정 웨이퍼에 내재하는 결함 형태를 X-선 Lang 토포그래피 방법(X-ray Lang Topography)으로 이미징하여 관찰, 분석하였다. Lang 토포그래피 방법은 X-선 투과법으로 넓은 부분을 우수한 강도와 분해능으로 내부 결함을 관찰할 수 있는 장점을 지니고 있다. X-선 source는 Mo $k{\alpha}$ 1을 사용하였으며, 시료는 c-plane 사파이어 웨이퍼를 사용하였다. 사파이어 웨이퍼의 (110), (102) 회절면의 X-선 토포그래피 이미지를 통해 전위 결함의 유형에 따른 이미지 패턴의 형성 메커니즘에 대해 연구하였고, 측정 회절면과 두께, 표면 데미지에 따른 전위 결함 이미지의 변화를 확인하였다. X-선 토포그래피 이미지를 통해 단결정 c-plane 사파이어 웨이퍼의 전위 결함의 형성 메카니즘 연구와 유형별 이미지와 회절면, 두께, 표면 데미지에 따른 이미지 변화 등을 확인하였다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.306-306
/
2012
사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소재 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위하여 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서($00{\cdot}1$), ($11{\cdot}0$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 컨트롤해야한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이 결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 본 연구에서는 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 그리고 이러한 측정방법의 장점을 이용하여 ASTM의 측정법과 면방위 측정 결과를 비교 분석 하였다. 150 mm 사파이어 웨이퍼를 ASTM의 방법으로 면방위를 측정하였을 때 고분해능 장비에서 회전축 ${\Phi}$의 기준을 다르게 설정함에 따라서 수직/수평 면방위 측정결과가 많은 차이를 보였다. 그러나 본 연구에서 사용한 측정법에서는 이러한 수직/수평 면방위의 값들이 거의 변화하지 않고 일정하게 나타나는 것을 확인 하였으며, 측정한150 mm 사파이어 웨이퍼의 표면방위각은 $0.21^{\circ}$이고 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $1.2^{\circ}$벗어나 있는 방향이었다.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.361-361
/
2012
사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소자 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위한 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서 ($00{\cdot}1$), ($10{\cdot}2$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 콘트롤해야 한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어 ($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 본 연구에서 사용한 6인치 사파이어 웨이퍼에 대하여 표면방위각은 $0.21^{\circ}$이었으며 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $-1.2^{\circ}$ 벗어나 있는 방향이었다.
Seo, Yong-Gon;Sin, Seon-Hye;Kim, Du-Su;Yun, Hyeong-Do;Hwang, Seong-Min
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.222-222
/
2013
GaN 기반 반도체는 넓은 bandgap을 가지고 있어 가시광부터 자외선까지 다양한 광전소자에 유용하게 사용된다. 광전소자중 발광다이오드의 경우 대부분 사파이어 기판위에 성장된다. 하지만 사파이어와 GaN의 격자 불일치 및 열팽창 계수의 차이로 인해 고품질의 GaN를 성장하기가 어렵다. 특히 열팽창 계수의 차이는 GaN 성장 공정이 고온에서 이루어지기 때문에 성장후 상온으로 온도가 떨어질 때 웨이퍼의 bowing을 발생시키고 동시에 dislocation이나 crack과 같은 결함이 생성되 GaN 성장막의 품질을 떨어트린다. 웨이퍼의 크기가 커지면 커질수록 웨이퍼 bowing은 커져 이에 대한 연구는 중요하다. 본 논문에서 2인치 사파이어 기판위에 성장된 GaN의 bow특성을 알아보기 위해 먼저 simulation을 하였고 실제로 성장된 GaN 웨이퍼와 비교를 하였다. c-plane 사파이어 기판위에 성장된 c-plane GaN의 bow특성을 알아보기 위해 성장 온도 $1,100^{\circ}C$에서 GaN두께를 1 ${\mu}m$에서 10 ${\mu}m$까지 1 ${\mu}m$씩 변화시켜 가며 simulation을 하였다. GaN두께가 1 ${\mu}m$일때는 bow가 11 ${\mu}m$, 6 ${\mu}m$ 일때는 54.7 ${\mu}m$, 10 ${\mu}m$ 일때는 108 ${\mu}m$를 얻어 GaN두께가 1 ${\mu}m$씩 증가할 때 마다 bow가 약 10 ${\mu}m$씩 증가하였다. 성장온도에 대한 영향을 알아보기 위해 $700^{\circ}C$에서 $1,200^{\circ}C$까지 $100^{\circ}C$씩 증가시켜며 bow특성 simulation을 하였다. 6 ${\mu}m$성장된 GaN의 경우 성장온도가 $100^{\circ}C$ 씩 증가할 때 bow는 약 6 ${\mu}m$ 증가하였다. 실제 성장된 c-plane GaN웨이퍼와 비교하기 위해 GaN을 각각 3 ${\mu}m$와 6 ${\mu}m$를 성장시켰고 high resolution x-ray diffraction장비를 사용하여 bow를 측정한 결과 각각 28 ${\mu}m$와 61 ${\mu}m$ 였고 simulation결과는 각각 33 ${\mu}m$와 65.5 ${\mu}m$를 얻어 비슷한 결과를 보였다. c-plane 사파이어 기판위에 성장된 c-plane GaN는 방향에 무관하게 동일한 bow 특성을 가지는 반해 r-plane 사파이어 기판위에 성장된 a-plane GaN는 방향에 따라 다른 bow특성을 보인다. a-plane GaN 이방향성적인 bow 특성을 알아보기 위해 simulation을 하였다. $1,100^{\circ}C$에서 a-plane GaN을 성장할 때 두께가 1 ${\mu}m$ 증가할 때마다 bow가 c축 방향으로는 21.7 ${\mu}m$씩 증가하였고 m축 방향으로는 11.8 ${\mu}m$ 씩 증가하여 매우 큰 이방향성적인 bow 특성을 보였다. 실제 r-plane 사파이어 기판위에 성장된 a-plane GaN의 bow를 측정하였고 simulation 결과와 비교해 보았다.
Park, Hyeong-Won;Byeon, Gyeong-Jae;Hong, Eun-Ju;Lee, Heon
Proceedings of the Materials Research Society of Korea Conference
/
2009.05a
/
pp.50.2-50.2
/
2009
사파이어는 질화물계 광전자소자 제작 시 박막 성장 기판으로 주로 사용되어 최근 그 중요성이 부각되고 있다. 특히 미세 패턴이 형성된 사파이어 기판을 이용하여 질화물계 발광다이오드 소자를 제작하면 빛의 난반사가 증가하여 광추출효율에 큰 개선이 나타난다. 또한 사파이어는 화학적 안정성이 뛰어나고, 높은 강도를 지녀 나노임프린트 등 여러 가지 패터닝 공정에서 패턴 형성 몰드로도 응용될 수 있다. 그러나 이와 같은 사파이어의 화학적 안정성으로 인하여 sub-micron 크기의 미세 패턴을 형성하기 힘들며, 현재 사파이어의 패턴은 micron 크기로 제한되어 사용되고 있다. 본 연구에서는 나노임프린트 리소그라피(NIL)를 사용하여 사파이어 웨이퍼의 c-plane위에 sub-micron 크기의 hole 패턴 및 pillar 패턴을 형성하였다. 우선 Hole 패턴을 형성하기 위해 사파이어 기판 위에 금속 hard mask 패턴을 UV 임프린트 공정과 etch 공정을 통해 형성하였다. 그리고 이 금속 패턴을 mask로 사파이어를 ICP 식각을 하여 hole 패턴을 형성하였다. 또한 Pillar 패턴을 형성하기 위해 lift-off 공정을 이용하여 금속 마스크 패턴을 형성하였고 이를 ICP 식각을 통해 사파이어 기판 위에 pillar 패턴을 형성하였다.
Journal of the Korean Society for Precision Engineering
/
v.22
no.2
/
pp.46-52
/
2005
The sapphire wafer was polished by the implementation of the surface machining technology based on nano-tribology, The removal process has been performed by grinding, lapping and chemical-mechanical polishing. For the chemical mechanical polishing process, the chemical reaction between the slurry and sapphire wafer was investigated in terms of the change of Zeta-potential between two materials. The Zeta-potential was -4.98 mV without the slurry in deionized water and was -37.05 mV for the slurry solution. By including the slurry into the deionized water the Zeta-potential -29.73 mV, indicating that the surface atoms of sapphire become more repulsive to be easy to separate. The average roughness of the polished surface of sapphire wafer was ranged to 1∼4$\AA$.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.10
no.5
/
pp.350-355
/
2000
The fabrication of sapphire wafer in C plane has been developed by horizontal Bridgeman method and GaN based semiconductor epitaxial growth has been carried out in metal organic chemical vapour deposition. The single crystalline ingot of sapphire has been utilized for 2 inch sapphire wafers and wafer slicing and lapping machines were designed. These several steps of lapping processes provided the mirror-like surface of sapphire wafer. The measurements of the surface flatness and the roughness were carried out by the atomic force microscope. The GaN thin film growth on the developed wafer was confirmed the wafer quality and applicability to blue light emitting devices.
Journal of the Korea Academia-Industrial cooperation Society
/
v.16
no.9
/
pp.5748-5755
/
2015
Scribing is cutting process to determine production amount and characteristic of LED chip. So it is an important process for fabrication of LED chip. Mechanical process and conventional scribing process with laser source has several problems such as thermal deformation, decreasing of material strength and limitation of cutting region. To solve these problems, internal laser scribing process that generates void in wafer and derives self-crack has been researched. However, studies of sapphire wafer cutting by internal laser scribing process for fabrication of LED chip are still insufficient. In this paper, cutting parameters were determined to apply internal laser scribing process for sapphire wafer for fabrication of LED chip. Then, foundation of cutting condition was established to set up internal laser scribing system through investigation of cutting characteristics by several experiments.
Journal of the Korean Society for Precision Engineering
/
v.21
no.2
/
pp.218-223
/
2004
The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by Micro-lapping process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of crystalline sapphire wafer at surface has a full width at half maximum of 250 arcsec. This value at the surface sapphire wafer surfaces indicated 0.12${mu}m$ sizes. Surfaces of sapphire wafers were mechanically affected by residual stress and surface default. As a result, the value of surface roughness of sapphire wafers measured by AFM(Atom Force Microscope) was 2.1nm.
Transactions of the Korean Society of Mechanical Engineers A
/
v.29
no.4
s.235
/
pp.632-638
/
2005
The surface lapping process on sapphire wafer was carried out for the epitaxial process of thin film growth of GaN semiconducting material. The planarization of the wafers was investigated by the introduction of the dummy wafers. The diamond lapping process causes the surface deformation of dislocation and micro-cracks. The material deformation due to the mechanical stress was analyzed by the X-ray diffraction and the Vickers indentation. The fracture toughness was increased with the increased annealing temperature indicating the recrystallization at the surface of the sapphire wafer The sudden increase at the temperature of $1200^{\circ}C$ was correlated with the surface phase transition of sapphire from a $-A1_{2}O_{3}\;to\;{\beta}-A1_{2}O_{3}$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.