Journal of Korean Society of Environmental Engineers
/
v.31
no.3
/
pp.179-185
/
2009
In this research, the removal capacity of Cr(VI) by the reused powdered wastes (RPW) containing aluminium oxides was studied. As a pre-treatment process for the preparation of calcined wastes, calcination was conducted at $550^{\circ}C$ to remove organic fraction in the raw wastes. In order to study the adsorption trend of Cr(VI) ions from aqueous solutions, the pH-edge adsorption, adsorption kinetic and adsorption isotherm were investigated using a batch reactor in the presence of four different background electrolytes($NO_3\;^-,\;CO_3\;^{2-},\;SO_4\;^{2-},\;PO_4\;^{3-}$). Cr(VI) adsorption was greatly reduced in the presence of $SO_4\;^{2-}$ and $PO_4\;^{3-}$ over the entire pH range. Meanwhile the inhibition effect by $NO_3\;^-$ and $CO_3\;^{2-}$ was relatively lower than that by $SO_4\;^{2-}$ and $PO_4\;^{3-}$. Cr(VI) adsorption was maximum around pH 4.5 in the presence of $NO_3\;^-$ and $CO_3\;^{2-}$. As the concentration of background electrolytes increased, Cr(VI) adsorption decreased. This result mightly suggests that adsorption between the surface of RPW and Cr(VI) occurs through outer-sphere complex. Cr(VI) adsorption onto the RPW was well described by second-order kinetics. From the Langmuir isotherm at initial pH 3, the maximum adsorbed amount of Cr(VI) onto the RPW was 11.1, 10, 3.3, 5 mg/g in the presence of $NO_3\;^-,\;CO_3\;^{2-},\;SO_4\;^{2-}$, and $PO_4\;^{3-}$, respectively.
Park H.K.;Xu Migging;Lee K.B.;Choil W.Y.;Choil M.G.;Kim S.S.;Kim C.K.
Korean Journal of Agricultural and Forest Meteorology
/
v.8
no.2
/
pp.45-53
/
2006
The objectives of this study are to determine the primary yield components responsible for yield differences in a subtropical environment of the Hunan province China and in a temperature environment of Honam province Korea. Field experiments were conducted in a subtropical environment in Hunan province China during 2002 and in a temperate environment in Honam province Korea during 2003. Seven rice cultivars were grown under optimum crop management in each experiment field. Yield, yield components and plant dry matter were determined at maturation. The highest yield (567 kg/10a) was produced at Honam province by Jinyou 207, a Chinese cultivar, The maximum yield at Hunan province was 453 kg/10a by Sanyou 63. On the average across cultivars, Honam produced 23% greater yields than Hunan. Sink size (spikelets per $m^2$) was responsible far these yield differences. Panicle number per $m^2$ was much greater at Honam.
Kim, Won-Gon;Oh, Sam-Sae;Kim, Ki-Bong;Ahn, Hyuk;Kim, Chong-Whan
Journal of Chest Surgery
/
v.31
no.9
/
pp.877-883
/
1998
Background: Cardiopulmonary bypass(CPB), a standard adjunct for open heart surgery, can also play an important role in treating patients with noncardiac diseases. Material and Method: We report a collective analysis of noncardiac applications of cardiopulmonary bypass experienced at Seoul National University Hospital from 1969 to 1996. Out of a total of 20 patients, 8 were treated for membranous obstruction of inferior vena cava(MOVC), 5 for malignant melanoma, 3 for pulmonary embolism, 1 for double lung transplantation, 1 for intracranial giant aneurysm(GA), 1 for renal cell carcinoma(RC), and 1 for liposarcoma. CPB was used to induce profound hypothermia with circulatory arrest in 6 patients(MOVC 4, GA 1, RC 1). Result: CPB time was 113 mins on average for MOVC, 161 mins for GA, and 156 mins for RC, while the lowest rectal temperature was 26$^{\circ}C$ on average in MOVC, and 19$^{\circ}C$ in GA and RC. Postoperative recovery was good in all MOVC patients. The patient with GA, who underwent reoperation for the removal of hematoma, died 14 days postoperatively. The patient with RC recovered from the operation in a good condition but died from metastatic spread 6 months later. CPB was instituted for pulmonary embolectomy in 3 patients, in whom postoperative courses were uneventful, except in 1 patient who showed transient neurologic symptoms. CPB was used in a patient with double-lung transplantation for hemodynamic and ventilatory support. The patient was weaned successfully from CPB but died from low output and septicemia 19 days postoperatively. CPB without circulatory arrest was used to treat in 4 patients with MOVC. These patients showed good postoperative courses. CPB was used to administer high concentrations of chemotherapeutic agents to the extremities in 6 patients(malignant melanoma 5, recurrent liposarcoma 1). CPB time was 153 mins on average. No complications such as edema and neurologic disability were found. Conclusion: Although CPB has a limited indication in noncardiac diseases, if properly applied, it can be a very useful adjunct in a variety of surgical cases.
Three experiments on the addition of Porous Calcium Silicate (PCS) to broiler feed were conducted at different time periods in the same house. Each treatment had 4 replicates with 12 chicks in each treatment. Weight gain and feed intake were higher ($P{\le}0.05$) in the control groups. Feed conversions' were better ($P{\le}0.05$) in the PCS group, 3.0% PCS and 20 mesh size of PCS than the control group from 21 to 49 days, and for the overall period. $NH_3$ and $H_2S$. gas production were decreased ($P{\le}0.05$) when zeolite was added in broiler feeds. 1.5% or 3.0% PCS in broiler feed was better ($P{\le}0.05$) than the 4% PCS. More than 90 mesh size PCS was better ($P{\le}0.05$) in controlling $CO_2$ production in the 5th period than the 20 or 50 mesh size or control groups. The control and PCS groups produced more flies ($P{\le}0.05$) than zeolite group during the 2nd and 3rd weeks. The 3.0% or 4.5% PCS or 50 or 90 mesh size of PCS in broiler feed produced more flies than the 20 mesh size or control groups although 50 or 90 mesh size of PCS during 5th week tended to have lower fly production than the 20 mesh size of PCS and control group.
Kim, So-Youn;Park, Jeong-Kil;Hur, Bock;Kim, Hyeon-Cheol
Restorative Dentistry and Endodontics
/
v.30
no.1
/
pp.58-65
/
2005
The purpose of this study was to compare the shaping ability of the three $ProTaper^{(R)}$ instrumentation techniques in simulated canals. Thirty resin blocks were divided into 3 groups with 10 canals each. Each group was instrumented with manual $ProTaper^{(R)}$ (Group M), rotary $ProTaper^{(R)}$ (Group R), and hybrid technique (Group H). Canal preparation time was recorded. The images of pre- and post-instrumented root canals were scanned and superimposed. The amounts of canal deviation, total canal width, inner canal width, outer canal width and centering ratio were measured at apical 1, 2, 3, 4, 5 and 6 mm levels 1. Canal preparation time was the shortest in R group (p < 0.05). 2. The amounts of total canal width in R group was generally larger than the other groups, but no significant differences were observed except at the 1, 3 mm levels (p > 0.05) .3. The amounts of inner canal width in R group was larger than M group at the 1 mm level and H group was larger than R group at the 6 mm level (p < 0.05). The amounts of outer canal width in R group was larger than H group only at the 1 mm level (p < 0.05). 4. The direction of canal deviation in H, R group at the 1, 2, 3 mm levels was outward and that in M group at the 1, 2 mm levels was inward. The amounts of canal deviation in H group was larger than R group at the 6 mm level (p < 0.05). 5. The amounts of centering ratio in H group was larger than R group at the 6 mm level (p < 0.05).
Journal of the Korean Institute of Traditional Landscape Architecture
/
v.35
no.4
/
pp.98-109
/
2017
The results of this study attempting to graft to the space by cognizing and categorizing the characteristic of the under-toned private property to the tablets of the Zhuozhengyuan are as follows. The tablet of Zhuozhengyuan was typed into three groups. In the A group, the frequency of artificial elements including the top, ship, and head was high, and the main emphasis was on the elegance and integrity spirit that the Sunbi(classical scholar) had to have. It has a characteristic of good architects such as pavilion and Nu(樓) is included and as it is adjacent to the water surface the one side of the building is integrated to the water surface. The B group is characterized mainly by the fact that the scenery is portrayed through the climatic factors including rain, wind, and snow, or the scene atmosphere and it is located at the top of the summit which is good for viewing the scenery. In the C group, plant elements such as lotus, magnolia, plum, and bamboo appeared frequently, and various buildings such as pavilion, Kwan(館), Gak(閣) and Dang(堂) belong to this structure. The structure has the characteristic of integrating directly with the water surface or putting the terrace between and scattering throughout the whole garden. Furthermore, this study identified area characteristics based on the frequency of the tablet type. In the west area, Group A is mostly distributed and the humor and concept implied in the tablet, combined with the shape and location of the scenery, viewpoint of the viewer, and the composition of the landscape, improved the orderliness of the space, which led to expand the scope of the enjoyment to the entire space. Meanwhile, in the middle area, tablets of Group C are mostly distributed, and the unique characteristics and shapes of the woody plants that were used as the name of the tablet were connected with various buildings including pavilion, Dang, Kuan, and Gak, improving the unique identity of the space and forming connection with the world of ideas through unity and independence.
Prefetching is an effective method to minimize the number of roundtrips between the client and the server in database management systems. In this paper we propose new notions of the type-level access pattern and the type-level access locality and developed an efficient prefetchin policy based on the notions. The type-level access patterns is a sequence of attributes that are referenced in accessing the objects: the type-level access locality a phenomenon that regular and repetitive type-level access patterns exist. Existing prefetching methods are based on object-level or page-level access patterns, which consist of object0ids of page-ids of the objects accessed. However, the drawback of these methods is that they work only when exactly the same objects or pages are accessed repeatedly. In contrast, even though the same objects are not accessed repeatedly, our technique effectively prefetches objects if the same attributes are referenced repeatedly, i,e of there is type-level access locality. Many navigational applications in Object-Relational Database Management System(ORDBMs) have type-level access locality. Therefore our technique can be employed in ORDBMs to effectively reduce the number of roundtrips thereby significantly enhancing the performance. We have conducted extensive experiments in a prototype ORDBMS to show the effectiveness of our algorithm. Experimental results using the 007 benchmark and a real GIS application show that our technique provides orders of magnitude improvements in the roundtrips and several factors of improvements in overall performance over on-demand fetching and context-based prefetching, which a state-of the art prefetching method. These results indicate that our approach significantly and is a practical method that can be implemented in commercial ORDMSs.
Total upland area for cultivating the vegetable crops in the Alpine soils of Northeastern South Korea has been extending its limit to meet the increasing demand of vegetable food in recent decades. About 70% of these alpine soils are located in over 7% of the slope and most of vegetable crops have been cultivated intensively without practicing the best management systems. Thus, soil erosion and continuous cropping system have degenerated the soil fertility and shown detrimental effects on water quality. We initiated an intensive and extensive investigation to characterize the fertility problems encountered in these uplands. Objectives of this paper were to characterize the fertility status in the Alpine soils cultivated with vegetable crops for many years and to provide the recommendations for adequate soil management measures including fertilization and erosion control. Soils in general have good drainage with textural classes of loam or sandy loam. Their topographical characteristics tended to lead them to shallow plow layers, and the steepness of the terrain created erosion hazard. Of the soils examined, about 11% of uplands over 30% gradient was found in need of an urgent reforestation. A high content of gravel and firm hardness of soil attributed to inhibit the utilization of farm machinery and plant-root development. The average soil pH 5.6 was slightly low relative to pH 5.70 of the national average. Organic matter content was high compared with 2.0% of national average, but decreased with the prolonged cultivation periods. Available $P_2O_5$ concentration was unusually high due to the consequence of over dose application with chemical and organic fertilizers. Exchangeable cations as Ca, Mg, and K were appeared to be decreased in these regions with prolonging the cultivation periods. There were no significant differences in cation exchange capacity (CEC) and electrical conductivity (EC) among locations. Heavy metal contents were mostly lower than the threshold of danger level designated by Soil Environment Conservation Law of South Korea. Results indicated that a proper countermeasure and the best management practice should be immediately implemented to conserve the top soil and fertility in the Alpine regions.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.16
no.4
/
pp.135-151
/
2021
This research attempts to analyze the factors influencing the entrepreneurial intention of employees in manufacturing field. In particular, key factors of entrepreneurship and personal characteristics explain a significant association with the intention to start-up. And study whether R&D support from public enterprise adjusts intention to entrepreneurial Intention. This study conducted a online survey on 292 small and medium-sized enterprise manufacturing employees in May 2020. Using linear regression model and binary logistic model. The main study results are the following: First, among the key factors(innovativeness, proactiveness, risk-taking) of entrepreneurship, proactiveness hardly influenced the opportunity competency. Second, among the factors(risk-taking propensity, locus of control, tolerance for ambiguity) of personal characteristics, locus of control hardly influenced the opportunity competency. Third, opportunity competency(opportunity recognition and opportunity evaluation) had positive influence to entrepreneurial intention. Fourth, the study investigated the mediated effect of opportunity competency. The result showed that among the factors of entrepreneurship and personal characteristics, only two factors that are proactiveness and locus of control were not mediated by opportunity competency. and opportunity evaluation was acted as a mediator between proactiveness and entrepreneurial Intention, compared with opportunity recognition. Lastly, public enterprise's R&D supporting moderated the entrepreneurial intention). Based on the result, the study showed that first, the key factors of entrepreneurship except for proactiveness and personal characteristics(risk-taking propensity, locus of control, tolerance for ambiguity) except for locus of control affect the intention to start-up, repeatedly. This results are explained that employees have not started a business yet. Second, research on start-up suggests the need to analyze factors differentiated before and after the start-ups. Based on the results, entrepreneurship and personal characteristics show that study on the effects of start-up intentions should be carried out before and after the actual start-up takes place, and can be used as effective data in policies to promoting start-ups in manufacturing field.
The purpose of this study was to excavate the items of the comprehensive maintenance plan for scenic sites considering sustainability and analyze the needs of them. In this sense, based on 35 reports of the comprehensive maintenance plan established between 2006, when scenic sites started to be designated, and 2017, the items used in 'investigation field' and 'planning field' were examined, and then a survey regarding the needs of the items was conducted using a "5-point Likert Scale", targeting officials at 60 local governments in the whole country. Of 60 local governments, opinions from 48 officials at 45 local governments were analyzed. In order to verify the consistency of their opinions, "Reliability Analysis" was conducted, and Cronbach's alpha coefficient was 0.968 and 0.970 for 'investigation field' and 'planning field', respectively, showing high reliability. As a result of the survey, most opinions generally expressed the needs of 6 items of 'investigation field' of the comprehensive maintenance plan. Especially, the needs to investigate 'historical environment', 'natural environment', 'humanistic environment', and 'landscape' turned out to be high. In addition, as for 'general environment' and 'users', the needs of specific items such as 'distribution of main cultural properties and historic sites' (4.04) and 'acceptance of opinions from local residents and interested parties' (4.15) were found to be high. Besides, the items of 'planning field' also turned out to be needed in general (4.0). Particularly, the needs of 'enhancement of designated value and status' (4.26) and 'the comprehensive maintenance plan for designated areas of cultural properties and historic and cultural environment preservation areas' (4.25) in 'historical environment', 'maintenance of historic buildings at scenic sites' (4.28) in 'humanistic environment', and 'landscape trail planning' (4.28) in 'landscape' were found to be high. In conclusion, the practical items related to investigation and planning of the comprehensive maintenance plan for scenic sites are expected to contribute to effective conservation and management of scenic sites in the future.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.