• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.47-54
• /
• 2000

We designed asynchronous event logic library with 0.25um CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6GHz. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A Method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about $1.1mm{\times}1.1mm$.

• The KIPS Transactions:PartB
• /
• v.16B no.6
• /
• pp.497-502
• /
• 2009

In this paper, we introduce an automatic product feature extracting system that improves the efficiency of product review analysis. Our system consists of 2 parts: a review collection and correction part and a product feature extraction part. The former part collects reviews from internet shopping malls and revises spoken style or ungrammatical sentences. In the latter part, product features that mean items that can be used as evaluation criteria like 'size' and 'style' for a skirt are automatically extracted by utilizing term statistics in reviews and web documents on the Internet. We choose nouns in reviews as candidates for product features, and calculate degree of association between candidate nouns and products by combining inner association degree and outer association degree. Inner association degree is calculated from noun frequency in reviews and outer association degree is calculated from co-occurrence frequency of a candidate noun and a product name in web documents. In evaluation results, our extraction method showed an average recall of 90%, which is better than the results of previous approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.1009-1018
• /
• 2003

A new fading channel estimation technique is proposed for an OFDM based modem In the ITS system. The algorithm is based on the transfer function extraction of the channel using the pilot signals and compensated the channel preceding the equalization. The newly derived algorithm is division-free arithmetic operations allows the faster circuit operation and the smaller circuit size. Proposed techniques compensate firstly the distortion which is generated at fading channels and secondly eliminate inter-symbol interference. All algorithms are suitability estimated and improved for a system implementation using digital circuits. As the results, the circuit size is reduced by 20% of the conventional design and achieved about 10% performance improvement at low SNR under 10dB in case of ITS system adapted 16-QAM mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1439-1444
• /
• 2013

Recently, as the use of the applications like online banking and stock trading is increasing by the rapid development of the network, security of data content is becoming more and more important. Accordingly, public key or symmetric key encryption algorithm is widely used in open networks such as the internet for the protection of data. Generally, public key cryptographic systems is based on two famous number theoretic problems namely factoring or discrete logarithm problem. So, public key cryptographic systems is relatively slow compared to symmetric key cryptography systems. Among public key cryptographic systems, the advantage of ECC compared to RSA is that it offers equal security for a far smaller key. For this reason, ECC is faster than RSA. In this paper, we propose a efficient key generation method for elliptic curve cryptography system based on the real number field.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2013

Plasma display panel (PDP) televisions are facing to have a new chance to receive attention along with a boom in 3-D software and contents because PDP can provide the comfortable and realistic 3-D images. The PDP has three driving circuit boards such as X, Y and addressing boards. Cost effective driving waveform has already been reported to decrease the number of driving circuit board. Half bridge based sustaining driver can remove a sustaining driver in the X board. However, the biasing circuit in the X driving boards cannot be reduced because there are some drawbacks such as unstable gas discharge condition and unreliability of an address driver IC. In this paper, the half bridge based sustaining driver is considered and a simple address driver is proposed to remove one driving board, X driving board. The stable gas discharge condition, reliability of the address driver IC and the low cost can be obtained by the proposed circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.11-18
• /
• 2007

FFT(Fast Fourier Transform) processor is one of the key components in the implementation of OFDM systems such as WiBro, DAB and UWB systems. Most of the researches on the implementation of FFT processors have focused on reducing the complexities of multipliers, memory and control circuits. In this paper, to reduce the memory size required for IFFT(Inverse Fast Fourier Transform), we propose a new IFFT design method based on a mapping method. By simulations, it is shown that the reposed IFFT design method achieves more than 60% area reduction and much SQNR(Signal-to-Quantization-Noise Ratio) gain compared with previous IFFT circuits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.93.1-93.1
• /
• 2015

근래 디스플레이 분야에서 OLED가 시장을 주도하면서 이 공정에 가장 적합한 진공펌프로 크라이오 펌프가 주목을 받고 있다. 화소 형성 공정에 사용되는 유기물이 수분에 취약하기 때문인데, 크라이오 펌프가운데서 특별히 수분만 집중적으로 배기할 수 있는 워터펌프(CWP or cold trap)가 각광받고 있다. 이에 HM GVT는 중소기업청 중소기업개발지원사업의 일환으로 진행된 2014년도 구매조건부 신제품 개발사업에 선정되어 '극저온 G-M냉동기를 이용한 대용량 Cold Trap개발' 과제를 수행하면서 32인치 급으로 수분에 대해서 30,000 [L/s] 이상의 배기속도를 가지는 대형 CWP를 개발하고 있다(수요처: (주)아바코). 통상적으로 흡기구가 30인치라면 수분 배기속도는 대략 65,000 L/s에 이르고 200 W 냉각능력이면 최대 수분 분압 0.008 mbar에서 작동시킬 수 있다. 따라서 1차년도의 목표는 큰 배기용량과 대형 사이즈의 CWP를 개발하기 위해 80 K에서 200 W 이상의 냉동능력을 보유한 단단 G-M 극저온냉동기를 선행 개발하는 것이다. 이에 현재 최대 냉동능력 80 K에 130 W의 냉동능력을 가지는 HPS055모델을 이용하여 다양한 예비시험들을 수행하여 최적의 설계인자들을 도출하였고 이를 근거로 80 K에서 200 W 이상의 냉동능력을 가지는 HPS80200모델을 설계 및 제작, 성능시험을 수행하였다. 이에 국내 최초로 80 K에서 200 W의 냉동능력을 가지는 단단 G-M냉동기를 개발하였고 설계 및 제작에 대한 원천기술을 확보할 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.200-203
• /
• 2016

최근 자율주행자동차에 대한 관심이 증가함에 따라 교통 상황을 인식하는 방법에 대한 연구도 활발하게 진행되고 있다. 특히 교통신호등의 인식은 치명적인 결과를 야기하는 교통사고와 밀접하게 연관된다는 점에서 중요성이 더욱 부각되고 있다. 본 논문에서는 컴퓨터 비전 시스템을 기반으로 한 교통신호등 인식 방법을 제안한다. 차선, 표지판 등과는 다르게 교통신호등은 빛을 발하는 특징이 있으며 그 모양과 형태 또한 규격화 되어 있다. 이러한 특징 중 색상과 형태 특징을 이용하여 두 단계의 추출과정을 거쳐 교통신호등을 인식한다. 먼저 HSV 색 공간에서 적색, 녹색, 주황색의 빛을 발하는 영역을 찾아낸 뒤, 신호의 원형 특징을 이용해 가로, 세로 사이즈와 크기로 신호의 후보를 추출한다. 다음, 신호등의 검은 박스 영역을 찾기 위해 추출한 신호 후보군의 주변부가 검정색인지를 확인한다. 최종적으로 신호등의 박스 부분을 검출하여 신호를 발하는 위치를 기반으로 신호를 인식한다. 실험결과 많은 계산량을 요구하는 기계학습을 사용하지 않고도 실시간 처리와 높은 인식률로 교통 신호를 인식할 수 있음을 확인하였다.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1229-1239
• /
• 2007

In conversion of web pages for mobile devices, since existing web conversion systems eliminate unnecessary objects indiscriminately or only convert the layout of a page, the original intention of a web designer is spoiled. In spite of great advances in device technology, there still remain the problems of limited display sire and insufficient CPU power. In this paper, we propose an adaptation method that minimizes the loss of information and preserves the original intention of a web designer from the visual aspect. In image conversion, the proposed method extracts meaningful information from the background against conventional resizing methods, and performs layout-based conversion for the arrangement of image components. Experimental results show the efficiency of the method on the accuracy and the usability in comparison with existing methods.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.269-276
• /
• 2012

The aim of this study is to develop clothing size system according to each size interval for obese girls aged 10~12 by classifying the upper bodies. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. Results are as follows; 1st, 5 factors were extracted by factor analysis and 3 clusters were categorized by cluster analysis, cylinder-type, inverted triangle-type and inverted trapezoid-type. And 2nd, as a consequence of size system establishment, the basic body sizes and reference body sizes were different according to types even in commonly-appeared size names at sections of respective types. The research findings above suggest that it is necessary to figure out the obesity types according to height and bust girth sizes representing basic sizes and to design the patterns in consideration of the characteristics of obese body shapes. And it may be used as a basic data to decide the desirable output of production according to respective body types.