• Research in Plant Disease
• /
• v.28 no.2
• /
• pp.82-91
• /
• 2022

Recently, several in vitro studies have reported antiviral activity of agents of systemic acquired resistance against plant virus infection, but the approach has not been applied in a wide range of agricultural fields. The objective of this study was to evaluate the inhibitory effect of the exogenous application of salicylic acid (SA), chitosan (CH), or eugenol (EG) in tomato yellow leaf curl virus (TYLCV) infection of greenhouse-grown tomato plants. In vitro, the initial time of symptom was observed in TYLCV-infected plants (VP) of the resistant cultivar 'Superdotaerang' at 12 days post inoculation (dpi) after application of antiviral agents. At 32 dpi, the disease rate of TYLCV in the CHT+VP (0.1% chitosan and virus infected control) treated plants was 87.5%, lower than that of the other treatment. However, the virus content in the CHT+VP treated plants was higher than those of the other treatments, and SA, EG, and CH did not show significant effect on plant height or shoot and root fresh weight. Our results from summer-cultivated greenhouse-grown tomatoes show that none of the tested agents had an inhibitory activity on viral infection or yield of tomato 'Dotaerangsola'cultivar. In contrast, all treated 'TY Giants' cultivars that possessed TYLCV resistance genes Ty-1 and Ty-3a did not show typical symptoms and the virus content was remarkably lower than those in the TYLCV treated plants in 'Superdotaerang'. The results of this research indicated that the planting of resistant tomato cultivars was effective method instead of using SA, EG, and CH (known as resistance-inducing factors for control) of TYLCV in the field.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.23-32
• /
• 2023

Probabilistic and deterministic analyses are implemented for the armor units of rubble foundation mound of composite breakwaters which is needed to protect the upright section against the scour of foundation mounds. By a little modification and incorporation of the previous empirical formulas that has commonly been applied to design the armor units of foundation mound, a new type formula of stability number has been suggested which is capable of taking into account slopes of foundation mounds, damage ratios of armor units, and incident wave numbers. The new proposed formula becomes mathematically identical with the previous empirical formula under the same conditions used in the developing process. Deterministic design have first been carried out to evaluate the minimum weights of armor units for several conditions associated with a typical section of composite breakwater. When the slopes of foundation mound become steepening and the incident wave numbers are increasing, the bigger armor units more than those from the previous empirical formula should be required. The opposite trends however are shown if the damage ratios is much more allowed. Meanwhile, the reliability analysis, which is one of probabilistic models, has been performed in order to quantitatively verify how the armor unit resulted from the deterministic design is stable. It has been confirmed that 1.2% of annual encounter probability of failure has been evaluated under the condition of 1% damage ratio of armor units for the design wave of 50 years return period. By additionally calculating the influence factors of the related random variables on the failure probability due to those uncertainties, it has been found that Hudson's stability coefficient, significant wave height, and water depth above foundation mound have sequentially been given the impacts on failure regardless of the incident wave angles. Finally, sensitivity analysis has been interpreted with respect to the variations of random variables which are implicitly involved in the formula of stability number for armor units of foundation mound. Then, the probability of failure have been rapidly decreased as the water depth above foundation mound are deepening. However, it has been shown that the probability of failure have been increased according as the berm width of foundation mound are widening and wave periods become shortening.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.229-236
• /
• 2022

This study was conducted to evaluate the efficacy of adding the microbial inoculants to silage for reducing mycotoxins in rice straw silage. When a single agent of L. plantarum and a mixed agent of L. plantarum and S. cerevisiae were added in rice straw silage contaminated mycotoxins, it had an effect on silage fermentation and fiber degradation as well as mycotoxin reduction. Among the mycotoxins, only ochratoxin A and zearalenone were found in the test sample. Ochratoxin A and zearalenone showed a decreasing trend with the addition of silage inoculants compared to the control groups (38.11±2.22 and 633.67±50.30 ㎍/kg), and there was a significant difference at the mixed agents; 27.78±2.28 and 392.72±25.04 ㎍/kg, respectively (p<0.05). The pH was lower in the single agent and the mixed agent compared to the control (p<0.05). The concentration of lactic acid was higher in the single agent (11.73±0.31 mM) than in the control group (8.18±0.93 mM), and the highest concentration was 16.01±0.88 mM in the mixed agent (p<0.05). Acetic acid and propionic acid were found to be significantly lowered with the addition of silage inoculants (p<0.05). Total VFA was also lower at the addition of silage inoculants than the control group (p<0.05). The rumen in situ dry matter degradation of NDF and ADF was maintained at the highest levels of the mixed agent during the culture period, followed by the single agent and the control group at the lowest level. NDF and ADF degradation showed a significant difference at all time points after 12 and 24 hours of culture, respectively (p<0.05). The study results showed that the silage inoculants had the positive effects on quality increasing of rice straw silage; fermentative charateristics, fiber degradation and mycotoxins reduction. Ochratoxin A and zearalenone were greater reduction by adding bacterial inoculants of silage. Therefore it is considered that L. plantarum and S. cerevisiae will improve the quality and stability with remediation of mycotoxin in silage.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.605-614
• /
• 2022

Two major problems currently threaten human survival on Earth: climate change and the rapid aging of the population in developed countries. Climate change is a result of the increase in greenhouse gas (GHG) concentrations in the atmosphere due to the increase in the use of fossil fuels owing to economic and transportation development. The rapid increase in the age of the population is a result of the rise in life expectancy due to the development of biomedical science and technology and the improvement of personal hygiene in developed countries. To avoid irreversible global climate change, it is necessary to quickly transition from the current fossil fuel-based economy to a zero-carbon renewable energy-based economy that does not emit GHGs. To achieve this goal, the dairy and livestock industry, which generates the most GHGs in the agricultural sector, must transition to using low-carbon emission production methods while simultaneously increasing consumers' preference for low-carbon diets. Although 77% of currently available arable land globally is used to produce livestock feed, only 37% and 18% of the proteins and calories that humans consume come from dairy and livestock farming and industry. Therefore, using edible insects as a protein source represents a good alternative, as it generates less GHG and reduces water consumption and breeding space while ensuring a higher feed conversion rate than that of livestock. Additionally, utilizing the functionality of medicinal insects, such as silkworms, which have been proven to have certain health enhancement effects, it is possible to develop functional foods that can prevent or delay the onset of currently incurable degenerative diseases that occur more frequently in the elderly. Insects are among the first animals to have appeared on Earth, and regardless of whether humans survive, they will continue to adapt, evolve, and thrive. Therefore, the use of various edible and medicinal insects, including silkworms, in industry will provide an important foundation for human survival and prosperity on Earth in the near future by resolving the current two major problems.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.105-148
• /
• 2023

This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.75-88
• /
• 2023

The aim of this retrospective study was to evaluate the demographic characteristics of pediatric dental patients who underwent dental treatment under general anesthesia (DTGA) at the Seoul National University Dental Hospital from January 2011 through December 2020 and compare the patterns of repeated DTGA between dental patients with severe disabilities (DSD) and non-DSD (healthy or medically compromised patients without DSD). There were 1,857 DTGAs among 1,719 patients (mean age = 5.1 years; males = 59.3%; ASA 2 or above = 52.9%; DSD = 26.8%). Overall, 6.6% of patients underwent repeated DTGA, and the rate of repeated DTGA over a 10-year period was 7.4%. ASA 2 or above (p < 0.0001) and DSD (p < 0.0001) were more likely to undergo repeated DRGA compared to ASA 1 and non-DSD. At both GA1 and GA2, DSD received significantly more restorative treatment on permanent teeth than non-DSD (p = 0.002, p < 0.0001, respectively). There has been an increasing demand for DTGA in pediatric dentistry over the last 10 years. Regular check-ups and preventive oral health care are necessary for pediatric dental patients with severe disabilities to reduce the possibility of repeated DTGA.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.267-274
• /
• 2022

Excess nitrogen (N) flowing from livestock manure to water systems poses a serious threat to the natural environment. Thus, livestock wastewater management has recently drawn attention to this related field. This study first attempted to obtain the optimal conditions for the further volatilization of NH₃ gas generated from pig wastewater by adjusting the amount of injected magnesia (MgO). At 0.8 wt.% of MgO (by pig wastewater weight), the volatility rate of NH₃ increased to 75.5% after a day of aeration compared to untreated samples (pig wastewater itself). This phenomenon was attributed to increases in the pH of pig wastewater as MgO dissolved in it, increasing the volatilization efficiency of NH₃. The initial pH of pig wastewater was 8.4, and the pH was 9.2 when MgO was added up to 0.8 wt.%. Second, the residual ammonia nitrogen (NH₄⁺-N) in pig wastewater was removed by precipitation in the form of struvite (NH₄MgPO₄·6H₂O) by adjusting the pH after adding MgO and H₃PO₄. Struvite produced in the pig wastewater was identified by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analysis. White precipitates began to form at pH 6, and the higher the pH, the lower the concentration of NH₄⁺-N in pig wastewater. Of the total 86.1% of NH₄⁺-N removed, 62.4% was achieved at pH 6, which was the highest removal rate. Furthermore, how struvite changes with pH was investigated. Under conditions of pH 11 or higher, the synthesized struvite was completely decomposed. The yield of struvite in the precipitate was determined to be between 68% and 84% through a variety of analyses.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.150-164
• /
• 2022

This study was conducted to provide basic information for the development of silvicultural guidelines and manuals. This was achieved through analysis of tree and stand characteristics according to the first and second thinning in Korean white pine plantations. Data were collected from permanent plots installed at Korean white pine plantations according to thinning intensity, and residual tree and stand variables, including diameter at breast height (DBH), volume, and mortality at age 19-43, were analyzed using data repeatedly collected in 4-5 measurements by experiments. According to one-way variance of analysis, tree DBH and volume were significantly different according to thinning intensity (p<0.05). DBH distribution was skewed to the left side over time as thinning intensity was heavier. Thus, tree DBH values were larger in heavy thinning plots with increased age. The periodic annual increment (PAI) of DBH was higher with heavier thinning intensity and fewer years after thinning. The PAI range by thinning intensity was 0.48-0.95 cm/year at age 19-24. In addition, the PAI increased in heavy thinning plots after the second thinning; The PAI range by thinning intensity was 0.29-0.67 cm/year after the second thinning at age 37-42. The PAI of tree volume differed according to thinning intensity, and the PAI value did not decrease obviously, in contrast to the pattern of the DBH PAI. Stand volume was generally higher in high-density stands, and the PAI of stand volume was high in unthinned and light thinning plots. Mortality was highest in unthinned plots, and the differences in mortality according to thinning intensity increased over time. Consequently, the growth of DBH and tree volume was lower as stand density increased, but this growth was facilitated with appropriate first and second thinning operations.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.327-335
• /
• 2019

Purpose: To investigate the radiological efficacy of polymethylmethacrylate (PMMA) augmentation of pedicle screw operation in osteoporotic vertebral compression fractures (OVCF) patients. Materials and Methods: Twenty OVCF patients, who underwent only posterior fusion using pedicle screws with PMMA augmentation, were included in the study. The mean follow-up period was 15.6 months. The demographic data, bone mineral density (BMD), fusion segments, number of pedicle screws, and amount of PMMA were reviewed as medical records. To analyze the radiological outcomes, the radiologic parameters were measured as the time serial follow-up (preoperation, immediately postoperation, postoperation 6 weeks, 3, 6 months, and 1 year follow-up). Results: A total of 20 patients were examined (16 females [80.0%]; mean age, 69.1±8.9 years). The average BMD was -2.5±0.9 g/cm². The average cement volume per vertebral body was 6.3 ml. The mean preoperative Cobb angle of focal kyphosis was 32.7°±7.0° and was improved significantly to 8.7°±6.9° postoperatively (p<0.001), with maintenance of the correction at the serial follow-up, postoperatively. The Cobb angle of instrumented kyphosis, wedge angle, and sagittal index showed similar patterns. In addition, the anterior part of fractured vertebral body height averaged 11.0±5.0 mm and was improved to 18.5±5.7 mm postoperatively (p=0.006), with maintenance of the improvement at the 3-month, 6-month, and 1-year follow-up. Conclusion: The reinforcement of pedicle screws using PMMA augmentation may be a feasible surgical technique for OVCF. Moreover, it appears to be appropriate for improving the focal thoracolumbar/lumbar kyphosis and is maintained well after surgery.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.96-116
• /
• 2022

The Daebodan was an altar, which held a memorial service for emperors of the Ming dynasty. This alter, which was referred to as Hwangdan, was first constructed in 1704. When the Japanese Invasion of Korea commenced in 1592, Shinjong, the emperor of the Ming dynasty, sent reinforcements to Josun to help. This alter was made to repay Shinjong's kindness. Before this, Song-siyeol(宋時烈), Leader of Noron(老論), made a shrine at Hwayangdong to hold memorial services for Shinjong, and after some time, this developed into a national ceremony. Construction of the Daebodan largely changed the backyard of Changdukgung-palace. However considering the construction process, the meaning of the Daebodan was not a big deal. At first, the optimal place for the Daebodan was selected at the site of a inner icehouse. But the inner icehouse could not be transferred to other site due to the circumstances. After all, the Daebodan was constructed at the site of Byeoldaeyeong(別隊營) which was located in the outside of palace. Most of the stones for the new Daebodan were used ones. And the annexe of Byeoldaeyeong was used for Daebodan without any changes being made. The scale of the construction was not particularly grand. After the construction, Sukjong, who made the Daebodan, showed barely any interest in it. But the conception of the Daebodan was back again in the history by Youngjo. He was also not interested in the Daebodan during his early years of ruling time. However, in the 1740's, he started to become interested in the ceremony of Daebodan, and carried out a large-scale reconstruction of the Daebodan. Jegigo(祭器庫) was rebuilt In 1739. And Jaesil(齋室), staying one night before the ceremonial day, was added in 1745. In 1749, the Daebodan was greatly changed by enshrining Uijong and Taejo, emperors of the Ming dynasty. The shape of alter was changed. Moreover this alter was made by newly quarried stones. And several buildings, Junsachung(典祀廳), Jaesaengchung(宰牲廳) and Akgongchung(樂工廳), were added to the site. In 1762, meritorious retainers were enshrined to the Daebodan. After all the Daebodan became an important part of the backyard of Changdukgung-palace. During the reign of Jungjo, the Daebodan also was an important part of backyard of Changdukgung-palace. But significant changes were not made at that time. The only change was the moving of Kyungbonggak(敬奉閣) in 1799. Afterward the Daebodan remained unchanged. The ceremonies at the Daebodan stopped in 1908. And the Daebodan disappeared into the mist of history.