• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.55-62
• /
• 2000

심층혼합처리공법에 의해 개량된 연약지반상에 사석제를 축조한 후 배면매립을 실시할 경우 사석호안의 변형거동을 관찰하기 위해 계측을 실시하였다. 개량지반상에 사석호안을 축조하기 위한 설계기준을 마련하기 위하여 유한요소법을 이용한 지반변형해석과 Bishop의 간편법을 이용한 사면안정해석을 실시하였다. 이들 해석을 사석제부, 연약지반부 그리고 뒷채음성토부의 토질조건 및 형상이 다른 여러 경우에 대하여 실시하여 그 결과를 서로 비교 분석하였다. 즉, 해석결과를 이용하여 사석제 정사부에서의 수평변위량과 침하？을 호안의 사면안정률과 연과지어 검토하였다. 본 연두결과 사석호안의 사면안전률 1.3보다 낮을 경우 상당히 큰 지반변형이 발생하는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.108-111
• /
• 2012

최근에 태풍 매미 등 이상 기후로 인한 기상이변이 빈번히 발생함에 따라 그에 대한 대처방안을 모색하기 위해 2005년 해양수산부에서는 지역 및 해역별 특성을 분석하여 종전 설계기준을 강화하였다. 하지만, 기존에 설계된 항만 구조물의 마루높이 및 피복재 중량 등이 새로 개정된 설계기준에 미치지 못하는 등 안전성에 대한 문제가 발생하고 있으며, 이러한 문제점을 개선하기 위해 기존 방파제를 보강하는 여러 방식이 제안되고 있다. 그 중 부유식방파제는 해수의 소통을 방해하지 않는 친환경적인 구조물로써, 연약지반에 시공이 가능하고 시공 시 오탁이 적게 발생하여 시공이 편하다는 장점을 가지고 있다. 또한 구조물의 해체 및 보강시 건설폐기물을 발생시키지 않는 친환경적인 구조물이기 때문에 새로운 방식의 대체 외곽항만구조물로 관심을 받고 있다. 이에, 본 연구에서는 사석경사제 전면에 부유식구조물을 설치하여 방파제 보강하는 방안을 제시하고자, 부유식구조물을 통과한 파랑이 사석경사제와 만나 발생하는 처오름높이를 분석하였다. 본 수치모의에서는 유체의 점성 및 난류특성을 포함하고 있는 Navier-Stokes 방정식을 그대로 해석하는 2차원 수치파동수조(CADMAS-SURF)를 이용하여 수치 모의을 수행하였다. 부유식구조물은 불투수성구조물로 수면에 고정시키는 방식을 적용하여 사석경사제의 전면에 설치하였으며, 고정된 부유식구조물의 흘수심을 변화시켜 사석경사제에서의 처오름높이를 산정하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.145-153
• /
• 2009

This research utilized the manual to calculate the structural scale of stone and gabion, which was developed through comparison and verification of the results drawn by hydraulic model experiment and existing empirical formula. Appropriate structural scale of stone according to the construction site when the critical velocity was exceeded, utilizing the previously expected and recorded data on current velocity per day and per hour during the final closure period for Saemangeum sea dike. Also, the scale of rocks was presented, considering the altercation in water depth according to the construction. The developed manual offered appropriate rate of mixed use of stone and gabion that suits various flow velocities, which will minimize any loss of stone-gabion and contribute to successful final closure, and proved the utility and application of the manual.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.63-72
• /
• 2005

Rocks are dumped to soft marine ground in order to improve trafficability and construction conditions in the tideland reclamation construction sites. Though this rock layer under earth fill has caused in a serious seepage problems after construction, seepage behaviors of this embankment structure is not correctly investigated. Water flow through rock layers is, in general, known as Non-Darcy's flow. However, the embedded rock layer under earth fill is not known whether its flow is governed by Darcy's or Non-Darcy's law. Therefore, a numerical analysis, laboratory model test and filed investigations were performed for analyzing the those seepage characteristics in this research. Results show that there is significance of $95\%$ of confidence between observed heads and seepage rates, and the calculated ones by SAMTLE which is developed under the assumption that the water flows through the two-layer system obey the Darcy's flow. And after operating the hydraulic gradient(i) of $0.10\~0.55$ upon laboratory model, these seepage characteristics of the embedded rock layer show that Reynolds Numbers are less than 10 and the relationship between these velocities of rock layer(v) and hydraulic gradients(i) is linearly proportional with more than 0.79 of the coefficient of correlation $(R^2)$. And the Reynolds Number of the velocity calculated by the relation of v=ki in the embedded rock layer of OO sea dike is $1\~6$. It shows also laminar flow. Based on these results, it is concluded that the seepage characteristics of embedded rock layer under earth fill can be laminar and Darcy's flow.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.136-144
• /
• 2009

This paper focuses on the attempt to manual application for optimization structural scale of stone and Gabion at the closing gap of sea dike. The manual was developed through hydraulic model experiment that measured the critical velocity of sill-crest, bottom protection and dam-face at the final closure of Saemangeum sea dike, and through the comparison and verification of critical velocity for each scale calculated by existing empirical formula. Also, the critical velocity when rocks are used together with gabion is measured to add to the manual, which is an initial attempt that had not been executed before. The manual proposes the appropriate structural scale according to the measured critical velocity per day during the final closure period of Saemangeum sea dike, and its application was appraised highly after the completion of the final closing.

• KCID journal
• /
• v.2 no.2
• /
• pp.37-45
• /
• 1995

In this study, formulae related tidal current-stone diameter and weight have been analyzed based on the real sea dike construction situation. Three formulae which denoted Shields, Isbash and Netherlands's simple method have been compared by the various ti

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.178-182
• /
• 2004

To establish the design criteria for construction of the rubble mound on improved ground, two kinds of analyses for the soil deformation behavior and the slope stability were performed on various cases for rubble mounds, soft grounds and back fills with application of the finite element method and the Bishop simplified method. The horizontal displacements and settlements at the crest of rubble mounds were analyzed as a function of the safety factor of embankments. The analyzed result shows that the soil movement increases considerably when the safety factor of rubble mounds is lower than 1.3.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.1
• /
• pp.25-32
• /
• 2006

Sea dyke construction is simply defined as a cutting procedure of sea water flow. Sea dyke construction is more difficult than in-land construction because it is placed on deep seabed and exposed sea wave attack. Especially, the final closure of sea dyke is most dangerous due to the fast velocity of tidal flow. The final closure is consisted with vast rubble and heavy stone gabion, therefore the discharge velocity at land side of final close section is irregularly and sometime occur the fast discharge velocity. In this paper, the seepage model test performed to evaluate seepage behavior of final closure and continuous sea dyke section such as discharge velocity, hydraulic gradient, and phreatic line with installation of bottom protection filter mat. Based on the seepage model test results, the maximum discharge velocity of final closure section is 1.7m/sec and the discharge velocity is decreased maximum 23.7% with installation of bottom protection filter mat.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.78-83
• /
• 2000

When a sea-dike is constructed on soft soils, it is much difficult to calculate ground deformation caused by forced displacements. In this study , a series of laboratory model tests have been performed to investigate the ground deformation under a constructed sea-dike on soft soils. Construction sequence of sea-dike embankment was assumed such as constructed by quarry first and followed by soils adjacent to quarry embankment. as test data and displacement in subsoils have been analyzed, it seems that deformation is caused by general shear failure. the shape of ground deformation caused by forced displacements was well defined be parabola . Upon comparing profiles and depth of forced displacement from the model test to those based on stress-baring capacity method commonly used, it has been found that deformation prediction using stress-bearing capacity method was not exact at the edge of loading.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.397-404
• /
• 2010

Laboratory tests of wave overtopping rates for a rubble mound breakwaters armoured Tetrapod were carried out, with varying design waves, crest berm widths and crest freeboards. The objective of this study is to investigate overtopping performance and to examine the characteristics of the widely used overtopping prediction models through the results of laboratory tests. Laboratory tests show that structure slope and wave periods have a considerable influence on overtopping rates, but the difference of overtopping rates related to crest berm widths is slight. Owen(1980)'s prediction considerably overestimates compared to the measured valued. Prediction of Van der Meer et al.(1998) underestimates only for steep slope($cot{\alpha}$=1.5). Besley(1999)'s and Pedersen(1996)'s predictions have a relatively good agreement with the measured results for slopes with a broader crest berm width. In general, best agreement between measured and predicted overtopping rates is observed using modified Pedersen(1996)'s formula for all test conditions.