• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.287-295
• /
• 1998

Limit equilibrium method is widely used for the stability analysis of soil slopes. In jointed rock slopes however, the failure of the slope is largely dependent upon the strength and deformability of the joints in the rock mass and quite often failure occurs along the joints. This paper describes the use of ubiquitous joint model for the stability analysis of the jointed rock slopes. This model is essentially an anisotropic elasto-plastic model and can simulate two sets of joint in arbitrary orientations. Validation of the developed with the factor of safety equal to unity was selected when the shape of the failure plane is assumed log spiral. Then the factor of safety of the rock slope having two perpendicular joint sets was calculated while rotating joint orientations. Rusults were compared with limit equilibrium solutions on soil slopes having equivalent soil properties when plane sliding was assumed. Developed model predicted the factor of safety of jointed rock slope in a reasonable accuracy when joint spacing is sufficiently small.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.737-741
• /
• 2012

본 연구에서는 2011년 7월 27일 집중호우로 인한 서울시 우면산 산사태 지역을 대상으로 뿌리의 보강효과와 분포형 습윤지수를 고려한 GIS기반의 무한사면안 해석기법을 이용하여 사면안정해석을 실시하였다. 사면안정해석을 위한 지형 지질학적 매개변수는 수치지도, 정밀토양도 및 임상도(임상도와 영급도)로부터 추출하여 $10m{\times}10m$ 해상도의 공간분 포형 데이터베이스로 변환하였다. 또한, 분포형 습윤지수의 산정을 위한 비집수면적(specific catchment area)은 무한방향흐름 기법(IFD, infinity flow direction)을 이용하여 결정하였으며, 모형의 입력 강우자료는 서울시 서초와 남현 AWS의 산사태 발생초기와 종기시의 평균 일강우량을 적용하였다. 대상유역의 사면안정해석을 위해 격자별 안전률은 4개의 등급(unstable, quasi stable, moderately stable, stable)으로 구분하여 도시하였다. 산사태 발생인자별 분석결과, 무한사면안정해석기법을 이용하여 산정된 사면안전률은 사면경사에 매우 민감하게 반응하는 것으로 분석되었으며, 거주지 주변의 절개지 부근과 산지정상부근의 급경사지에서 불안정 지역이 집중적으로 분포하고 있음을 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.45-58
• /
• 2019

In this study, a stochastic analysis procedure based on numerical analysis was proposed to evaluate a kind of intensity-duration rainfall threshold for the initiation of slope failure due to rainfall infiltration. Fragility curves were generated as a function of rainfall intensity-duration from the results of probabilistic slope stability analysis by MCS considering the uncertainty of the soil shear strength, reflecting the results of infiltration analysis of rainfall over time. In the probabilistic analysis, slope stability analyses combined with the infiltration analysis of rainfall were performed to calculate the limit state function. Using the derived fragility curves, a chart showing the relationship between rainfall intensity and slope failure-time was developed. It is based on a probabilistic analysis considering the uncertainty of the soil properties. The proposed probabilistic failure distribution analysis could be beneficial for analyzing the time-dependent failure process of soil slopes due to rainfall infiltration, and for predicting when the slope failure should occur.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.135-142
• /
• 2001

사면안정해석을 위해 다공체(porous medium) 이론이 제시되었다. 다공체 이론은 간극수압, 토질입자 및 간극수의 상호작용을 포함하는 여러 가지 지반관련 문제의 이해에 있어 매우 중요하다. 이러한 상호작용은 토질강도 및 변형에 중요한 영향을 미친다. 압밀 예제로서 이러한 모델의 정확도를 첫째로 검증하였다. 사면안정해석에 있어서 토질의 응력 및 강도는 일반적인 구성모델을 포함한 비선형 유한요소해석을 사용하여 정확히 계산되었다. 사면안정해석은 한계상태를 표시하는 파괴면이 나타날 때까지 점차적인 중력의 증가로 실행되었다. 안전율은 증가시킨 중력과 실제사면 중력의 비로서 계산되었다. 제시된 사면 안정 해석 방법의 자세한 사항은 예제를 통하여 설명되었다.

• Journal of the Korean Society for Railway
• /
• v.14 no.1
• /
• pp.24-30
• /
• 2011

Conventional slope stability analysis is focused on calculating minimum factor of safety or maximum probability of failure. To minimize inherent uncertainty of soil properties and analytical model and to reflect various analytical models and its failure shape in slope stability analysis, slope stability analysis method considering simultaneous failure probability for multi failure mode was proposed. Linear programming recently introduced in system reliability analysis was used for calculation of simultaneous failure probability. System reliability analysis for various analytical models could be executed by this method. For application analysis for embankment, the results of this method shows that system stability of embankment calculate quantitatively.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.25-34
• /
• 2011

We applied a slope-stability analysis method, considering infiltration by rainfall, to the construction site where an express highway is being extended. Slope stability analysis that considers infiltration by rainfall can be classified into three methods: a method that considers the downward velocity of the wetting front, a method that considers the upward velocity of the groundwater level, and a method that considers both of these factors. The results of slope stability analysis using $Bishop^{\circ}{\Phi}s$ simplified method indicate that the safety factor due to the downward velocity of the wetting front decreases more rapidly than that due to the upward velocity of the groundwater level. For the third of the above methods, the safety factor decreases more rapidly than for the other two methods. Therefore, slope stability during rainfall should be analyzed with consideration of both the downward velocity of the wetting front and the upward velocity of the groundwater level.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.2
• /
• pp.25-35
• /
• 2009

Slope failures are one of the significant disasters which causes lots of human casualties and huge financial losses every year. Previous researches on the slope failure have indicated that most accidents are closely related to the pore water pressure in the slope due to rainfall during the rainy seasons or stormy weather conditions. It would be therefore appropriate to consider the effect of pore water pressure in the design of slopes. As the existing slopes are generally reinforced by plants and other slope protecting measures, their boundary conditions are highly complicated. In this paper an attempt to develop a new modeling and analysis technique of slopes is proposed by including pore water pressure and adopting the coupled finite element method. Non-reinforced and reinforced slope models are considered. Representative analysis showed that the numerical modeling considering pore water pressure is appropriate in slope stability analysis. Flow behavior in the slopes is identified for various hydraulic boundary conditions. It is also shown that the effect of pore water pressure on slope stability is significant.

• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.235-241
• /
• 2004

사면활동은 삼차원적인 토괴 혹은 암괴의 입체적 움직임의 산물이며 여러 가지 복잡한 지질학적 요인에 의하여 발생하고 있다. 하지만 사면안정해석은 일반적으로 이차원적으로 수행됨으로써 해석모델을 극히 단순화시키고 있다.(중략)

• Tunnel and Underground Space
• /
• v.12 no.2
• /
• pp.83-91
• /
• 2002

Stability analysis of rocky embankment slopes is done by both the limit equilibrium method and the finite difference method. The height or the rocky embankment is approximately 40 m and the side slope is 1 vertical to 1.5 horizontal. The cohesion and internal friction angle of rock debris are assumed zero and 43$^{\circ}$, respectively. For finite difference analysis, strength reduction method is used to calculate the saft factor of the slope. As a result, the safety factor of the slope is discovered to be 1.4 by using either methods. Considering that the design criteria of the safety factor is 1.3, it can be judged that the rock fragments embankment slope is in a stable state.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.451-460
• /
• 2004

The strength of sliding plane is usually assigned on the whole sliding plane with same value in 2D limit equilibrium slope stability method. However, the potential sliding plane is divided into two or three parts which have different sliding resistances. According to the calculation results of 3D slope stability analyses using 4 types of slope cutting models, marginal sliding resistance could affect the safety of slope significantly. In this calculation two kinds of the sliding plane strengths were applied differently to the parts of bottom and margin of the model slope. The effect of marginal resistance was calculated quantitatively. In case of lower sliding resistance of the bottom, the safety factor becomes low in a margin cutting model. However, in case of higher sliding resistance of the bottom, the safety factor decreased slightly in a lower part cutting model and increased in a upper margin cutting model.