• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2019

Building Information Modeling (BIM) and modular construction are regarded as important technologies that have contributed to advancements in the construction industry. However, the utilization of BIM in current modular construction projects is limited; moreover, there are no specific guidelines pertaining the applications of BIM in modular construction projects. Therefore, this study aims to analyze the utilization of BIM for onsite construction planning in modular construction projects. First, a realistic BIM application was selected through literature review and expert interviews. Then, the construction plan of the modular projects was analyzed to classify the BIM application items into five different categories. The utilization of BIM in each category was then analyzed in terms of necessity and efficiency using a questionnaire. Finally, the BIM Utilization Index (BIM UI) was suggested based on the findings of the survey. As a results, the BIM UI for module point details, lifting plan, other installation details, site layout plan, and schedule plan was 0.811, 0.787, 0.770, 0.729, and 0.699, in the descending order of usability. In addition, through the findings of the study and interviews with experts, a case study for implementation of BIM in modular construction plan was conducted. The results of this study can be used as application guidelines for BIM in future modular construction projects.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.87-92
• /
• 2019

In this paper, we have verified a low-voltage EM(elasto-magnetic) sensing technique for tensile force management of PSC(prestressed concrete) internal tendon in order to apply the technique to actual construction sites where stable power supply is difficult. From observation of past domestic and overseas PSC structural accident cases, it was found that PS tension is very important to maintain structural stability. In this paper, we have tried to measure the tensile force from a magnetic hysteresis curve through EM sensors according to voltage value by using relation between magnetostriction and stress of ferromagnetic material based on elastic-magnetic theory. For this purpose, EM sensor of double cylindrical coil type was fabricated and tensile force test equipment for PS tendon using hydraulic tensioning device was constructed. The experiment was conducted to confirm relationship between changes of permeability and tensile force from the measurement results of the maximum / minimum voltage amount. The change of magnetic hysteresis curve with magnitude of tensile force was also measured by reducing amount of voltage step by step. As a result, the slope of estimation equation in accordance with magnitude of magnetic field decreases with the voltage reduction. But it was confirmed a similar pattern of change of magnetic permeability for the magnetic hysteresis loop. So, in this study, it is considered that it is possible to manage the tensions of PSC internal tendon using EM sensing technique in low-voltage state.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.235-241
• /
• 2018

In this study, we collected cases of accidents caused by swell in the east coast of Korea from 2013 to 2017. The location of the accident, the season, the type of coast and the type of damage were classified and the correlation between the accident and the wave data was analyzed by collecting the observation data of the nearby area at the time of the accident. Also, based on the results of the coastal disaster vulnerability assessment of Korea Hydrographic and Oceanographic Agency, the vulnerability grades of swell accidents area were evaluated. In swell accident area, the average grade of the wave exposure index was 4.91, the wave sensitivity index was 3.87, and the wave impact index was 4.90. As a result, most of the swell accidents occurred in the 5 grade (very vulnerable level) of the wave impact index, and the area of the east coast (78.7%) of the same 5 grade was classified into five types according to the wave sensitivity index result. Finally, a countermeasures was taken for characteristics of each type.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.8
• /
• pp.287-300
• /
• 2021

Collaborative Cyber-Physical Systems (CCPS) are those systems that contain tightly coupled physical and cyber components, massively interconnected subsystems, and collaborate to achieve a common goal. The safety of a single Cyber-Physical System (CPS) can be achieved by following the safety standards such as ISO 26262 and IEC 61508 or by applying hazard analysis techniques. However, due to the complex, highly interconnected, heterogeneous, and collaborative nature of CCPS, a fault in one CPS's components can trigger many other faults in other collaborating CPSs. Therefore, a safety assurance technique based on fault criticality analysis would require to ensure safety in CCPS. This paper presents a Fault Criticality Matrix (FCM) implemented in our tool called CPSTracer, which contains several data such as identified fault, fault criticality, safety guard, etc. The proposed FCM is based on composite hazard analysis and content-based relationships among the hazard analysis artifacts, and ensures that the safety guard controls the identified faults at design time; thus, we can effectively manage and control the fault at the design phase to ensure the safe development of CPSs. To justify our approach, we introduce a case study on the Platooning system (a collaborative CPS). We perform the criticality analysis of the Platooning system using FCM in our developed tool. After the detailed fault criticality analysis, we investigate the results to check the appropriateness and effectiveness with two research questions. Also, by performing simulation for the Platooning, we showed that the rate of collision of the Platooning system without using FCM was quite high as compared to the rate of collisions of the system after analyzing the fault criticality using FCM.

• Journal of Christian Education in Korea
• /
• v.66
• /
• pp.383-412
• /
• 2021

The purpose of this study is to analyze the journal of reflection of students who participated in the character improvement education program. And it is a study that suggests ways to develop the program according to the results of analysis. Then, by collecting 208 reflective journals of students who participated in Milal training at K University, After the analysis was performed in the process of transcription, coding, and subject discovery, reliability was secured by calculating the Kappa coefficient for the analysis frame and analysis suitability. According to the results of the analysis of reflection journal. Through Milal training, the Milal spirit was understood as sacrificial service (sacrifice, devotion, lowering, serving, death, decay) and Milal (reproduction). We confirmed that It will have a life attitude related to the themes of labor (hardwork, work, patience, patience, perseverance). It can be said that through Milal training, self-reflection activities can be promoted, community character and collaboration skills can be cultivated, and the spirit of sacrificial service can be acquired. Through the results of this reflection journal analysis, it is necessary to further enhance the Milal training program, and it will be possible to provide implications to the character cultivation programs of other universities.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.71-78
• /
• 2021

Since most functions of modern aircraft are controlled by software, software errors are directly related to aircraft safety. The criterion in Chapter 15 of the MIL-HDBK-516C addresses safe development and verification of military aircraft software. As the U.S. Air Force repeatedly experienced non-compliance with Chapter 15 criterion of the MIL-HDBK-516C, it published an Airworthiness Circular (AC-17-01) as a guide to meeting the criterion. In this paper, Chapter 15 of MIL-HDBK-516C, AC-17-01 and the SW Qualification Guideline (DO-178C) as applied by the Federal Aviation Administration are compared and analyzed. For the analysis, a matching ratio formula between the MIL-HDBK-516C criteria specified in AC-17-01 and the DO-178C specified in MIL-HDBK-516C criteria is defined. The sections that satisfy MIL-HDBK-516C criterion are derived when AC-17-01 or DO-178C matches. Based on the analysis results, the aircraft software development process is established and examples of application of Chapter 15 of MIL-HDBK-516C are addressed.

• Korean Journal of Optics and Photonics
• /
• v.32 no.5
• /
• pp.235-243
• /
• 2021

Photobiomodulation (PBM)-based therapy, which uses a phenomenon in which a light source of a specific wavelength band promotes ATP production in mitochondria, has attracted much attention in the fields of biology and medicine because of its effects on wound healing, inflammation reduction, and pain relief. Research on PBM-based therapy has mainly used lasers and light-emitting diodes (LEDs) as light sources and, despite the advantages of organic light-emitting diodes (OLEDs), there have been only a few cases where OLEDs were used in PBM-based therapy. In this research, the skin-care effect of PBM was analyzed using red (λ = 620 nm), green (λ = 525 nm), and blue (λ = 455 nm) OLED lighting modules, and was compared to the PBM effect of LEDs. We demonstrated the PBM-based skin-care effect of the red, green, blue OLED lighting modules by measuring the increase in the amount of collagen type-1 synthesis, the inhibition of melanin synthesis, and the suppression of nitric oxide generation, respectively.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.3
• /
• pp.258-273
• /
• 2019

Bilbao, Spain, made a mark as a example of the regional revitalization by culture and tourism. Korean Government have a perspective that culture and tourism could be an alternative to the regional crisis of manufacturing in 2018. The main purpose of this study is to analyze the locational specificity and the revival strategies for the regional development of Bilbao in a structural context. This could provide implications to the regional crisis of Korea. The main results are summarized as follows. Firstly, the local government of Bilbao has taken an active role, using not only its political and financial autonomy but also its locational advantage as an important nodal region of transnational trade networks in Europe. Secondly, Bilbao was able to sustain its regional revitalization initiatives for a long period by facilitating public-private partnership system. Finally, despite the effectiveness of the mega project and place marketing, low job security and the polarization of the service sector have emerged as a problem at the same time. Still, the deindustrialization of Bilbao could be possible due to the various services including knowledge-based services and financial services as well as culture and tourism.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.11
• /
• pp.11-22
• /
• 2019

Limit state design (LSD) and allowable stress design (ASD) are two main types of soil nailing design methodologies. In the LSD method, stability is determined by applying individual coefficients to ground strength, working load and etc. The ASD method calculates the safety factor and compares it with the minimum safety factor to determine the stability. The global design trend of soil nailing system is changing from the ASD method to the LSD method. The design method in Korea still adopts the ASD philosophy while others mostly do the limit state design. In this study, four soil nail design methods, 'FHWA GEC 7' in U.S. (2015), 'Clouterre' in France (1991), 'Soil nailing - best practice guidance' in U.K. (2005), 'Geoguide 7' in Hongkong (2008), and 'Design guide for slope in construction work' in Korea (2016) were applied to the evaluation of the stability and the results were analyzed comparatively in brief. It is revealed that the design method of 'the overall stability of soil nail walls' in Korea is the most conservative and next those by FHWA, Clouterre and CIRIA become more conservative in order. However, the difference of results obtained from FHWA and Clouterre is negligible. Also, this study found out that efforts to improve domestic design criterion are needed.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.387-402
• /
• 2020

Conventional automotive development has mainly focused on ensuring correctness and safety and security has been relatively neglected. However, as the number of automotive hacking cases has increased due to the increased Internet connectivity of automobiles, international organizations such as the United Nations Economic Commission for Europe(UNECE) are preparing cybersecurity regulations to ensure security for automotive development. As with other IT products, automotive cybersecurity regulation also emphasize the concept of "Security by Design", which considers security from the beginning of development. In particular, since automotive development has a long lifecycle and complex supply chain, it is very difficult to change the architecture after development, and thus Security by Design is much more important than existing IT products. The problem, however, is that no specific methodology for Security by Design has been proposed on automotive development process. This paper, therefore, proposes a specific methodology for Security by Design on Automotive development. Through this methodology, automotive manufacturers can simultaneously consider aspects of functional safety, and security in automotive development process, and will also be able to respond to the upcoming certification of UNECE automotive cybersecurity regulations.