• Defense and Technology
• /
• 6호통권160호
• /
• pp.54-57
• /
• 1992

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 1997년도 제9회 학술강연회논문집
• /
• pp.18-18
• /
• 1997

미국, 스웨덴, 이스라엘을 비롯 일부 국가에서는 재래식 155mm 곡사포탄에 항력감소장치(일종의 가스발생기)를 부착하여 탄의 비행 중에 형성되는 탄저부 항력(Base Drag)을 감소시켜 사거리를 연장한 무기체계가 실용화되어 있다. 국과연은 155mm HE탄에 적용되는 항력감소장치를 개발하여 약 35% 정도 사거리를 연장한 것으로 보고되고 있다. 당사는 '96년 11월 미제 155mm M864(DPICM)와 동등한 성능을 갖는 항력감소장치 개발에 착수, 발사시험을 통해 미제 M864와 동등한 성능의 항력감소제를 개발하였다. 본 논문에서는 항력감소장치의 사거리 연장 원리와 본 항력감소제 개발내용 및 시험결과를 기술하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 1999년도 제12회 학술강연회논문집
• /
• pp.19-19
• /
• 1999

155mm 탄에 항력감소장치(Base Bleed Unit)를 부착하여 탄의 비행중에 형성되는 탄저부의 항력(Base Drag)을 감소시켜 사거리를 연장하는 무기체계가 미국을 비롯한 많은 국가에서 실용화되고 있다. 국내에서는 국과연 주관사업으로 이미 신형자주포에 적용되는 155mm 탄의 항력감소장치를 개발, 사거리 약 35%를 증가하여 실용화 단계에 있다. 또한 최근에는 미제 M864급인 155mm 성능개량 DPICM(Dual purpose Improved Conventional Munition)탄과 동등 성능을 갖는 탄의 개발이 요구되어, 이의 항력감소제인 저연소속도 추진제를 개발하여 155mm DPICM탄에 적용한 결과 약 20%의 사거리가 증가된 미제와 동등한 성능의 항력감소제를 개발하여, 이를 보고한바 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 1998년도 제11회 학술강연회논문집
• /
• pp.22-22
• /
• 1998

155mm 탄에 항력감소장치를 부착하여 탄의 비행중에 형성되는 탄저부의 항력(Base drag)을 감소시켜 사거리를 연장한 무기체계가 미국 등을 비롯한 많은 국가에서 실용화되고 있다. 국과연은 이미 155mm 신형 자주포탄에 적용되는 항력감소장치(항력감소제 그레인, Base & Closure, 점화장치)는 개발하여 사거리를 연장(약 35%)한 것으로 보고하고 있다. 본 연구는 추후 실용화가 예상되는 155mm 성능개량형 DPICM탄(미제 M864급)에 적용할 수 있는 항격감소제용 저연소속도 혼합형 추진제 개발을 목표로 하여, 이에 동등한 추진제 특성(기계적성질, 연소특성, 접착력, 발열량 등)을 가지는 추진제, 라이너(Inhibitor)의 조성개발을 실시하였다. 그리고 개발된 혼합형 추진제 조성의 성능(사거리 및 분산도)을 확인하기 위하여 항력감소제용 그레인을 제작, 155mm 성능개량형 DPICM탄에 적용하여 발사시험을 실시하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제38권11호
• /
• pp.1081-1086
• /
• 2010

The technical procedure of an enhancement of a 120 mm rocket assisted projectile has here addressed by analyzing the ballistic performance with several the solid rocket propellants and shell designs. The performance was evaluated by aero-ballistic analyses and static ground tests of the rocket motor. Consequently, firing tests showed that one of tested models gave about 70% of extended range compared with conventional projectiles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.173-176
• /
• 2009

The mortar system is useful for infantry because of effectiveness to position operation and to attack at opposite slope that can not reached by direct-firing guns and howitzers. The Army continuously has researched on 120mm mortar system, and insist needs for 120mm mortar system with advanced accuracy, mobility and range. In this study, we had designed the formulation of solid rocket propellants applied on 120mm rocket assisted projectile, and fabricated a prototype, and investigated feasibility of rocket assisted projectile for 120mm mortar results from static firing and flight test.

• KIPS Transactions on Computer and Communication Systems
• /
• 제4권11호
• /
• pp.361-368
• /
• 2015

In AAGFCS the effective range is regarded as a range for the bullet's speed exceeding the speed of sound to damage the stationary target. Hence the real engagement range might be extended over the effective range for the approaching target since bullet's relative speed to the target increases depending on the approaching speed. However previous TOF equations have good computation accuracy within the effective range only, and they can not be used above that range due to their bad accuracy. We propose an accurate TOF computation method which can be used both within and above the effective range in real time. Some simulation results are shown to demonstrate usefulness of our algorithm for the 30mm projectile.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제19권4호
• /
• pp.52-60
• /
• 2015

Operation area of corps was expanded under military reformation, and extending range of 155 mm howitzer became important issue. New approach is needed to extend range to 80 kim. Ramjet engine is air breathing engine, and it can provide specific impulse several times more than solid rocket motor so that range is extended using same weight of propellant. If the ramjet engine is gun-launched system, it does not require any other booster because muzzle velocity is near Mach 3. Especially solid fuel ramjet (SFRJ) does not have any moving part so that it is favorable for gun-launching system which is under high stress during launching. In this paper, we design air intake, combustion chamber, and nozzle of 155 mm gun launched ramjet propelled artillery shell with inviscid flow assumption. We conduct parameter study to have range more than 80 km, and maximum high explosive volume.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.664-667
• /
• 2010

Solid rocket propulsion systems are generally used for tactical missiles due to the structural and operational simplicity. Nevertheless, various kinds of design factors including outer diameter, length, weight, loading efficiency of propellant grain effects to thrust performance. Dual thrust is beneficial to range extension and terminal velocity increasement. But loading efficiency becomes low in case to obtain dual thrust performance by burning surface control. So, It is predicted to be reasonable to obtain dual thrust performance with high/low burning rate propellants. This study is on internal ballistic analysis and ground test to confirm dual thrust performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.479-483
• /
• 2005

BBU is the weapon system for the extension of range through the reduction of base drag in 155mm. It has been mass-produced since 2000. The purpose of this research is productivity increase through the reduction of process lead time. Development process is as follows. First, formulation tests about propellent and liner, Second, spin test and final firing test about end products.