• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.740-747
• /
• 2012

An Active Electronically Scanned Array(AESA) radar required necessarily as the Fire Control Radar(FCR) of recent fighters has ununiform detection range with regard to scan angle due to scan loss. Although the compensation method of scan loss in an AESA radar with variable dwell time is investigated, the effectiveness of the method in a fighter FCR with multi-function such as search, track, and missile guidance within limited resources should be considered systematically. In this paper, uniform search performance of an AESA radar using variable dwell time with regard to scan angle is derived. We assumed the search load of 50 % for case without changing dwell time in fixed frame time and showed the fighter FCR requirement for multi-function is not satisfied because the search load for the uniform search performance should be increased by about 100 %. On the other hand, in case of increasing the frame time for the uniform search performance and search load of 50 %, degradation of the search performance is shown by 86.7 % compared with the former. Based on these analyses, the effective beam operation strategy on an airborne AESA radar with uniform search performance in whole scan area is described with consideration of frame time, search load and performance as a whole.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.149-152
• /
• 2004

본 연구에서는 Split-beam 변환기에 적용 가능한 방향 탐지 알고리듬으로써 4분 샘플링에 의한 시간 영역에서의 음원 도래 방향 탐지법을 검토하고자 한다. 외부 잡음을 고려한 환경하에서도 완전 샘플링 및 4분 샘플링 후 주파수 영역에서의 시간 지연 계산법보다 4분 샘플링에 의한 시간 영역에서의 상호상관 기법이 경제적인 측면과 분해능의 측면에서 적절하다는 것을 확인하였다.

• Korean Journal of Optics and Photonics
• /
• v.25 no.4
• /
• pp.200-206
• /
• 2014

In this paper, using the value theoretically calculated to emit multidirectionally a beam coming into an optical fiber with diameter of $125{\mu}m$, we modeled and produced a cone-shaped structure at the distal end of the fiber. A numerical simulation was performed for an optical fiber tip in which all incident beams were totally reflected and emitted toward the side, as well as for an optical fiber tip from which the beams could be emitted forward and sideways simultaneously. We produced multidirectional-firing optical fiber tips based on the simulation result and model. Laser fabrication of the optical fiber was done by processing a cone-shaped structure at the distal end of an optical fiber with diameter of $125{\mu}m$ using a femtosecond pulsed laser and polishing the processed surface with a $CO_2$ laser. We also conducted an analysis to compare experimental and simulation results.

• Journal of Radiation Protection and Research
• /
• v.36 no.3
• /
• pp.168-173
• /
• 2011

This study investigated characteristics of dose distribution at junction field of X-ray and electron beams according to the method for fabricating the insert block on the electron cone. Insert block were fabricated to the divergency cutout block and the straight cutout block. For the 6 MV X-ray and 10 MeV nominal energy of electron beam, we was adjacent to the light field of X-ray and electron beam at a surface of matrix chamber and measured to beam profile of abutted field in the 0, 1, 2, 3 cm measurement depth. As a result, characteristics of dose distribution at junction field, straight block was existent that over dose area exceed the give dose more than 5% and under dose area with a rapid change in dose distribution. However, divergency block had remarkably decreased the over dose area caused by the lateral scattering effects of decrease, and being existed uniformity dose distribution in the junction field. Therefore, divergency block were the benefits of radiation dose delivery, in order to applied the clinical, measurement of electron beams according to the fabrication method of the block should be considered carefully.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.447-450
• /
• 2000

In this paper, we report a fabrication of InP-based microstructurs for III-V compound semiconductor micromachining. Vertical liquid phase epitaxy(LPE) system was used in order to grow the Inp/InGaAsP/InP layers. The thicknesses of InP top-layer and InGaAsP were 1$\mu\textrm{m}$ and 0.4$\mu\textrm{m}$ respectively. The fabrication of InGaAsP microstructures involves front side bulk micromachining. The experimental result showed the beams must be carefully aligned in the <110> direction since the lateral etching of the beam in the <110> direction is more faster than that of the beam in the <100> direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.974-983
• /
• 2007

In this paper, a low complexity subcarrier allocation scheme is proposed for multiuser MIMO-OFDM systems with zero-forcing beamformer (ZFBF) so that the total transmit power can be minimized satisfying given target data rate. Since the optimal method requires very high computational complexity, we propose a low complextiy suboptimal method. Using the fact that the effective channel gain is proportional to the orthogonallity of channels of multiplexed users, a user set with the highest orthogonality of channel among users is assigned to each subcarrier in order to minimize required transmit power. The numerical results show that the proposed suboptimal method can reduce computational complexity with little performance loss.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2013

Car cross beam made by aluminium for new car is designed for the substitution of steel and it can be verified the performance by computer simulations. The parts of car cross beam are designed to replace steel parts according to their manufacturing processes. At the first stage, the weight of the aluminium car cross beam can be reduced to 75% by comparing with that of steel car cross beam. But NVH performance of the aluminium car cross beam becomes slightly insufficient as compared with that of steel car cross beam. Taguchi method is adopted to optimize the design variables affecting NVH characteristics of car cross beam. New car cross beam is designed at the second stage by using these analysis results. Weight reduction can be obtained to 31.7% by design modification and material change of car cross beam in comparison with the original steel one. NVH characteristics of aluminium car cross beam become on an equal level with the steel car cross beam. By side impact analysis results, new car cross beam has higher performance as compared with the steel car cross beam.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.18-23
• /
• 1996

Fluctuation statistics of scattering strength are not only important because they impact the performance of active sonar systems, but also because they may provide insight into the major scattering process. In this article, analysis of the statistical characteristics of bottom backscattering, measured in shallow water, are presented. The slowly moving experimental sonar was operated at 30kHz to gather data over the bottom. Spatial and temporal correlation functions of the signal amplitudes were measured. The distribution function and probability of false alarm function of the detected envelope of widebeam and narrowbeam signals were measured. An attempt was made to compare the results with existing theoretical models. The result suggests that the statistical characteristics of bottom backscattering fluctuation of moving source is differ from that of fixed source.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.244-244
• /
• 2010

최근 활발히 연구되고 있는 AMOLED는 평판 디스플레이 분야를 이끌어 갈 차세대 선두 주자로 크게 주목 받고 있다. AMOLED는 전압 구동 방식인 AMLCD와 다르게 전류 구동 방식으로 a-Si TFT 보다 LTPS-TFT 사용이 요구되며, 대면적 기판으로 갈수록 결정립의 균일도가 매우 중요한 인자로 작용한다. 현재 양산이 가능한 AMOLED는 핸드폰이나 15인치 TV정도로 크기가 소형이며 대형 TV나 컴퓨터 모니터 등을 양산하기 위해 많은 방법이 시도되고 있다. 양산체제에서 사용되는 결정화 방법으로는 ELC가 가장 많은 부분을 차지하고 있다. 그러나 레이저를 사용하는 ELC 방법은 대면적으로 갈수록 레이저 빔 자체의 불균일성, shot to shot 불균일성, 레이저빔 중첩의 부정확도 등으로 인한 균일도의 부정확성이 커짐으로 인한 mura 현상이 나타나고 레이저 장비의 사용에 대한 비용 부담을 피할 수 없다. 따라서 non-laser 방식에 결정화 방법이 요구되나 SPC 경우는 상대적으로 고온에서 장시간이 걸리고, MIC 뿐만 아니라 MIC 응용 방법들은 금속 오염에 대한 문제가 발생하고 있는 실정이다. 이러한 문제로 인하여 결정립 크기의 균일도가 우수한 다결정 실리콘 박막을 제조하는 신기술에 대한 필요성이 매우 높은 실정이다. 본 연구에서는 비정질 실리콘 박막 상부 혹은 하부에 도전층을 개재하고, 상기 도전층에 전계를 인가하여 그것의 주울 가열에 의해 발생한 고열로 비정질 실리콘 박막을 급속 고온 고상 결정화하는 방법에 관한 기술인 JIC (Joule-heating Induced Crystallization) 결정화 공정을 개발하였다. 본 공정은 상온에서 수 micro-second 내에 결정화를 수행하는 것이 가능하며 도전층과 실리콘 박막 사이에 barrier층 삽입를 통하여 금속 오염을 막을 수 있으며 공정적인 측면에서도 별도의 chamber가 필요하지 않는 장점을 가지고 있다. 본 논문에서는 JIC 결정화 공정 조건에 따른 결정화 기구 및 JIC poly-Si의 미세구조 및 물리적 특성에 관한 논의가 이루어질 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.366-373
• /
• 2007

In this paper we propose a multi-channel speech pickup system for calling quality enhancement of hands-free communication using ALTERA Nios-II processor. Multi-channel speech pickup system uses Delay-and-Sum beamformer with zero-padding interpolator. This paper implements speech pickup system using the Nios-II processor with real-time I/O data processing speed. The proposes speech pickup embedded system shows a good agreement with those of computer simulation(MATLAB) and conventional DSP processor(TMS320C6711) result. The proposed method is effective more than previous methods in cost and design processing time. As a result, LE(Logic Element) of hardware used 3,649/5,980(61%) on a chip.