• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.130-138
• /
• 2008

In this paper, we propose a user selection method to maximize the sum-rate of downlink over opportunistic beamforming. The throughput of an opportunistic beamforming with non-uniformly distributed or a small number of users can decrease. In order to improve the throughput, we propose a scheduling method that does not use SINR or SNR but uses the effective channel gain of each user obtained from the SINR or SNR feedback. The proposed method makes it possible to select users flexibly according to the distribution of users. In numerical results, we show that the proposed methods improve the average sum-rate about 60% when users are distributed non uniformly.

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.112-112
• /
• 1998

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.361-367
• /
• 2024

Ultrasound in the air is widely used in industry as a measurement technique to prevent abnormalities in the machinery. Recently, the use of airborne ultrasound imaging techniques, which can find the location of abnormalities using an array transducers, is increasing. A beamforming method that uses the phase difference for each sensor is used to visualize the location of the ultrasonic sound source. We exploit a random sparse ultrasonic array and obtain beamforming power distribution on the source in a certain distance away from the array. Conventional beamforming methods inevitably have limited spatial resolution depending on the number of sensors used and the aperture size. A high-resolution ultrasound imaging technique was implemented by applying functional beamforming as a method to overcome the geometric constraints of the array. The functional beamforming method can be expressed as a generalized beam forming method mathematically, and has the advantage of being able to obtain high-resolution imaging by reducing main-lobe width and side lobes. As a result of observation through computer simulation, it was verified that the resolution of the ultrasonic source in the air was successfully increased by functional beamforming using the ultrasonic sparse array.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.70-71
• /
• 2000

세슘빔 공진기에서 세슘D$_2$ 전이선으로 광펌핑된 원자가 램지공진기에서 마이크로파의 주파수에 따른 초미세준위의 바닥상태간의 원자밀도 전이에 의한 형광 신호의 분포를 펌핑광의 세기에 따라 관측하였다. 펌핑광의 편광방향이 자기장에 나란한 $\pi$편광일 때 각 제만부준위의 마이크로파 전이 신호는 mF=0을 중심으로 $\pm$mF의 신호세기가 대칭적이었으나 펌핑광의 편광 방향이 자기장에 수직인 $\sigma$ $\pm$ 인 경우에는 비대칭적임을 확인하였다. 이것은 펌핑광의 주파수가 세슘빔 공진기에서의 세슘공진주파수에서 detuning이 있는 것에 의한 것으로 예상하였다. 이를 확인하기 위해 원자밀도행렬방정식으로 세슘빔공진기에서 마이크로파 전이신호를 계산하였다. 펌핑광의 세기와 편광방향, detuning에 따른 마이크로파 전이신호의 분포가 실험치와 잘 일치함을 알 수 있었다. 이 연구는 세슘빔 원자공진기에서 펌핑광의 주파수가 세슘공진주파수에 detuning된 정도를 관측할 수 있는 방법을 제시해 준다. (중략)

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2004

Read out signal and temperature distribution of magnetic amplifying magnetooptical disk were studied. Temperature distribution of recording layer and adjacent layers were calculated when the disk was at rest. Mark size, length and location were simulated from a chain of recording beam pulses. In addition, signal amplitude depending on the shape of the marks, readout signals from the recording layer and amplified marks of the readout layer, were simulated. Simplified thermal conduction model was used to calculate the temperature distribution of recording and adjacent layers as a function of time as well as to calculate the mark size, length and location. Readout signal was calculated by the convolution of the disk reflectivity and the Gaussian beam intensity. Readout signal from the mark in the readout layer amplified to the size of the laser beam fumed out to be twice as large as the signal from the crescent shaped mark in the recording layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1993.02a
• /
• pp.130-131
• /
• 1993

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.64-69
• /
• 2003

Using a high fewer electron beam gun (max. power 20 kW), Gadolinium (Gd, atomic number 64) metal was melted and the temperature distribution of melted surface was measured. With proper optical filters and the adjustment of aperture of lens, the radiation of melted surface was received by a ccd camera and its signal transferred to a computer. The real time monitoring of melted surface with a variation of electron beam Power was Possible and stable operation of electron beam was achieved. It was found that the max. temperature measured by a ccd camera with an assumption of blackbody radiation of melted Gd surface and adaption of Planet's law was above 100~$200^{\circ}C$ compared to that measured by a pyrometer in the same e-beam power.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.94-96
• /
• 2005

포항방사광가속기의 전자빔수명을 연장하기 위한 3차 하모닉 초전도 RF 공동기를 개발하고 있다. 저장링 빔물리 계산에 따르면 3차 하모닉 초전도 RF 공동기를 설치할 경우 점자빔의 수명이 약2.3배 증가하는 것으로 나타났다. 또 이 공동기를 설치할 경우 란다우 (Landau) 감쇄 (damping)에 의한 빔의 안정화도 개선되는 효과가 있다. 본 논문은 이것을 실현하기 위한 초전도 RF 공동기의 전자기장 분포와 고차원 전자장 계산을 통하여 최적의 공동기의 모양 결정과 설계 특성에 대한 것을 보고 하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.147-156
• /
• 1996

In this paper we proposed a beam steering equation for the planar slotted waveguide array antenna. The tilt angle measured from the rotating axis and the aperture distribution of the antenna were the most important factors for the beam steering. From the equation, we calculated the frequency and phase distribution of the aperture for any desired beam direction. And we developed a high speed control algorithm delivering the phase data to the phase shifters of a one-dimensional phased array antenna. To reduce complexity of the control circuit and the phase delivery time, we proposed the serial phase repeating method. Because of its simplicity, we expect it can be useful for a large 2- dimensional fully phased array antenna.