DOI QR코드

DOI QR Code

Functional beamforming for high-resolution ultrasound imaging in the air with random sparse array transducer

고해상도 공기중 초음파 영상을 위한 기능성 빔형성법 적용

  • Choon-Su Park (Non-destructive Metrology Group, Division of Physical Metrology, Korea Research Institute of Standards and Science)
  • 박춘수 (한국표준과학연구원 물리측정본부 비파괴측정그룹)
  • Received : 2024.03.28
  • Accepted : 2024.04.29
  • Published : 2024.05.31

Abstract

Ultrasound in the air is widely used in industry as a measurement technique to prevent abnormalities in the machinery. Recently, the use of airborne ultrasound imaging techniques, which can find the location of abnormalities using an array transducers, is increasing. A beamforming method that uses the phase difference for each sensor is used to visualize the location of the ultrasonic sound source. We exploit a random sparse ultrasonic array and obtain beamforming power distribution on the source in a certain distance away from the array. Conventional beamforming methods inevitably have limited spatial resolution depending on the number of sensors used and the aperture size. A high-resolution ultrasound imaging technique was implemented by applying functional beamforming as a method to overcome the geometric constraints of the array. The functional beamforming method can be expressed as a generalized beam forming method mathematically, and has the advantage of being able to obtain high-resolution imaging by reducing main-lobe width and side lobes. As a result of observation through computer simulation, it was verified that the resolution of the ultrasonic source in the air was successfully increased by functional beamforming using the ultrasonic sparse array.

공기중 초음파 측정은 각종 기계 설비류의 이상 발생 예방 활동으로 산업계에서 사용되고 있다. 최근에는 다수의 초음파 센서 배열을 이용하여 설비의 이상 발생 위치를 찾을 수 있는 공기중 초음파 영상화 기법의 활용이 증가하고 있다. 초음파 음원의 위치를 가시화하기 위해 센서 별 위상 차이를 이용하는 빔형성법이 사용된다. 2차원 평면에 분포된 초음파 센서 배열을 이용해 3차원 공간에서 빔형성 파워 분포를 구할 수 있다. 본 논문에서는 관심 파장보다 크기가 큰 초음파 센서로 구성된 랜덤 희소배열(random sparse array)을 사용하고, 초음파 배열이 분포한 평면으로부터 일정한 거리만큼 떨어진 평행한 평면 내에서의 빔형성 파워 분포를 통해서 음원의 위치를 보여주는 영상화 기법을 구현하고자 한다. 기존의 빔형성법은 사용 하는 배열 센서의 개수와 그에 따른 구경의 크기 등에 의해 공간 해상도가 제한될 수 밖에 없다. 본 연구에서는 배열이 가지는 기하학적 제약을 극복할 수 있는 방법으로 기능성 빔형성법을 적용하여 고해상도 초음파 영상화 기법을 구현하였다. 기능성 빔형성법은 수학적으로 일반화된 형태의 빔형성법으로 표현가능하고, 기존의 빔형성법을 통해 얻어진 영상에서 주엽의 폭과 부엽의 크기를 저감시키는 역할을 하여 고해상도 영상화를 얻을 수 있는 장점이 있다. 컴퓨터 시뮬레이션을 통해 제안한 방법에 의한 영상화 성능을 관찰한 결과, 초음파 희소배열을 이용하여 공기중 초음파 음원의 해상도 증대가 성공적으로 구현됨을 확인할 수 있었다.

Keywords

Acknowledgement

본 논문은 한국표준과학연구원의 기본사업과제인 "인프라 구조안전 모니터링 기술개발(KRISS-24011216)"과 과기부 연구개발특구 역량강화사업 중 "빅데이터 기반 에너지 수송 매설배관 스마트 감시시스템 개발(2023-DDRD-0153)"의 연구 결과 중 일부이며 지원에 감사드립니다.

References

  1. J. Billingsley and R. Kinns, "The acoustic telescope," J. Sound Vib. 48, 485-510 (1976).
  2. R. Merino-Martinez, P. Sijtsma, M. Snellen, T. Ahlefeldt, J. Antoni, C. J. Bahr, D. Blacodon, D. Ernst, A. Finez, S. Funke, T. F. Geyer, S. Haxter, G. Herold, X. Huang, W. M. Humphreys, Q. Leclere, A. Malgoezar, U. Michel, T. Padois, A. Pereira, C. Picard, E. Sarradj, H. siller, D. G. Simons, and C. Spehr, "A review of acoustic imaging methods using phased microphone arrays," CEAS Aero. J. 10, 197-230 (2019).
  3. B. Diarra, H. Liebogtt, P. Tortoli, and C. Cachard, "Sparse array techniques for 2D array ultrasound imaging," Proc. Acoustics 2012, 1591-1596 (2012).
  4. X. Li, A. Gachagna, and P. Murray, "Design of 2D sparse array transducers for anomaly detection in medical phantoms," Sensors, 20, 5370 (2020).
  5. M. Bjelic, M. Stanojevic, D. Sumarac Pavlovic, and M. Mijic, "Microphone array geometry optimization for traffic noise analysis," J. Acoust. Soc. Am. 141, 3101 (2017).
  6. Y.-H. Kim, Y. Kim, and C.-S. Park, "2-D sparse random ultrasonic array design by genetic algorithm and C-scan imaging in the air" (in Korean), J. Kr. Soc. Non-dest. Testing, 41, 191-200 (2021).
  7. M. T. Ma, Theory and Application of Antenna Arrays (John Wiley & Sons, New York, 1974), Chap. 1.
  8. R. O. Schmidt, "Multiple emitter location and signal parameter estimation," IEEE Trans. Antenna Prop. 34, 276-280 (1986).
  9. S. U. Pillai and B. H. Kwon, "GEESE (Generalized eigenvalues utilizing signal subspace eigenvectors)- A new technique for direction finding," Proc. of 22nd Asilomar Conf. Signal, Syst. Computers, Pacific Grove, 568-572 (1998).
  10. R. Roy and T. Kailath, "ESPRIT-estimation of signal parameters via rotational invariance techniques," IEEE Trans. Acoust. Speech, Signal Proces. 37, 984-995 (1989).
  11. U. J. Schwarz, "Mathematical-statistical description of the iterative beam removing technique (method CLEAN)," Astrono. Astrophysics, 65, 345-356 (1978).
  12. T. F. Brooks and W. M. Humphreys, "A deconvolution approach for the mapping of acoustic sources (DAMAS) determined from phased microphone arrays," J. Sound Vib. 294, 856-879 (2006).
  13. J. Bardsley, J. Merikoski, and R. Vio, "The stabilizing properties of nonnegativity constraints in least-squares image reconstruction," Int. J. Pure Applied Math. 43, 95-109 (2008).
  14. R. P. Dougherty, "Functional Beamforming," Proc. of 7th Berlin Beamf. Conf. 1-25 (2014).
  15. G. Allevato, J. Hinrichs, M. Rutsch, J. Adler, A. Jager, M. Pesavento, and M. Kupnik, "Real-time 3D imaging using an air-coupled ultrasonic phased array," IEEE Trans. Ultra- sonics, Ferroelect. Freq. Control, 68, 796-806 (2021).