• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.200-213
• /
• 2004

The realization of partially coherent Gaussian Schell-model beams with isotropic cross section and anisotropic degree of coherence function is investigated theoretically. An optical system is devised to transform diffused light generated by passing the Gaussian beam of the He-Ne laser thorough a rotating holographic diffuser to the partially coherent Gaussian Schell-model beam with isotropic cross section and anisotropic degree of coherence function. Analytic design equations are formulated and design examples are presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.286-286
• /
• 2011

현재의 NEDO (New Energy and industrial technology Development Organization) style Si 정련은 두 단계로 구분되어 있다. 고출력 집속 전자빔을 이용한 금속 실리콘의 1차 용융과 대기압 근처의 플라즈마 아크 용해를 이용해서 B, P를 약간의 반응성 가스를 첨가 하여 제거하는 방법이다. 그러나 저가형 실리콘을 생산하려는 취지와 달리 두 가지의 고가 장비가 필요하다. E-beam melting 장치에서도 반응성이 높은 라디칼을 생성할 수 있다면 하나의 장비에서 두 가지의 정련 작업을 진행시킬 수 있다. 본 연구에서는 고진공에서(< 10-4 Torr) 동작하는 E-beam의 성능에 전혀 영향을 주지 않으면서 플라즈마를 용이하게 생성 시킬 수 있는 방법을 개발하고 이를 적용하여 실제 금속 순도 실리콘 내에 존재하는 B, P가 제거되는지 확인하는 것을 연구 내용으로 한다. 본 연구는 MG (Metal Grade) - Si 을 플라즈마 보조 전자빔 정련을 이용하여 정련한 Si 의 불순물 함량의 개선 효과를 조사하는 것이다. MG-Si 의 정련 방법 중에서 고출력 집속 전자빔을 이용하여 휘발성 오염물질을 제거 후, 플라즈마 아크 용해를 이용해서 B 를 제거하는 방법을 접목시켰다. MG-Si 에 DC power 와 전자빔을 집속시켜서 정련을 하면 챔버 내의 잔류 수증기가 플라즈마에 의해 분해되어 O를 생성하고, B와 반응을 하여 BO 형태로 제거가 된다. 방전 전압 700 V 와 전자빔 가속 전압이 4.5 kV, 방출 전류는 11 A, 진공 챔버 내의 압력은 $7.2{\times}10^{-4}$ Torr에서 정련을 진행하여 B를 제거했다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.52-57
• /
• 2001

The passive ranging estimation techniques using a focused beamformer have been studied under the water. It is well known that the passive ranging estimation method using a focused beamformer is excellently evaluated. Among these, the passive ranging sonar is known to have a good performance under low signal-to-noise. ratio. However, its performance is degraded in multi-source environments. In this paper, we proposed the technique using dual focused beamformers to estimate the range. And when the sampling frequency is low, it is very difficult to steer the focused beam to the desired direction, as a result of this, the low performance occurs because of a distorted beam pattern. In this paper, we study the effect of sampling rate on passive ranging by using focused beamformer. And we verified the performance of the proposed method via computer simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.332-339
• /
• 2012

Beamspace transform algorithm transforms spatial-domain data - such as x, y, z dimension - into incidence-angle-domain data, which is called beamspace-domain data. The beamspace transform method is generally used in source localization and tracking, and adaptive beamforming problem. When the beamspace transform method is used in multichannel audio source separation, the inverse beamspace transform is also important because the source image have to be reconstructed. This paper studies the beamspace transform and inverse transform algorithms for multichannel audio source separation system, especially for the beamspace-domain multichannel NMF algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.286-295
• /
• 2008

In this paper, we consider the use of orthogonal multiple beams (OMBs) to simultaneously achieve multi-user diversity and multiplexing gain in a packet-based wireless system. Previous OMB scheme considers the use of a fixed number of multiple beams equal to the number of transmit antennas. However, unless the number of active users is sufficiently large, the use of a fixed number of multiple beams may not provide desired performance due to the interference signal transmitted through other beams, being even worse than the use of a single beam. To alleviate this problem, we consider the adjustment of the number of beams in use to maximize the spectral efficiency according to the operating condition. Simulation results show the validity of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1133-1139
• /
• 2012

In this paper, hybrid mode beamforming (HMB) which allows simultaneous transmission of joint beamforming and disjoint beamforming is proposed. HMB is proven to be asymptotically optimal beamforming for sum rate growth. Extensive simulations show that HMB achieves nearly the same performance as joint encoding (JE) in symmetric interference channel. It is also shown that it outperforms JE in a more realistic asymmetric interference channel environment, though it still experiences some performance degradation due to power inefficiency of joint beamforming in asymmetric channel.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.250-251
• /
• 2007

산업용 조사장치로 전자빔은 활용도가 매우 높고, 대부분의 장치는 국내에서 제작이 어려울 뿐만 아니라 외국의존도 높다. 현재 미국, 일본, 러시아, 캐나다 등을 중심으로 약 1500 기의 전자빔 조사 설비가 산업용 및 연구용으로 설치되어 있는데, 이 중 많은 설비가 공동이용 연구시설 또는 상업적인 전자빔 조사서비스 시설로 운영되고 있다. 산업적으로 이용하기 위하여 철원물리기술연구소에 설치될 전자빔 조사 시설을 위한 전자빔 가속기를 개발 중이다. 곡물 살충 및 발아억제, 식품 저장, 위생용품 살균, 의약품 및 의료용구 살균, 전력반도체 생산 등의 분야에 전자빔 조사 설비를 응용할 수 있다. 본 논문에서는 산업용 조사 설비의 전원장치로 사용되는 펄스 모듈레이터의 설계, 제작 및 실험내용을 보이고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1552-1558
• /
• 2011

In this paper, the automotive beam using aluminium foam is designed and the impact analysis is carried out. The analysis model is the beam of actual size with B- type section structure. At the frontal crash of low speed, ANSYS AUTODYN is used by predicting the behavior of deformation and its internal energy. By the use of 7075-T6 aluminum alloy, the weight is reduced as much as 55% than steel. The deformation at the bumper foam of aluminum is similar with that of steel and the impact energy reduction at aluminum is more than steel. The foam filled with aluminum as much as 50 % has more impact energy absorption than the completely filled aluminum foam.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.290-294
• /
• 2020

In this paper, we quantitatively analyze the effect of lens aberration on the degradation of beam-coupling efficiency of a tiled coherent-beam combining system. The Zernike polynomial is used to quantify the aberration of the lens, and Fresnel diffraction is applied to numerically simulate the change in the peak light intensity when combined at a distance. The results of this paper will be useful for quantitative prediction of the beam-combining efficiency that is degraded by aberration of the lens, and it is expected to be helpful for the optimal design of a practical tiled coherent beam-combining system.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.276-285
• /
• 2021

This paper reports the study of the line-beam optical system of the laser lift-off (LLO) equipment used in the OLED manufacturing process. To obtain both a long process depth and a narrow width of the line beam, even with the poor M² value of the laser source, the research is focused on the optical system, including the beam transformation unit (BTU). We also propose optical configurations for the super-Gaussian distribution and the fiber-based BTU for the flat-top distribution.