• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.289-294
• /
• 2014

In this paper, we investigate the user scheduling, transmit beamforming, and receive beamforming of uplink space division multiple access (SDMA) systems where multiple users are allowed to transmit their signal to a base station (BS) using the same frequency band simultaneously. The BS performs a receive beamforming using the predetermined pseudo-random pattern and select users with a specific criterion. Especially, in this paper, we propose the threshold-based transmit power control, in which a user decrease its transmit power according if its generating interference to other users's signal is larger than a predetermined threshold. Assuming that the TDD system is used, the channel state information (CSI) can be obtained at each user from pilot signals from the BS. Simulation results show that the proposed technique significantly outperforms the existing user scheduling algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.503-505
• /
• 2018

본 논문에서는 마이크로파 무선전력전송에서 성능을 열화시키는 요인인 주파수 오프셋 문제와 위상 오차에 대해서 다룬다. 2.4GHz 대역을 사용하는 무선랜 표준에서 주파수 오프셋을 추정하기 위한 알고리즘을 소개하고 수신 전력을 증가시키기 위한 RF 빔포밍에 대해서 논의하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.3-10
• /
• 2000

This paper proposes acoustic holographic measuring system to estimate an absolute position of sound source. Using the measured signals, the estimation of the position is calculated by the Cross-spectrum algorithm of the beamformed signal and a linear arrayed microphone's signals. As the results of comparing the reference microphone method with beamforming method through the measurement of sound field, the beamforming acoustic holographic method is progressed above 20 percent than that of a reference microphone method in the resolution, and the utility of the proposed system could be confirmed.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2592-2594
• /
• 2002

본 논문에서는 GSC(Generalized Sidelobe Canceller)를 기초로 새로운 부밴드 광대역 적응 빔포밍 구조를 제안하였다. 일반적으로 여러개의 필터계수를 갖는 광대역 빔포밍에서는 그 필터길이가 커짐에 따라 많은 계산량을 필요로 하고 그 성능이 감소한다는 단점이 있었다. 이러한 단점을 보완하기 위해 부밴드 필터구조를 이용함으로써 전밴드 필터구조에서보다 더 낮은 계산량과 그 pre-whitening 효과로 그 성능이 향상되었다. 부밴드 필터뱅크 구조에서 광대역 적응 빔포밍이 수행될 때 NLMS(Normalized Least Mean Squares) 적응 알고리즘을 이용하여 GSC의 수렴성능을 검증하였고, 각각의 부밴드 적응필터에서 MSE를 독립적으로 최소화시키는 적응 메카니즘을 사용하여 추정하였다. 모의실험을 통하여 제안한 부밴드 필터구조가 전밴드 구조에서보다 수렴성능이 더 우수함을 검증하였다.

• The KIPS Transactions:PartA
• /
• v.18A no.2
• /
• pp.45-52
• /
• 2011

In the past, a patient went to the room where an ultrasound image diagnosis device was set, and then he or she was examined by a doctor. However, currently a doctor can go and examine the patient with a handheld ultrasound device who stays in a room. However, it was implemented with only fundamental functions, and can not meet the high performance required by the focusing algorithm of ultrasound beam which determines the quality of ultrasound image. In addition, low energy consumption was satisfied for the mobile ultrasound device. To satisfy these requirements, this paper proposes a high-performance and low-power single instruction, multiple data (SIMD) based multi-core processor that supports a representative beamforming algorithm out of several focusing methods of mobile ultrasound image signals. The proposed SIMD multi-core processor, which consists of 16 processing elements (PEs), satisfies the high-performance required by the beamforming algorithm by exploiting considerable data-level parallelism inherent in the echo image data of ultrasound. Experimental results showed that the proposed multi-core processor outperforms a commercial high-performance processor, TI DSP C6416, in terms of execution time (15.8 times better), energy efficiency (6.9 times better), and area efficiency (10 times better).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.96-102
• /
• 2010

This paper proposes a new adaptive algorithm to cancel the acoustic feedback and noise signals in the digital hearing aids. The proposed algorithm improves its convergence performances by canceling the speech signal from the residual signal using two microphones. The feedback canceller firstly cancels the feedback signal among the mic signal, and then it is reduced the noise using the beamforming method. To verify the performances of the proposed algorithm, the simulations were carried out for some cases. As the results of simulations, it was proved that the feedback canceller and the noise canceller advance about 14.43 dB for SFR, 10.19 dB for SNR respectively during speech, in the case of using the new algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.249-253
• /
• 2006

We propose a new beamforming algorithm, which is based on simplex downhill optimization method in the presence of pilot channels in cdma2000 reverse-link, for the rake structure antenna array in DS/CDMA communication system. Our approach uses the desired signal(pilot) covariance matrix and the interference covariance matrix. The beamforming weights are made according to maximum SINR criteria using simplex downhill optimization procedure. Our proposed scheme provides lower computational load, better convergence speed, better performance than existingadaptive beamforming algorithm. The simplex downhill method is well suited to finding the optimal or sub-optimal weight vector, since they require only the value of the deterministic function to be optimized. The rake beamformer performances are also evaluated under several set of practical parameter values with regard to spatial channel model. We also compare the performance between conventional rake receiver and the proposed one under same receiving power.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.119-128
• /
• 2011

This paper introduces design space exploration of many-core processors that meet high performance and low power required by the beamforming algorithm of image signals of mobile ultrasound. For the design space exploration of the many-core processor, we mapped different number of ultrasound image data to each processing element of many-core, and then determined an optimal many-core processor architecture in terms of execution time, energy efficiency and area efficiency. Experimental results indicate that PE=4096 and 1024 provide the highest energy efficiency and area efficiency, respectively. In addition, PE=4096 achieves 46x and 10x better than TI DSP C6416, which is widely used for ultrasound image devices, in terms of energy efficiency and area efficiency, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.4
• /
• pp.188-194
• /
• 2014

V2I(Vehicular to Infrastructure) is a one kind of communication systems which is used between the base stations and mobile objects. In V2I communication system, it is difficult to obtain the desired communication performance. Beamforming technology is to find the optimal path. and it can be improved the communication performance. MUSIC algorithm can be estimated the direction of arrival. The directional vector of received signals and the eigenvector has orthogonal property. MUSIC algorithm uses this property. In V2I communication environment, real time optimal path is changed. By the high computational complexity of the MUSIC algorithm, the optimal path estimation error is generated. In this paper, we propose a method of computation reduction algorithm for MUSIC algorithm.