• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.13-14
• /
• 2016

LTE 대역인 2.5-2.68GHz에서 동작하는 버틀러 스위치를 설계하기 위해 버틀러 매트릭스의 구성요소인 3dB 하이브리드 커플러와 크로스오버를 다단 브랜치 선로의 구조로 구성하여 광대역 특성을 갖는 평면 구조의 버틀러 스위치를 설계하였다. 설계된 버틀러 스위치는 동작대역에서 23.9dB ~ 34.18dB의 좋은 반사손실 특성과 비교적 작은 $7.124^{\circ}$의 위상오차를 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.212-219
• /
• 2002

In this paper, how to perform beamforming and power control for the systems with smart antennas is introduced in consideration of macro-diversity, and cell capacity of the systems is analyzed. In the result, as the number of the base stations linked to mobiles increases, capacity increases in the reverse link. On the other hand, macro diversity causes capacity loss in forward link. It is expected that the result of this work may be used in designing the next generation mobile communication systems for high quality services such as multi media data and wireless internet etc.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2386-2388
• /
• 2005

As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.280-283
• /
• 2002

In the manufacturing of large scale composite structures, the cost-effective processing and the enhancement of structural performance are critical. One of the most effective ways for this purpose is to use stitched multiaxial warp knitted (MWK) perform in the resin transfer molding process. This study reports the effect of stitching on the mechanical properties of MWK composites, and the feasibility processing of the thick U-beam structure utilizing the stitched preforms. Permeability of the preform, viscosity and cure property of the epoxy resin have been measured. The results of resin flow analysis has been used in determining the gate/vent locations of the RTM mold. Cross-sectional observation of the channel beam prototype demonstrated that the resin impregnation was almost complete, except for some surrounding area of stitched yarns.

• 기계와재료
• /
• v.23 no.4
• /
• pp.16-25
• /
• 2011

본고는 자연모사공학에서 출발하여, 자연계에 존재하는 건식 접착 성질을 이용하기 위한 방법으로서 게코도마뱀의 발바닥 섬모 구조를 모사하기 위한 방안들을 설명하고 그 응용분야를 전망한다. 도마뱀의 섬모 구조가 가지는 네 가지 특징들은 고분자 폴리머 재료와 나노 신장 기술, 2단계 UV 자외선 성형 기술, 전자빔 조사 등과 같은 기술을 통해 구조 및 기능의 모사가 가능하고 실제로 제작된 구조는 좋은 접착 특성을 나타냄을 알 수 있었다. 이를 토대로 다양한 섬모 구조에서의 접착 성능을 분석하고 실제 생활에서 바이오 패치로의 응용 가능성을 제시하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1279-1290
• /
• 2007

In this paper, a cylindrical hybrid antenna which is spatially fed by an off-set linear feed array is described to form complex beam patterns. The linear feed array consists of twelve micro-strip patch elements and forms a flat-topped beam pattern with a beam-width of $90^{\circ}$ in the horizontal plane. The vertical curve on the cylindrical reflector with the linear feed array is shaped in order to form a cosecant beam pattern within the range of $-5^{\circ}$ to $-25^{\circ}$ in the vertical plane. To form complex beam patterns, the hybrid antenna with cylindrical reflector aperture of $140{\times}50\;cm$ was designed and fabricated to be operated within the IMT 2000 service band, and also electrical performances of the antenna were measured and analyzed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.111-118
• /
• 2005

The shape of vertical pattern of base station antenna affects greatly quality of the communication of not only a service zone but also adjacent cells and then it is an important point to be considered in designing cell coverage. Currently type of vertical patterns to be applied to base station antenna are divided into five classes. In designing antenna, these five classes are applied solely or compositely according to the environment to be used antenna. In this paper, the dual polarized antenna for base station that is with a continuous electrical down tilting and with a shaped beam pattern, that an upper side lobe is suppressed and a lower null is filled, is designed and fabricated for synthesizing of the shape beant the pattern synthesis methods proposed by R. S. Elliott is used sequentially and for the electrical don tilting, the phased array theory is applied. Measured results show the down tilting range from 0° to 14°, the gain of Min. 13.3dBi and the upper side lobe of Max. -23dB. And we verified that upper side lobe is not to vary greatly and null filling performance is favorable overall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4711-4717
• /
• 2011

Formation of TiN films by PVD method and the DC and RF sputtering deposition method can be applied, the injected gas to generate plasma ionization rate of the film forming speed is slow away, anything to increase the adhesion between films limitations have. To improve this, to investigate the deposition and ion beam evaporation simultaneously IBAD(Ion beam assisted deposition) when used, Ion beam surface coating material prior to the survey because the surface cleaning effect of a large, high film adhesion can be obtained. In addition, the high vacuum and low temperature, high purity thin film of uniform thickness in the benefits is.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.81-88
• /
• 2014

Recently, a new imaging method, gamma vertex imaging (GVI), was proposed for the verification of in-vivo proton dose distribution. In GVI, the vertices of prompt gammas generated by proton induced nuclear interaction were determined by tracking the Compton-recoiled electrons. The GVI system is composed of a beryllium electron converter for converting gamma to electron, two double-sided silicon strip detectors (DSSDs) for the electron tracking, and a scintillation detector for the energy determination of the electron. In the present study, the modules of a charge sensitive preamplifier (CSP) and a shaping amplifier for the analog signal processing of DSSD were developed and the performances were evaluated by comparing the energy resolutions with those of the commercial products. Based on the results, it was confirmed that the energy resolution of the developed CSP module was a little lower than that of the CR-113 (Cremat, Inc., MA), and the resolution of the shaping amplifier was similar to that of the CR-200 (Cremat, Inc., MA). The value of $V_{rms}$ representing the magnitude of noise of the developed system was estimated as 6.48 keV and it was confirmed that the trajectory of the electron can be measured by the developed system considering the minimum energy deposition ( > ~51 keV) of Compton-recoiled electron in 145-${\mu}m$-thick DSSD.