• CDE review
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2015

본 글을 통해 학생들과 함께 수행한 다양한 디지털 디자인 모델을 기반으로 5가지의 디지털 패브리케이션 방식을 적용하여 여러 실제 인테리어패널의 제작 과정 및 그 결과물들을 요약적으로 소개하였다. 해당 과정은 기존의 분리된 설계와 제작 및 시공이 아닌, 설계-제작 통합적인 접근방법을 활용함으로써 학생들로 하여금 디지털 디자인과 패브리케이션의 효과를 극대화 할 수 있음을 체득하도록 하였다. 패브리케이션 기기 및 재료 등의 차이점에 따라 실제 구현된 모델과 원래의 디지털 모델과의 형상적인 차이점은 아직까지 한계점으로 남을 수 있지만, 비정형적으로 생성된 디지털 디자인의 형상이 직접적으로 실현이 가능하다는 점에서 의의가 있다고 할 수 있다. 또한 패러매트릭 모델링 기법이나 실제 제작 경험이 거의 없는 학생들을 대상으로 개별적인 교육이 아닌 설계-제작 통합적인 교육을 실시함으로써 각 요소들이 어떻게 유기적으로 관련되어 디지털 디자인 과정이나 패브리케이션과정에서 상호 보완적으로 중요한지 직접 체득할 수 있도록 하였다는데 의의가 있다. 본 글에서 소개한 재료를 깎는 등의 방식인 "마이너스"의 방식이 아닌 3D프린팅과 같이 재료를 이용해 만들어가는 "플러스"적인 방식 또한 해당 사례에서 수행되었으며 마찬가지로 다양한 특성을 지니고 있으나, 본 글에서는 전자의 방식에 대해 주로 논하였다. 본 글에서 다룬 제작기법뿐만 아니라 3D프린팅 기술의 발전과 보급에 따라 디지털 패브리케이션 역시 다양하게 진보하고 있으며, 팹랩 등을 통한 학교에서의 건축설계 교육도 다양하게 진화하고 있다. 본 사례 및 기타 실험적인 교육과 선도적인 여러 시도를 통해서, 디지털 디자인과 패브리케이션 영역을 확장시켜나가고 해당 기술의 발전에 적극적으로 보조할 수 있는 교육과정을 수립하고 이행하는데 일조 할 수 있기를 희망한다.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.123-130
• /
• 2011

BIM based design methodology requires more information than traditional design methodology in order to insure efficiency throughout the project. BIM based design not only requires all building data in the form of 3D shapes, but also all other relevant data regarding building components. Information is typically grouped in a standard classification system such as by standardized material names. The development of a domestic BIM based standard classification system is yet to be created and deployed in the industry. Each designer is specifying their own building information classification systems which is causing inconsistency in the industry. Therefore BIM based designs, are causing confusion in the industry as each designer follow no guidelines for material standardization classification. The lack of information regarding this in the BIM template will continue to cause confusion about a projects building information data consistently. This study is that of preliminary research to develop a BIM template. First, overseas BIM templates were analyzed regarding BIM standards and documentation. Examination then followed regarding the element and characteristics needed for the development of a BIM template, a suggested hierarchy of elements required for a BIM template were then made. The result of this research is that it will be used to develop a "BIM template prototype", to support the generation of building information data regarding neighborhood facilities.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.24-32
• /
• 2005

Micro-source units having power ratings in thousands of watts can provide power quality with higher reliability and efficiency than the conventional large scale units. Since these units are small and easy to install, they are clustered with loads creating micro-grid services to customer sites such as office buildings, industrial parks and homes. Micro-sources adopt voltage source inverter to ensure the power quality of sensitive loads. This paper deals with the connection of micro-sources into the system grid EMTDC modeling of the grid connected micro-sources at the power frequency range are proposed and the characteristics of the control system parameters are investigated. Simulation results show that the micro-grid system with two micro-sources has good dynamic characteristics.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.210-216
• /
• 2009

Distributed Generation (DG) is predicted to play a important role in electric power system in the near future. insertion of DG system into existing distribution network has great impact on real-time system operation and planning. It is widely accepted that micro turbine generation (MTG) systems are currently attracting lot of attention to meet customers need in the distributed power generation market. In order to investigate the performance of MT generation systems, their efficient modeling is required. This paper presents the modeling and simulation of a MT generation system suitable for stand-alone operation. The system comprises of a permanent magnet synchronous generator driven by a MT. A brief description of the overall system is given, and mathematical models for the MT and permanent magnet synchronous generator are presented. Also, the use of power electronics in conditioning the power output of the generating system is demonstrated. Simulation studies with MATLAB/Simulink have been carried out in stand-alone operation mode of a DG system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.818-819
• /
• 2010

고층빌딩, 지하역사와 같은 대형 복합건물은 건물 자체의 복합도 증가와 더불어 이에 따른 위험요소(hazard)의 증가를 가져오고 위험상황에 대처해야 할 소방관들의 대응기술 및 훈련도 고도화되어야 한다. 실제 화재현장, 특히 대형 복합건물에 대한 훈련은 비용, 시간뿐만 아니라 소방관 안전 확보라는 차원에서 불가능하며 반복적인 훈련이나 그 평가가 어렵다는 점에서 가상환경을 이용한 훈련 시스템이 필요하다. 본 논문에서는 복합건물에 대한 소방관 팀 훈련 시스템 구현을 위한 가상환경의 설계 및 구현을 소개하고자 한다. 가상환경은 소방관의 훈련 및 평가, 팀 단위훈련을 제공하고 현실감 있는 훈련을 위하여 가상현실, 증강현실, 물리체험 모듈을 이용한 사용자 인터페이스를 제공한다. 가상환경 구축을 위하여 대상 건축물에 대한 3 차원 모델을 구축하고 도출된 발생 가능한 화재 시나리오에 대한 수치적 모델링을 수행하고 그 결과를 가상환경 및 훈련 시나리오에 반영하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.175-184
• /
• 2006

Two methods of the nonlinear static pushover analysis have been presented for the performance-based seismic design and evaluation of MDOF continuous bridges. Guidelines for buildings presented in FEMA-273 applying the Displacement Coefficient Method (DCM) and in ATC applying the Capacity Spectrum Method(CSM) have been modified for MDOF bridges. Two methods are compared with the time- history analysis. The lateral load distribution pattern for seismic loads has been examined in the static pushover analysis. The force-based fiber frame finite element has been implemented in the modeling of reinforced concrete piers.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.3-11
• /
• 2023

Building information modeling (BIM) can help to visualize and manage the building-related information at the object-based level, and it is possible to help link the tasks in the network of Hanok construction. While many studies have significant interest in using BIM for modern construction, there is only few studies to observe the use of BIM for traditional construction, commonly called Hanok construction in South Korea. Hence, the main goal of this study is to develop a system dynamic model for investigating how the BIM can be widely used for Hanok construction. To this end, this study identified the factors influencing the BIM uses for the Hanok construction, developed a causal loop diagram (CLD) to investigate the interrelationships among the factors, and provided a final model based on the mathematical definitions. Based on the scenario analysis, it is demonstrated that the support to building Hanok and education cost for BIM positively influence activating and using the BIM for the Hanok construction. Based on the dynamics of the factors identified in this study, it is important to consider expanding support for Hanok construction and education cost for BIM to successfully integrate and utilize BIM in the construction industry.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.13-21
• /
• 2016

In this paper we are trying to explain the effect of temperature on polymer membrane exchange water electrolysis (PEMWE) and polymer membrane exchange fuel cell (PEMFC) simultaneously. A comprehensive studying approach is proposed and applied to a 50Watt PEM fuel cell system in the laboratory. The monitoring process is carried out through wireless LoRa node and gateway network concept. In this experiment, temperature sensor measure the temperature level of electrolyzer, fuel cell stack and $H_2$ storage tank and transmitted the measured value of data to the management control unit (MCU) through the individual node and gateway of each PEMWE and PEMFC. In MCU we can monitor the temperature and its effect on the performance of the fuel cell system and control it to keep the lower heating value to increase the efficiency of the fuel cell system. And we also proposed a mathematical model and operation algorithm for PEMWE and PEMFC. In this model, PEMWE gives higher efficiency at lower heating level where as PEMFC gives higher efficiency at higher heating value. In order to increase the performance of the fuel cell system, we are going to monitor, communicate and control the temperature and pressure of PEMWE and PEMFC by installing these systems in a building of university which is located in the southern part of Korea.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2015

For decades, the productivity issue has been a primary concern for the all stake-holders who participate in domestic construction industry. Especially, between a whole life cycle of building, the construction phase's productivity problem makes or break the entire project. In this respect, the general construction company, who accept the order and construct the building(so called General Contractor), should consider various strategies, such as schedule management, cost management, quality management, inner-crew management, etc., for the productivity improvement., and almost of these management methods have been studied for a long time. But, the researches and studies about the specialty contractor, who construct the building directly in construction site were not sufficiently complete yet. This research begins as an idea which tries to apply the BIM(Building Information Modeling) into the tasks of Specialty contractors for their productivity improvement. And for the effective application of construction BIM to specialty contractors, establish of the BIM project execution plan for them, not the fragmentary adoption of BIM. Therefore, in this paper, we develop the BIM project execution plan for the reinforced concrete companies who conduct the framework construction which located on CP(Critical Path) Especially, we model the "Construction BIM Use List for the RC Work", "BIM Application Master Process" and "BIM Application Detailed Process", and general contractor who use these BIM uses list and process models can manage various specialty contractors about schedule, cost, earned value, quality, safety and environment management systematically.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.659-667
• /
• 2011

Wind tunnels tests have been evaluating wind load estimation by discussing the most important design elements in very tall buildings. Such tests have some uncertainties, however, with respect to the data of the reduced model and the calculated empirical values. In contrast, CFD analysis can simulate the actual scale and shorten the time of simulation. Nevertheless, the utilization of CFD analysis is negligible because of its low reliability. In this paper, the reliability of CFD analysis will be proven by comparing the results of a wind tunnel test and CFD analysis for the prototype models shown in previous studies. The effect of the turbulence intensity on the reliability is also presented.