• Title/Summary/Keyword: 비행 특성

Search Result 818, Processing Time 0.023 seconds

A Study on RCS Calculation of Dipoles for Effective Chaff Design (효과적인 채프 설계를 위한 다이폴의 RCS 계산에 관한 연구)

  • Lim, Joong-Soo;Chae, Gyoo-Soo;Kim, Min-Nyun
    • Proceedings of the KAIS Fall Conference
    • /
    • 2008.05a
    • /
    • pp.234-236
    • /
    • 2008
  • 본 논문에서는 비행체 보호를 위해 널리 사용되고 있는 채프를 설계 할 때 효과적인 다이폴의 개수를 예측하기 위한 이론적인 계산이 수행 되었다. 채프를 레이더 사용주파수 전 대역(2~12GHz)에서 다이폴 안테나로 가정하고, 다이폴 안테나의 산란특성 분석을 통하여 레이더 반사단면적(RCS : Radar Cross Section)를 예측하였다. 기존에 소개된 이론을 기초로 Matlab을 이용한 RCS 계산 프로그램을 사용하여 계산한 결과를 비교 하였다.

  • PDF

Flow Characteristics of Annular Gas Turbine Combustor (환형 가스터빈엔진 연소기 유동 특성 연구)

  • Woo S. P.;Jeung I. S.
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2004.10a
    • /
    • pp.36-40
    • /
    • 2004
  • Experimental and numerical studies are carried out for inner flow of small gas turbine engine combustor at normal operating altitude and velocity. First of all inner flow and combustion phenomenon without a load is analyzed for understanding with various back pressure condition due to flight mode of smart UAV.

  • PDF

Servo Filter Design for KSR-III Gimbal Actuation System (KSR-III 김발엔진 구동장치 서보필터 설계)

  • Sun, Byung-Chan;Park, Yong-Kyu;Choi, Hyung-Don
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.32 no.10
    • /
    • pp.83-92
    • /
    • 2004
  • This paper concerns servo filter design for KSR-III gimbal engine actuation system. When the actuator system is attached to engine mount frame, unexpected resonant modes in low frequency can occur and make the control system unstable. In order to prevent the resonance in the actuation system, a proper lowpass servo filter is designed. Based on the dynamic test data including the resonant effect, the shape of the servo filter is determined, and then the corresponding parameters are optimally designed. The best solution is finally selected via dynamic tests including the servo filter.

A Study on the electron energy diffusion function of the sulphur hexaflouride ($ SF_6$가스의 전자에너지 분포함수에 관한 연구)

  • 김상남;하성철
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.2
    • /
    • pp.95-101
    • /
    • 1999
  • The electron energy distributions function were analysed in sulIitur hexaflowide at E/N : 500~800(Td) for a case of non-equilibrium region in the nran electron energy. This papa- describes the electron transport characteristics in $ SF_6$ gas calculated for range of E/N values from 150~800(Td) by the Monte Carlo simulation and Boltzmann equation Irethod using a set of electron collision cross sectioos determined by the authors and the values of electron swarm parameters. The results gained that the value of an electron swarm parameter such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The properties of electron avalanches in an electron energy non-equilibrium region.region.

  • PDF

A Electric Power Source Modeling and Simulation for Electric Propulsion Systems of a Fuel Cell Powered Small UAV (소형 연료전지 무인기의 전기추진시스템용 전력원 모델링 및 시뮬레이션)

  • Lee, Bo-Hwa;Park, Poo-Min;Kim, Chun-Taek;Kim, Sung-Yug;Yang, Soo-Seok;Ahn, Seok-Min
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.39 no.10
    • /
    • pp.959-965
    • /
    • 2011
  • A modeling and power simulation of a small UAV's electric propulsion systems is described. Each power source is modeled and simulated in Matlab/Simulink and it is compared flight test data during 4 hr 30 min with simulation results about 200 W electric propulsion system using fuel cell and battery as a main power sources. In result, it is properly simulated performance and dynamic characteristic of each electric power source. Through this, it is revealed that the simulation is available as a means of predicting power characteristic variation for electric propulsion systems of different class.

Time-to-go Polynomial Guidance Law for Target Observability Enhancement (표적 가관측성 향상을 위한 Time-to-go 다항식 유도법칙)

  • Kim, Tae-Hun;Lee, Chang-Hun;Tahk, Min-Jea
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.39 no.1
    • /
    • pp.16-24
    • /
    • 2011
  • In this paper, we propose a new guidance law for target observability enhancement, which can control both terminal impact angle and acceleration. The proposed guidance law is simple form, combined conventional time-to-go polynomial guidance and a additional bias term which consists of relative position and proportional gain. The guidance law provides oscillatory flight trajectory and it maintains the conventional time-to-go polynomial guidance performance. To investigate the characteristics of the guidance law, we derive the closed-form solution, and various simulations are performed for proving the validity of the proposed guidance.

시뮬레이션 기반소프트웨어에 대한 사례 연구

  • Lee, Myeong-Sin;Choe, Su-Jin;Jeong, Dae-Won;Im, Hyeon-Jeong;Jeong, Tae-Jin
    • Bulletin of the Korean Space Science Society
    • /
    • 2011.04a
    • /
    • pp.32.4-33
    • /
    • 2011
  • 관제시뮬레이터는 위성운용의 준비 및 위성운용 기간 동안의 운용절차의 검증, 지상관제 시스템의 시험, 운영자의 교육 및 훈련 등을 목적으로 활용될 수 있다. 시뮬레이터는 보통 운영체제, 미들웨어, 시뮬레이션 기반소프트웨어, 에뮬레이터 및 위성과 외부 환경의 모델링 부분으로 구성된다. 에뮬레이터는 위성의 비행소프트웨어의 이미지를 어떤 수정없이 실제적으로 실행할 수 있게 한다. 위성의 모델링 부분은 시뮬레이터의 운용목적에 맞는 각종 하드웨어와 기능들에 대해서 수학적 방정식 등을 이용하여 위성 및 외부환경을 실제적으로 모델링하는 부분으로 구성된다. 이외에 시뮬레이션의 제어 및 관리와 사용자 접속부분을 관리할 수 있는 모듈들이 추가적으로 구성된다. 시뮬레이션 기반소프트웨어는 이러한 시뮬레이션 구성요소(Component)들을 사용자 환경설정 파일에 기반하여 통합하여 구현 및 운용할 수 있는 환경을 제공한다. 구현되는 시뮬레이터의 틀(Framework)로써 모듈간 각종 데이터의 표준 입출력, 일반적인 모델 등을 제공한다. 운용되고 있는 세계 각국의 위성 시뮬레이터에서 SIMSAT, SIMWARE 등의 시뮬레이션 기반소프트웨어가 활용되고 있으며, 관제시뮬레이터가 개발될 경우 기반소프트웨어의 자체개발 또는 기존 상용제품 활용의 여부가 우선적으로 결정되어야 할 것이며, 또한 기존 상용제품 활용 시 각 기반소프트웨어의 특성을 분석하여 적절한 기반소프트웨어의 선택이 결정되어야 할 것이다. 이 논문에서는 시뮬레이션 기반소프트웨어의 기능 및 현재 활용되고 있는 상용제품의 특성에 대해서 분석비교를 기술한다.

  • PDF

Design and Analysis of Flexbeam in SNUF Blade Equipped with Active Trailing-Edge Flap for Helicopter Vibratory Load Reduction (헬리콥터 진동 하중 저감을 위한 능동 뒷전 플랩이 장착된 SNUF 블레이드의 유연보의 설계 및 해석)

  • Im, Byeong-Uk;Eun, Won-Jong;Shin, SangJoon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.46 no.7
    • /
    • pp.542-550
    • /
    • 2018
  • This paper presents design of a bearingless main rotor of SNUF (Seoul National University Flap) blade equipped with active trailing-edge flap to reduce the hub vibratory loads during helicopter forward flight. For that purpose, sectional design of the flexbeam is carried out using the thin-walled composite material rotating beam vibration analysis program (CORBA77_MEMB) in EDISON. Using the multi-body dynamics analysis program, DYMORE, blade dynamic characteristics and those of the loads control are examined using the active trailing-edge flap in terms of the flexbeam sectional design.

램제트 엔진 흡입구의 점성 유동장 수치계산

  • 강호철;신동신
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2002.04a
    • /
    • pp.59-59
    • /
    • 2002
  • 램제트 추진기관은 압축과정을 별도의 부품 없이 형상에 의해서 감속하여 연소 압력비를 얻는다. 따라서 구동 마하수와 형상에 의해 흡입과정의 압축 효율이 결정된다. 설계점은 충분한 유량을 확보 할 수 있는 유량과 충격파 각을 조절하여 전압력 손실을 줄이도록 고려되어야 한다. 또한 연소가 일어나면 연소실 압력이 배압으로 작용하고 비행시에 받음각은 변하므로 이에 따른 성능 분석도 고려 되어야 할 사항이다. 본 연구는 국내에서 실험한 형상에 대해 수치계산을 수행하여 코드의 검증과 아울러 램제트 유동장의 수치적 시뮬레이션도 설계단계에서 하나의 도구로 이용할 수 있음을 보여준다. 실험에서는 배압 조건을 얻기 위해 유동 블록키지를 유로 내에 두어 상응하는 배압을 얻었지만 본 계산에서는 압력 경계조건을 직접 사용하였다. 유동이 비정상 특성을 가지므로 시간 정확도를 이차로 가지도록 이중시간 전진법을 사용하였다. 사용한 압력비는 충격파가 카울 끝에 닿는 임계상태에 가까운 12, 13, 14에 대해 계산을 수행하였고 부스터모드로 흡입구 끝이 막혀 있다가 램제트 모드로 바뀌어 연소실 압력이 위의 압력비라고 가정할 때의 비정상 천이 과정을 계산해 보았다. 본 계산은 흡입구 부분만을 떼어놓고 적절한 가정 하에 수행되었지만 연소실 내부도 비정상 특성을 가지므로 흡입구와 연소실을 동시에 같이 계산해야한다. 추후에 전체적인 계산을 진행하기 위한 전 단계로 흡입구 계산만을 수행하여 실험과 잘 일치하는 계산 결과를 얻었고 전체 계산을 위한 연구는 진행 중에 있다.

  • PDF

Characteristic Research for Scramjet Engine with Thrust Nozzle Variation (추력 노즐 변화에 따른 스크램제트 엔진 특성 연구)

  • Lee, Yang-Ji;Kang, Sang-Hun;Yang, Soo-Seok
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.11a
    • /
    • pp.613-617
    • /
    • 2011
  • Korea Aerospace Research Institute has been designed and manufactured various thurst nozzles of the scramjet engine for optimized configuration. The test campaign for thurst nozzle characteristics was performed at T4 free-piston shock tunnel in University of Queensland, Australia. Total 8 kinds of thrust nozzles and 2 kinds of side walls were manufactured for this campaign. In this paper, the design and specification of thrust nozzles was reported. Based on the static pressure distribution of the engine and pitot pressure distributions at nozzle exit, The positive net thurst was observed with baseline case of the test campaign.

  • PDF