• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.43-50
• /
• 2006

The major objective of this paper is to propose a hybrid simulation environment for autonomous UAV system by integrating the continuous-time model with discrete-event model. Proposed system is able to support high autonomous behavior by combining the planner, recognizer, and controller model to deal with the HL20 AIRPLANE model. Thus, the high level decision may be efficiently issued even upon the unexpected circumstance. The proposed system model has been successfully verified by several simulation test performed on the DEVS simulation S/W environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.10
• /
• pp.884-892
• /
• 2014

In this paper, a meta model using neural network substituting for the simulator aerodynamic database is proposed to improve simulation fidelity near the critical flight area and real-time performance. It is shown that the accuracy of the meta model is relatively higher than the existing table lookup methods for arbitrary nonlinear database and the calculation speed is also improved for a specific F-16 maneuver simulation. The increase in the number of hidden nodes in the meta model for better accuracy of database representations causes a delay in function generation due to increased time required for computing exponential functions. In order to make up this drawback, we additionally study the fast exponential function method.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.133-140
• /
• 2018

In recent years, model-based design techniques have been used as a way to support cost reduction and safety certification in the development of avionics systems. In order to support performance analysis and safety analysis of aircraft and avionics equipment (item) using model based design, we developed a multi-domain simulation environment that inter-works with heterogeneous simulators. We present a multi-domain simulation environment that can verify air data computers and integrated multi-function probes at the aircraft level. The model was developed by Simulink and the flight simulator X-Plane 10 was used to verify the model at the aircraft level. Avionics model functions were tested at the aircraft level and the air data errors of the model and flight simulator were measured within 0.1%.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.288-295
• /
• 2014

Current ILS is difficult for the many aircraft to access to the system at the same time because of it's system. And the equipments should be installed at the direction of every runway. Also, There is limitation that landing procedures must be have of only ILS single course when the aircraft land on the ground. hereupon, The more air traffic exist, the longer delay time of flight be. GBAS using the GNSS has been developed to overcome those limitations. Before flight test in Teean airport, this paper compares the taean approach procedure and curved approach procedure by using the simulator. Comparison study shows that curved approach procedure takes less flight time, low fuel consumpsion and make it possible to avoid noise airspace more than original procedure.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.9-16
• /
• 2017

Researchers are now faced with a limited flight time of the hoverable UAV due to the sluggish technological advances of the Li-Po energy density and try to find a bypassing solution for the fully autonomous hoverable UAV mission planning. Although there are several candidate solutions, automated wireless charging is the most likely and realistic candidate and we are focusing on the autolanding strategy of the hoverable UAV in this paper since it is the main technology of it. We developed a hoverable UAV flight simulator including Li-Po battery pack simulator using MATLAB/Simulink and UAV flight and battery states are analyzed. The maximum motor power measured as 1,647 W occurs during the takeoff and cell voltage decreases down to 3.39 V during the procedure. It proves that the two Li-Po battery packs having 22 Ah and connected in series forming 12S1P are appropriate for the autolanding mission planning.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.83-90
• /
• 2008

The next generation LID satellite has 64KB PROM which contains the boot loader and the monitor software, and two 4MB NVMEMs which are used for flight software storage. The boot loader has two operation modes which are the flight software mode and the monitor mode. In the flight software mode, it checks CRC checksum of selected NVMEM and copies flight software image from NVMEM to RAM And then it starts VxWorks RTOS in RAM, creates flight software tasks, and starts execution of flight software. In the monitor mode, it activates monitor software which performs NVMEM reprogramming and board-level testing on the ground. This paper is to present the design of Boot ROM software and verification method using simulator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.731-738
• /
• 2015

The rapid prototyping process and development tool which enable the control law evaluation efficiently are needed to minimize the development cycle, cost and risk of aircraft flight control system. This paper describes a development process that integrates the designed control law into HETLAS to evaluate simulation effectively using nonlinear mathematical models. The desktop engineering simulator was developed using HETLAS for the piloted simulation evaluation of a various control modes and the procedure was developed, which quickly integrates the HETLAS into HQS(Handling Quality Simulator) and HILS(Hardware In the Loop Simulation) environments. This paper presents a rapid prototyping process using HETLAS that significantly shortens the integration process of the control law into the nonlinear math model, HETLAS, and allows the control law designs to be quickly tested in the piloted simulation and HILS environments.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.15-22
• /
• 2019

In this paper, a global and local flight path system for autonomous flight of the UAV is proposed. The overall system is based on the ROS robot operating system. The UAV in-built computer detects obstacles through 2-D Lidar and generates real-time local path and global path based on VFH and Modified $RRT^*$-Smart, respectively. Additionally, a movement command is issued based on the generated path on the UAV flight controller. The ground station computer receives the obstacle information and generates a 2-D SLAM map, transmits the destination point to the embedded computer, and manages the state of the UAV. The autonomous UAV flight system of the is verified through a simulator and actual flight.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.8-15
• /
• 2023

According to the results of a survey of pilots, 92% or 230 out of 252 respondents said they had experienced flight errors during flight. As so many pilots are experiencing Spatial Disorientation, and this is one of the main causes of aircraft accidents and loss of life, so it is important to understand accurately. However, in Korea, training equipment for fixed-wing pilots has already been developed and trained, or recently developed, and some equipment for helicopter pilots is available in the Korea Air Force, but there is no environment for helicopter pilots to receive training in Spatial Disorientation prevention. Therefore, we intend to produce a helicopter-only simulator, present a program to prevent possible Spatial Disorientation during flights for helicopter pilots, and propose legal and institutional measures based on future training data.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.88-98
• /
• 2024

In this paper, an Automatic Terrain Following (ATF) Simulator using Digital Terrain Elevation Data (DTED) was proposed. This ATF Simulator consists of a Flight Simulator, a Radar Simulator, and a Terrain Following Computer (TFC) Simulator. DTED and radar scan data generated with DTED were used as the terrain information necessary for terrain following. The ATF Simulator provides three modes of operation: a passive mode that uses DTED, an active mode that uses radar scan data, and a hybrid mode that uses both. We developed an ATF Simulator that could reduce the cost and time required to develop a terrain following system using the LabVIEW development environment and the MATLAB App Designer development environment. It was verified by confirming that the ATF Simulator met all functional requirements.