• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.50-59
• /
• 2005

This paper described performance test of 1st prototype "Tail-Fan" system. KARI(Korea Aerospace Research Institute) developed "Tail-Fan" system as a kind of helicopter anti-torque system(ATS) and designed ATS performance test-rig for Tail-Fan system performance test. For Tail-Fan system performance tests, firstly, test-rig operation tests were carried out for verification of design specifications. And natural frequencies of fan blade and test-rig were measured respectively. To find the operation rotating speed for performance tests, vibration tests using accelerometers on tail gear box(TGB) were carried out. Through the fanplot and vibration test results, rotational speed for Tail-Fan performance test to avoid a resonance were found and performance tests were carried out in flight conditions. We analyzed test data by non-dimensionalization. Through this results, 1st prototype "Tail-Fan" system was satisfied with design requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.921-924
• /
• 2010

정지궤도 위성을 제외한 대부분의 저궤도 위성 및 심우주 관측용 위성은 임무를 수행하면서 하루동안에도 제한된 시간동안만 지상국과의 통신이 가능하다. 따라서 위성 운영에 고수준의 자율적 제어기능이 요구된다. OBCP(On-Board Control Procedures)는 별도로 개발된 언어로 작성한 작은 용량의 스크립트 프로그램을 통해 위성을 제어하는 기능을 제공한다. 이러한 방법을 통해 지상관제 시에 위성의 임무수행동안 수행되어야 하는 다양하고 복잡한 운영 시퀀스를 용이하게 준비하고 업로드할 수 있다. OBCP는 위성비행소프트웨어와는 분리된 별도의 서브시스템으로 수행되기 때문에 새로운 위성운영 프로시져의 생성을 위해 위성비행소프트웨어의 수정, 재검증, 코드업로드 등의 절차가 요구되지 않으며 지상에서 개발 및 검증시험을 완벽하게 수행할 수 있다. 본 논문에서는 기존의 저궤도 관측위성에서 사용되었던 위성의 자율적 제어 시퀀스 기능과 OBCP의 기능을 비교하여 설명하고, 실제 Herschel and Plank 위성에 활용된 예를 통해 OBCP의 개념 및 설계 방안에 대하여 소개한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.109-115
• /
• 2011

Development cases of space launch vehicle upper stage engine were studied. HM-7, Vinci, LE-5, RL10 engines are representative upper stage engines of Europe, Japan, and United States. It was realized that upper stage engines were developed with more than two engine test facilities and the development period was 5 to 8 years accompanied with 10~11 engines.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.136.1-136.1
• /
• 2012

저궤도지구관측 위성의 태양전지판은 위성이 궤도에 진입하고나서 전개된 후 위성에 전력을 공급하는 임무를 전담하는 중요 시스템이다. 이러한 시스템이 정상적인 임무 수행을 위해서는 우주 환경에서의 원활한 전개가 필수적이다. 따라서 위성은 발사이전 개발과정에서 태양전지판에 대한 전개성이 완벽히 검증되어야 한다. 이를 위해 무중력 조건을 모사하는 별도의 시험 장치를 활용하여 태양전지판의 전개 시험이 실시된다. 본 논문에서는 저궤도지구관측위성용 태양전지판의 비행모델에 대하여 실시한 전개 시험 방법 및 분석 내용을 소개하고자한다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2010

Flight test is the final and a mandatory process for the development of unmanned aerial vehicles(UAVs) as well as manned. Since most UAVs fly in a low speed and are prone to adverse weather conditions such as air turbulence, atmospheric weather environment around flight test regions will be a critical item to be considered for a flight test planning for UAVs. In this paper, we suggest a decision method for a UAV flight test schedule based on weather conditions of surface and upper atmospheres and also introduce a program for an effective flight test planning through weather forecasts.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.24-31
• /
• 2005

This paper presents an implementation of a real-time multi-sensor data fusion algorithm for Flight Test Computer. The sensor data consist of positional information of the target from a radar, a GPS receiver and an INS. The data fusion algorithm is designed by the 21st order distributed Kalman Filter which is based on the PVA model with sensor bias states. A fault detection and correction logics are included in the algorithm for bad measurements and sensor faults. The statistical parameters for the states are obtained from Monte Carlo simulations and covariance analysis using test tracking data. The designed filter is verified by using real data both in post processing and real-time processing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.39-48
• /
• 2005

After the development of the Firefly, flight tests have been performed to verify the performance and get the parameters for the mathematical model of the aircraft. The flight test data is used to get parameters for the mathematical model of the aircraft through the parameter identification process. An arbitrary control input is applied to the test flight which is a part of parameter identification process. A square wave has been used a control input which is called Doublet signal. The aspect of the signal is same length and magnitude in both (+) and (-) directions such as sine wave. The Doublet signal is composed of a dominant frequency and many high frequencies, so that it is appropriate signal to excite the motion of an aircraft. In this paper, the control input of the flight test data has been analyzed to check the efficiency of the control input using DFT(Discrete Fourier Transform). From the result of analysis, an alternative input was extracted.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.314-318
• /
• 2013

Tests and evaluations following the U.S. MIL-HDBK/STANDARD were successfully conducted to assure the performance of the air-to-surface guidance kit which was developed first in Korea. Various ground tests confirmed the operation capability and reliability of the guidance kit, and flight tests proved very good mid-range gliding performance and accuracy of the gliding bomb which was a general purpose bomb with the guidance kit.