• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.167-170
• /
• 2003

'Jinsun', a new variety of safflower(Carthamus tinctoris L.), was developed by Kyonggi-do Agricultural Research and Extension Services in 2000. It was bred with pure line selection from Namwon local variety population. Jinsun is relatively resistant to Gleosporium carthami and has more flower head and higher ripened grain ratio. Its flowering date was June 22 in Hwaseong, Gyeonggido and contains more protein and linoleic acid relatively in grain compared with Cheongsu, check variety. Grain yield of Jinsun was 11% higher than Cheongsu.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.53-59
• /
• 2016

Ultrasonic nonlinear evaluation is generally utilized for detection of not only defects but also microdamage such as corrosion and plastic deformation. Nonlinearity is determined by the amplitude ratio of primary wave second harmonic wave, and the results of its comparison are used for evaluation. Owing to the experimental features, the experimental nonlinearity result contains system nonlinearity and material nonlinearity. System nonlinearity is that which is unwanted by the user; hence, it acts as an error and interrupts analysis. In this study, a bulk wave mixing technique is implemented in order to minimize the system nonlinearity and obtain the reliable analysis results. The biggest advantage of this technique is that experimental nonlinearity contains less system nonlinearity than that for the conventional nonlinear ultrasonic technique. Theoretical and experimental verifications are performed in this study. By comparing the results of the bulk wave mixing technique with those of the conventional technique, the strengths, weaknesses, and application validity of the bulk wave mixing technique are determined.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.4-4
• /
• 2017

수문자료의 빈도해석은 자료의 독립성(independence)와 정상성(stationarity)를 가정하여 이뤄진다. 그러나 관측 수문자료에서 비정상성 현상이 발생하고 있다는 사실이 관측되면서 수문자료에 대한 비정상성 빈도해석에 대한 필요성도 커지고 있다. 본 연구의 목적은 수문자료의 빈도해석에서 가장 널리 사용되고 있는 Gumbel 및 GEV 분포에 대한 비정상성 빈도해석 모형을 개발하는 것으로, 이를 위해 비정상성 Gumbel과 GEV 모형의 매개변수를 시간에 따라 변하는 형태로 정의하였다. 비정상성 Gumbel 및 GEV 모형의 정확도를 알아보기 위해 비정상성 모형과정상성 모형을 이용하여 Monte Carlo 모의실험을 수행하였다. 모의실험은 다양한 조건의 재현기간, 표본크기, 매개변수 조건을 고려하여 수행되었다. 그 결과 비정상성 모형의 오차는 비교적 표본크기가 클 때 가장 작은 것으로 나타났다. 또한 복잡한 매개변수의 조합을 가지는 비정상성 모형은 모두 동일한 경향성을 가질 때 가장 작은 오차를 보이는 것으로 나타났다. 비정상성 GEV 모형의 경우는 확률수문량 산정에 음(-)의 형상 매개변수가 큰 영향을 끼치는 것으로 나타났다. 또한 본 연구에서는 비정상성 조건에서 다양하게 존재하는 비정상성 모형 중 어떠한 모형이 주어진 자료에 대해 가장 적절한 모형인지 결정하기 위해 모의실험을 수행하였다. 널리 적용되고 있는 AIC, BIC, likelihood ratio test에 대해 정상성 및 비정상성 Gumbel 모형을 이용하여 모의실험을 수행한 결과, AIC가 비정상성 모형 중 적정 모형 선택에 가장 효과적인 것으로 나타났다. 개발된 비정상성 Gumbel 및 GEV 모형의 적용성을 알아보기 위해 우리나라 연최대강우 자료에 적용한 결과, 위치 매개변수에 시간항을 고려하는 Gumbel 모형이 최적모형으로 가장 많이 선택되는 것으로 나타났다. 따라서 현재 우리나라의 연최대강우자료 중 경향성이 나타나는 자료에 대해서는 위치 매개변수가 시간에 따라 변하는 특성이 가장 많이 나타나고 있는 것으로 판단된다.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.509-515
• /
• 2022

To comparison of the differences in affecting factors of prevalence of obesity and hypertension according to the employment type of single-person households, aged 20 to 59 years old people were classified by permanent and temporary workers(n=566). A questionnaire survey was conducted by purposive quota sampling to ask disease, income and health habits. In the results of logistic regression on hypertension and obesity, the prevalence of hypertension was significantly affected as age and obesity increased regardless of employment type. In particular, temporary workers with lower income were more likely to have hypertension(p<0.001). The prevalence of obesity was significantly lower for female than for male regardless of employment type. In particular, temporary workers had a higher prevalence of obesity as their dinner fidelity decreased(p<0.001). As a result, chronic disease management for single-person households with lower income and dinner fidelity should be intervened in more useful ways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.665-675
• /
• 2008

The objective of this paper is to provide an approximate cost estimating model for tunnel that can be utilized both in quick construction cost estimating for design alternatives, and in evaluating efficiently the cost effects according to the environmental changes during design and construction stage. To meet this requirement, this study analyzes critical cost factors influencing tunnel construction costs. The cost factors include 7 elements such as rock drilling method, advancing method, type of detonator, loader capacity, unit weight and soil volume change factor, length of tunnel. This paper investigates the cost variance according to the change of the cost factors. The result is expected to be used in formulating approximate tunnel cost estimating model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.677-684
• /
• 2008

The paper provides an approximate cost estimating model that can be used for tunnel. Based on the previous study analyzed critical factors that have impact on tunnel construction cost, this paper establishes a cost variance index table that reflects the cost impacts due to the change of the critical cost factors. An estimating procedure is described utilizing the index table. For the verification of the suggested model, the comparison of the estimated construction cost with real project cost is performed. The estimated results range from 95%~111% of the real project costs. As an approximate tunnel cost estimating model, the model can be utilized to quickly estimate tunnel construction costs based on the conceptual information at the planning stage and to efficiently make a decision on design alternatives.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.350-360
• /
• 2008

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity is widely used in determination of rock quality in support pattern design of road and railway tunnel construction sites. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test in laboratory, such as P wave velocity, Young's modulus, uniaxial compressive strength (UCS) and electrical resistivity. We correlate each test results and we found out that electrical resistivity has highly related to P wave velocity, Young's modulus and UCS. Next, we accomplished electrical resistivity survey in field site and carried out electrical resistivity logging at in-situ area. We also performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to RMR data. We found out that electrical resistivity logging data are highly correlate to RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RMR.

• Korean Journal of Poultry Science
• /
• v.13 no.1
• /
• pp.31-40
• /
• 1986

The energy metabolism with the normal laying hen and progesterone injected non-laying hen are compared. 1. The FHP of 109.7Kcal for laying hen was 25.5 percent higher than the 87.4 Kcal found for non-laying hen. 2. The MEm's of laying hen and non-laying hen were 149, and 135Kcal/Kg$\^$0.75/day and NAME's of the diets were 77 and 83 percent, respectively. For the laying hen shown negative retention in body energy during the experiment, the 77 percent NAME was the value of supporting egg production. For the non-laying hen shown the positive retention in body energy and zero egg production, the 83 percent NAME was of growth. 3. A change in body weight of 1g was comparable to 3.54 Kcal for laying hen, and 5.0 Kcal for non-laying hen, when calculated on regression equations between body weight change and body energy retention(BE). The figures indicate that the tissue energy is used with an efficiency of 70 percent for egg production. 4. Plasma level of triiodothyronine(T3) for the laying hen is appeared to be higher than that of non-laying hen, although the levels of thyroxine (T4) are equal both in laying and non-laying hen. 5. Activities of four hepatic enzymes(ATP citrate lyase, fructose diphosphate aldolase, isocitrate dehydrogenase and glutamte pyruvic transaminase) were significantly greater in the laying hen than in the non-laying hen.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.383-392
• /
• 2006

This study was conducted to investigate the effects of a supplemented mixture of herbs (artemisia, eucommia ulmoids and houttuynia cordata) on the growth performance, nutrient utilization, blood characteristics, microflora population and diarrhea frequency in weanling pigs. Eighty-four pigs were randomly allotted into one of the four dietary treatments, each of which had 3 replicates. Experimental diets were prepared by adding (0.0, 0.5, 1.0 and 2.0%) a mixture of artemisia, eucommia ulmoids and houttuynia cordata to a commercial feed, and were given to pigs for 42 days. Daily feed intake was significantly increased in the groups supplemented with the mixture at 1.0% group and 2.0% group. Digestibility was significantly increased in 1.0% for protein and ether extract, and in 1.0% group and 2.0% group for NFE. Total bacillus and lactobacillus sp. were significantly (p<0.05) improved in 1.0% group and 2.0% group, respectively. Glucose concentrations of serum increased significantly (p<0.05) in 0.5% group and 1.0% group, and HDL increased significantly (p<0.05) in 1.0% group and 2.0% group. Diarrhea decreased by treatments except control (p<0.05). It is concluded that pigs fed the diet supplemented with 1.0% mixture of herbs can improve daily body weight gain, feed efficiency, nutrient utilizations and diarrhea frequency in pigs.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2002

Capacitively-coupled resistivity (CCR) system is known to be very useful where galvanic contact to earth is impossible, such as the area covered with thick ice, snow, concrete or asphalt. This system injects current non-galvanically, i.e., capacitively to earth through line antenna and measures potential difference in a same manner. We derived geometric factor for two types of antenna configuration and presented the method of processing and converting the data obtained with CCR system suitable to conventional resistivity inversion analysis. The CCR system, however, has limitations on use at conductive area or electrically noisy area since it is very difficult to inject sufficient current to earth with this system as with conventional resistivity system. This causes low SM ratio when acquiring data with CCR system and great care must be taken in acquiring data with this system. Additionally the uniform contact between line antennas and earth is also crucial factor to obtain good S/N ratio data. The CCR method, however, enables one to perform continuous profiling over a survey line by dragging entire system and thus will be useful in rapid investigation of conductivity distribution in shallow subsurface.