• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.163-168
• /
• 2011

In this paper, we proposed non-linear gamma curve algorithm for gamma correction. The previous non-linear gamma curve algorithm is generated by the least square polynomial using the Gauss-Jordan inverse matrix. However, the previous algorithm has some weak points. When calculating coefficients using inverse matrix of higher degree, occurred truncation errors. Also, only if input sample points are existed regular interval on 10-bit scale, the least square polynomial is accurately works. To compensate weak-points, we calculated accurate coefficients of polynomial using eigenvalue and orthogonal value of mat11x from singular value decomposition (SVD) and QR decomposition of vandemond matrix. Also, we used input data part segmentation, then we performed polynomial curve fitting and merged curve fitting results. When compared the previous method and proposed method using the mean square error (MSE) and the standard deviation (STD), the proposed segmented polynomial curve fitting is highly accuracy that MSE under the least significant bit (LSB) error range is approximately $10^{-9}$ and STD is about $10^{-5}$.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.22-31
• /
• 2013

In this paper, we propose a method that estimates the channel response from underwater communication signals with MMSE (Minimun Mean Squared Error) and detects dominant components automatically based on power of response components using CFAR (Constant False Alarm Rate). Statistical characteristics are analyzed with variation of magnitude and phase and time coherence via experimental data obtained by drifting transmitter and receiver. We show that bit error rate has small difference, 1.2 times, compared with the case using every channel information estimated within data period when estimation and equalization is performed with extracted characteristic obtained by the proposed method.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.163-174
• /
• 2008

The H.264/AVC provides gains in compression efficiency of up to 50% over a wide range of bit rates and video resolutions compared to previous standards. However, to achieve such high coding efficiency, the complexity of H.264/AVC encoder is also increased drastically than previous ones, mainly because of mode decision. In this paper, we propose a three-step mode decision algorithm for fast encoding in H.264/AVC. In the first step, we select skip mode or inter mode by considering the temporal correlation and spatial correlation. In the second step, if the result of the first step is INTER mode, we select one group between two groups for final mode. In the third step, we select final mode by exploiting the pixel values of error macroblock or the modes of adjacent macroblocks. Simulations show that the proposed method reduces the encoding time by 42% on average without any significant PSNR losses.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.372-378
• /
• 2010

This paper propose the fast motion estimation algorithm with adaptive search range adjustment using motion activities of temporal and spatial neighbor blocks. The existing fast motion estimation algorithms with adaptive search range adjustment use the maximum motion vector of all blocks in the reference frame. So these algorithms may not control a optimum search range for slow moving block in current frame. The proposed algorithm use the maximum motion vector of neighbor blocks in the reference frame to control a optimum search range for slow moving block. So the proposed algorithm can reduce computation time for motion estimation. The experiment results show that the proposed algorithm can reduce the number of search points about 15% more than Simple Dynamic Search Range(SDSR) algorithm while maintaining almost the same bit-rate and motion estimation error.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.342-348
• /
• 2015

High speed implementation of digital filters is required in high data rate applications such as hard-wired wide band modem and high resolution video codec. Since the critical path of the digital filter is the MAC (multiplication and accumulation) circuit, the filter coefficient with sparse non-zero bits enables high speed implementation with adders of low hardware cost. Compressive sensing has been reported to be very successful in sparse representation and sparse signal recovery. In this paper a filter design method for digital FIR filters with CSD (canonic signed digit) coefficients using compressive sensing technique is proposed. The sparse non-zero signed bits are selected in the greedy fashion while pruning the mistakenly selected digits. A few design examples show that the proposed method can be utilized for designing sparse CSD coefficient digital FIR filters approximating the desired frequency response.

• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.115-122
• /
• 1997

In this paper, on-chp atomatic tuning circuit, using proposed integration level approximation technique, is designed to tuning of the variation of RC time-constant due to aging or temperature variation, etc. This circuit reduces the error, the difference between code values and real outputs of integrator, which is drawback of presented dual-slope tuning circuit and eliminates modulations of processing signals in integrated circuit due to fixed tuning codes during ordinary operation. This system is made up of simple integrator, A/D converter and digital control circuit and all capacitors are replaced by programed capacitor arrays in this system. This tuning circuit with 4 bit resolution achieves $-9.74{\sim}+9.68%$ of RC time constant error for 50% resistance variation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.110-120
• /
• 2003

In this paper, we propose a Multiresolution Motion Estimation(MRME) adapted to Low-Band-Shift(LBS) method in wavelet domain. To overcome shift-variant property on wavelet coefficients, the LBS was previously proposed. This method which is applied to reference frame in video coding technique, has superior performance in terms of rate-distortion characteristic. However, this method needs more memory and computational complexity. In this paper, The computational complexity of the proposed method(LBS-MRME) is about 15.6% of that of existing method at 3-level wavelet transform. And although it has about 7 times as much as existing method's motion vector since each subband has different motion vector, it decreases motion compensated prediction error by detailed motion estimation, and then has better efficient coding performance. The experimental results with the proposed method showed about 0.3∼11.6% improvement of MAD performance in case of lossless coding, and 0.3∼3.0㏈ improvement of PSNR performance at the same bit rate in case of lossy coding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1093-1103
• /
• 2009

In this paper, we propose a new depth map based distributed multi-view video coding algorithm through an efficient side information generation. A distributed video coding scheme corrects errors between an original image and side information generated at a decoder by using channel coding techniques. Therefore, the more accurate side information is generated, the better performance of distributed video coding scheme is achieved. In the proposed algorithm, a distributed video coding scheme is applied to multi-view video coding based on depth map. Side information is also generated from images of adjacent views through 3D warping by using a depth map and is also combined with MCTI(motion compensated temporal interpolation) which uses images on a temporal axis, and 3D warping. Experimental results show that side information generated by using the proposed algorithm has 0.97dB better average PSNR compared with using MCTI and 3D warping separated. In addition, 8.01% of average bit-rate has been decreased while the same PSNR in R-D curves is kept.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.533-540
• /
• 2004

This paper proposes a new multispectral image data compression algorithm that can efficiently reduce spatial and spectral redundancies by applying classified prediction, a Karhunen-Loeve transform (KLT), and the three-dimensional set partitioning in hierarchical trees (3-D SPIHT) algorithm in the wavelet transform (WT) domain. The classification is performed in the WT domain to exploit the interband classified dependency, while the resulting class information is used for the interband prediction. The residual image data on the prediction errors between the original image data and the predicted image data is decorrelated by a KLT. Finally, the 3-D SPIHT algorithm is used to encode the transformed coefficients listed in a descending order spatially and spectrally as a result of the WT and KLT. Simulation results showed that the reconstructed images after using the proposed algorithm exhibited a better quality and higher compression ratio than those using conventional algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.106-115
• /
• 2003

Diverse multimedia services will be deployed at hand on 3G-and-beyond multi-service CDMA systems in order to satisfy different quality of service (QoS) according to traffic types. In order to use appropriate resources efficiently the call admission control (CAC) as a major resource control mechanism needs to be used to take care of efficient utilization of limited resources. In this paper, we propose a QoS-aware CAC (QCAC) that is enabled to provide service fairness and service differentiation in accordance with priority order and that applies the different thresholds in received power considering different QoS requirements such as different bit error rates (BER) when adopting total received power as the ceil load estimation. The proposed QCAC calculates the different thresholds of the different traffic types based on different required BER applies it for admission policy, and can get service fairness and differentiation in terms of call dropping probability as a main performance metric. The QCAC is aware of the QoS requirement per traffic type and allows admission discrimination according to traffic types in order to minimize the probability of QoS violation. Also the CAC needs to consider the resource allocation schemes such as complete sharing (CS), complete partitioning (CP), and priority sharing(PS) in order to provide fairness and service differentiation among traffic types. Among them, PS is closely related with the proposed QCAC having differently calculated threshold per each traffic type according to traffic priority orders.