• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.34-37
• /
• 2009

Deforming mesh should be used when bodies are deforming or moving relative to each other due to the presence of aerodynamic forces and moments. Also, the flow solver for such a flow problem should satisfy the geometric conservation law to ensure the accuracy of the solutions. In this paper, a RANS(Reynolds Averaged Navier-Stokes) solver including automatic mesh capability using TFI(Transfinite Interpolation) method and GCL is developed and applied to flows induced by oscillating wings with given frequencies. The computations are performed both on deforming meshes and on rigid meshes. The computational results are compared with experimental data, which shows a good agreement.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.37-45
• /
• 2010

Deforming mesh should be used when bodies are deforming or moving relative to each other due to the presence of aerodynamic forces and moments. Also, the flow solver for such a flow problem should satisfy the geometric conservation law to ensure the accuracy of the solutions. In this paper, a RANS(Reynolds Averaged Navier-Stokes) solver including automatic mesh capability using TFI(Transfinite Interpolation) method and GCL is developed and applied to flows induced by oscillating wings with given frequencies. The computations are performed both on deforming meshes and on rigid meshes. The computational results are compared with experimental data, which shows a good agreement.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.241-248
• /
• 2010

This paper deals with the performance analysis and design of the Darrieus-type vertical axis turbine to evaluate the effect of key design parameters such as number of blade, blade chord, pitch and camber. The commercial CFD software FLUENT was employed as an unsteady Reynolds-Averaged Navier-Stokes (RANS) solver with k-e turbulent model. Grid system was modelled by GAMBIT. Basic numerical methodology of the present study is appeared in Jung et al. (2009). Two-dimensional analysis was mostly adopted to avoid the barrier of massive calculation required for parametric study. It was found that the highly efficient turbine model could be designed through the optimization of design parametrrs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.999-1007
• /
• 2013

The present work reports numerical results of the pressure drop and heat transfer characteristics of pipes with various shapes such as circular, elliptical, circumferential wavy and twisted using a three-dimensional simulation. Numerical simulations are calculated for laminar to turbulent flows. The fully developed flow in pipes was modeled using steady incompressible Reynolds-averaged Navier-Stokes (RANS) equations. The friction and Colburn factor of each pipe are compared with those of a circular tube. The overall flow and heat transfer calculations are evaluated by the volume and area goodness factor. Finally, the objective of the investigation is to find a pipe shape that decreases the pressure loss and increases the heat transfer coefficient.

• Journal of computational fluids engineering
• /
• v.9 no.4
• /
• pp.48-54
• /
• 2004

Vortex-shedding flows past a circular cylinder for 200≤ Re ≤ 5000 are numerically simulated with the PowerCFD code, using a finite volume method and an unstructured grid system, developed by the author. The simulation is peformed by solving the unsteady 2-D Wavier-Stokes equations with both no model and turbulence model. The resulting Reynolds number dependence of the Strouhal number and of the drag and lift coefficients is compared with both experiments and previous numerical results. It is found that, in the range of 200≤ Re ≤ 5000 the calculation method with a turbulence model is capable of producing reasonably more accurate results than that with no model for the main practically relevant parameters such as Strouhal number, drag and lift coefficients.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.169-173
• /
• 2011

본 연구에서는 RANS를 지배방정식으로 하는 3차원 수치모의를 통해 댐 붕괴로 인한 3차원적인 흐름 특징이 지배하는 댐 직하류에서 고립된 장애물로 인한 댐 붕괴파의 전파현상과 이동상 수로에서의 붕괴파의 전파현상, 특히 붕괴파의 비정상성과 불연속성, 붕괴파와 반사파의 영향, 상류 및 사류의 흐름의 혼재와 같은 복잡한 현상을 포함하는 붕괴파의 전파를 해석하였다. 장애물로 인한 댐 붕괴파의 전파 해석 결과, 댐의 순간적인 붕괴로 인해 붕괴파가 형성되고 붕괴파가 장애물에 부딪치면 반사파가 발생하며 이는 다시 수로에 부딪치며 반사되는 과정에서 사류와 상류 및 도수현상이 발생하는 복잡한 흐름 양상을 보인다. 이동상 수로에서의 댐붕괴파 해석 결과 붕괴파 전파는 고정상 수로에서의 붕괴파 전파에 비해 그 전파속도가 느리게 형성되었다. 기존 수리실험 결과와 비교 하였을 때 본 모의결과는 국부적인 수면진동의 모의에서 다소 오차가 발생하고 있으나 대체로 그 경향성은 잘 추적하고 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.100-102
• /
• 2023

항로추종성능은 자율운항선박(MASS)의 중요한 자율제어기능 중 하나이다. 이는 선박의 안전성을 보장하기 위해 중요하며, 자율운항선박의 설계 단계에서 사전 평가가 필수적이다. 본 연구는 자율운항선박의 항로추종성능 평가를 위한 전산유체역학(CFD) 모델과 LOS 알고리즘 연계 방안을 제안한다. 먼저, 자율운항선박의 정수 중 거리 이탈 편차를 이용한 항로 추종 성능 평가 모델 개발에 관하여 기술했다. 먼저, 항로 추종을 수행하는 선박 주변의 난류 흐름은 비압축성 뉴턴 유체의 가정하에 비정상 RANS(Reynolds Averaged Navier-Stokes) 법을 이용하여 수치적으로 계산되었다. 중첩격자계법을 CFD 모델에 적용함으로써 거리 이탈 편차를 이용하는 LOS(Line-of-Sight) 가이던스 알고리즘에 의한 타의 회전 및 이에 따른 선체의 6 자유도 움직임을 CFD 환경에서 구현하였다. 개발된 자유 항주 선박 CFD 모델을 이용하여 항로 추종 시뮬레이션 평가 결과, 설정된 항로에서 선박의 정수 중 항로 추종 제어는 파도, 조류, 및 바람과 같은 외부 교란의 부재로 LOS 알고리즘에 의한 우현/좌현 측 변침뿐만 아니라 직진 경로의 추종도 성공적으로 수행됨을 확인하였다. 선체, 프로펠러, 타의 복잡한 상호작용을 정도 높게 해석할 수 있는 자유 항주 선박 CFD 모델과 LOS 알고리즘의 결합은 자율운항선박의 항로 추종 성능 평가를 정량적으로 평가하는 데 기여할 것으로 기대된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.114-120
• /
• 2011

The characteristics of a helical turbine to be used for tidal stream energy conversion have been numerically studied with varying a few design parameters. The helical turbines were proposed aiming at mitgating the well known poor cut-in characteristics and the structural vibration caused by the fluctuating torque, and the basic concept is introducing some twisting angle of the vertical blade along the rotation axis of the turbine. Among many potential controling parameters, we focused, in this paper, on the twisting angle and the height to diameter ratio of the turbine, and, based on the numerical experiment, We tried to propose a configuration of such turbine for which better performance can be expected. The three-dimensional unsteady RANS equations were solved by using the commercial CFD software, FLUENT with k-${\omega}$ SST turbulence model, and the grid was generated by GAMBIT. It is shown that there are a range of the twisting angle producing better efficiency with less vibration and the minimum height to diameter ratio above which the efficiency does not improve considerably.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.250-261
• /
• 2023

In this study, the noise contributions by the duct, stator and rotor, which are the propulsor components, are evaluated to identify the flow noise source in cavitation and non-cavitation conditions on pumpjet propulsion and the noise levels in both conditions are compared. The unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equation based on the homogeneous mixture assumption is applied on the suboff submarine hull and pumpjet propeller in the cavitation tunnel, and the Volume of Fluid (VOF) method and Schnerr-Sauer cavitation model are used to describe the two-phase flow. Based on the flow simulation results, the acoustic analogy formulated by Ffowcs Williams and Hawkings (FW-H) equation is applied to predict the underwater radiated noise. The noise contributions are evaluated by using the three types of impermeable integral surface on the duct, stator and rotor, and the two types of permeable integral surface surrounding the propulsor. As a result of noise prediction, the contribution by the stator is insignificant, but it affects the generation of flow noise source due to flow separation in the duct and rotor, and the noise is predominantly radiated into the upward and right where the flow separations are. Also, the noise is radiated into the thrust direction due to pressure fluctuation between suction and pressure sides on the rotor blades, and the it can be seen that the cavitation effect into the noise can be considered through the permeable integral surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.333-341
• /
• 2011

This study analyzed the propagation of dam-break waves in an area directly downstream of a dam by using 3D numerical modeling with RANS as the governing equation. In this area, the flow of the waves has three dimensional characteristics due to the instantaneous dam break. In particular, the dam-break flows are characterized by a highly unsteady and discontinuous flow, a mixture of the sharp flood waves and their reflected waves, a mixture of subcritical and supercritical flow, and propagation in a dry and movable bed. 2D numerical modeling, in which the governing equation is the shallow water equation, was regarded as restricted in terms of dealing with the sharp fluctuation of the water level at the dam-breaking point and water level vibration at the reservoir. However, in this 30 analysis of flood wave propagation due to partial dam breaking and dam-break in channels with $90^{\circ}$ bend, those phenomena were properly simulated. In addition, the flood wave and bed profiles in a movable bed with a flat/upward/downward bed step, which represents channel aggradation or degradation, was also successfully simulated.