• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.9-18
• /
• 2016

The slender structures such as high rise building or marine riser are highly susceptible to dynamic force exerted by fluid-structure interactions among which vortex-induced vibration(VIV) is the main cause of dynamic unstability of the structural system. If VIV occurs in natural frequency regime of the structure, fatigue failure likely happens by so-called lock-in phenomenon. This study presents the numerical analysis of dynamic behavior of both structure and fluid in the lock-in regimes and investigates the subjacent phenomena to hold the resonance frequency in spite of the change of flow condition. Unsteady and laminar flow was considered for a two-dimensional circular cylinder which was assumed to move freely in 1 degree of freedom in the direction orthogonal to the uniform inflow. Fluid-structure interaction was implemented by solving both unsteady flow and dynamic motion of the structure sequentially in each time step where the fluid domain was remeshed considering the movement of the body. The results show reasonable agreements with previous studies and reveal characteristic features of the lock-in phenomena. Not only the lift force but also drag force are drastically increasing during the lock-in regime, the vertical displacement of the cylinder reaches up to 20% of the diameter of the cylinder. The correlation analysis between lift and vertical displacement clearly show the dramatic change of the phase difference from in-phase to out-of-phase when the cylinder experiences lock-in. From the results, it can be postulated that the change of phase difference and flow condition is responsible for the resonating behavior of the structure during lock-in.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.977-982
• /
• 2011

The horizontal force acting on a work roll was examined. This force results from the contact force between the work roll and backup roll in a backup-roll-drive 4-high cold-rolling mill. This horizontal force bends the work roll horizontally and therefore exerts reciprocal action on the roll-gap contour. An analytical model for predicting the horizontal force acting on a work roll, which generates a mean value in the steady state, was presented. The material used for the analysis was high-silicon steel (about 3% Si). A three-dimensional finite element (FE) model was also employed to investigate the non-steady-state behavior of the horizontal force. Results showed that the horizontal force varied with the off-center distance between the work roll and backup roll. In addition, the optimal off-center distance was determined to minimize the horizontal force.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.194-202
• /
• 2021

Ionosphere, one of the largest error sources, can pose potentially harmful threat to single-frequency GNSS (global navigation satellite system) user even after applying ionospheric corrections to their GNSS measurements. To quantitatively assess ionospheric impacts on the satellite navigation-based applications using simulation, the standard deviation of residual ionospheric errors is needed. Thus, in this paper, we determine conservative statistical quantity that covers typical residual ionospheric errors for nominal days. Extensive data-processing computes TEC (total electron content) estimates from GNSS measurements collected from the Korean reference station networks. We use Klobuchar model as a correction to calculate residual ionospheric errors from TEC (total electron content) estimate. Finally, an exponential delay model for residual ionospheric errors is presented as a function of local time and satellite elevation angle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.267-274
• /
• 2012

The conventional approach to evaluate the contaminant transport in soils adopts the macro-scale implementation while the pore configuration and network is a dominant factor to determine the fate of contaminant. However, the observation of fate and transport at pore scale may not be readily approachable because of the computational expenses to solve Navier-Stokes equation. We herein present the 2D Lattice-Boltzmann method that enables to assess the local fluid velocity and density efficiently for the case of single phase and multi-components. The solute fate spatio-temperal space is explicitly determined by the advection of fluid flow. Two different types of idealized pore space provides the path of fluid. Also, solute transport, the velocity field and average concentration of solute are computed in steady state. Results show that the pore geometry such as tortuosity mainly affect the solute fate. It highlights the significance of the pore configuration and shape in granular soils and rock discontinuity in spite of the equivalent porosity.

• Composites Research
• /
• v.16 no.3
• /
• pp.32-40
• /
• 2003

In recent years, the investigation on the development of fiber reinforced plastic(FRP) Re-Bar has been greatly increased due to the attractive physical and mechanical properties of FRP. The primary reason of such a tendency is in the fact that it does not ordinarily cause durability problems such as those associated with steel reinforcement corrosion. This study is an experimental investigation on the flexural behavior of one-way concrete slabs, which can be used to construct bridge deck, reinforced with GFRP Re-Bar bundle. The tensile tests of GFRP Re-Bar produced by domestic industry and third point bending tests of one-way slab specimens reinforced with GFRP Re-Bar bundle are peformed. For all slab specimens, load-deflection relations are predicted by using the ACI committee 440 and the results are compared with experimental ones. In order to establish the design criteria or guidelines of concrete flexural member reinforced with FRP Re-Bar, it is needed to evaluate the serviceability limit state as well as the strength limit state.

• Journal of the Korean Magnetics Society
• /
• v.6 no.3
• /
• pp.158-164
• /
• 1996

The magnetic and magneto-optical properties of the Tb/Co multilayers as a function of the layer thickness and the ratio of Tb/Co thicknesses were studied. When the thickness of Tb layer was $12{\AA}$, the maximum perpendicular anisotropy energy and the maximum thickness ratio which displays the perpendicular anisotropy were obtained. This result indicated that the Tb-Tb and Co-Co pairs as well as the Tb-Co pairs contribute to the perpendicular anisotropy. The Kerr rotation angle, $({\theta}_k)$ was proportional to the perpendicular anisotropy energy and was inversely proportional to the average spin dispersion angle, $(\alpha)$. The maximum $({\theta}_k)$ of $0.28^{\circ}$ was obtained in the film of $12{\AA}$ Tb and the thickness ratio of 1.55. The abnormal hysteresis loops were appeared during the aging treatment because the coercivity difference between the Co layer and the Tb layer was increased by the preferential oxidation of Tb.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5C
• /
• pp.303-312
• /
• 2006

This study is to evaluate the mechanical characteristics of flowable backfill and offer a guide line of mixture proportion based on soil types for constructing underground power utilities. Flowable backfill is known as soil-cement slurry, void fill, and controlled low-strength material(CLSM). The benefits of CLSM are reduced equipment costs, faster construction, re-excavation in the future, and the ability to place materials in confined spaces, which are narrow parts or perimeters of underground power cables nearly impossible for compaction. The flowable slurry mixed with 17 soils and 6 accelerated mixtures in the laboratory were evaluated for flowability and unconfined compressive strength to meet the target values of this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2220-2224
• /
• 2009

하천의 수질모의를 위해서는 정상상태 모델인 QUAL2E 가 널리 사용되어 왔다. 그러나 우리나라는 기후 특성상 하절기에 강우가 집중되고 경우에 따라서는 댐등에 의해 장기간 수류의 지체현상이 발생하므로 지역 및 시기에 따라 발생하는 수질 문제가 서로 다를 수 있다. 따라서 우리나라의 대부분의 수체에서는 시간에 따라 모의를 할 수 있는 비정상 상태의 수질모델이 적용되어야 할 필요가 종종 발생한다. 미국공병단에서 개발된 CE-QUAL-W2 모델은 2차원 모델로서 수리동역학과 수질반응역학을 한데 묶어서 풀이하였다는 점에서 획기적인 변화로 볼 수 있다. 이 모델은 종방향으로 길고 수심이 깊으며 상대적으로 하폭이 좁은 형태의 수체에 적합하며 하폭방향의 수질 변화를 나타내는 데 사용되지 못하는 단점이 있다. WASP(Water Quality Analysis and Simulation Program) 은 미국 환경부에서 개발한 비정상상태 3차원 수질모델로서 세계적으로 다양한 수체에 널리 사용되어 왔다. 이 모델에서 1차원적 흐름을 예측할 수 있는 DYNHYD 라는 수리학적 부프로그램은 2차원 또는 3차원 상황에서는 사용할 수가 없었음에 따라 수리학적 고려가 빈약한 것이 이 모델의 가장 큰 약점으로 지적되어 왔다. 최근 미국 환경부는 EFDC(Environmental Fluid Dynamics Code) 라는 3차원 수리동역학 프로그램을 이용하여 대상 수체의 수리학적 거동을 모의하고 그 결과를 WASP7 에 연계시킬 수 있도록 하여 기존의 단점을 대폭 보완하였다. 본 연구에서는 금강 상류에 위치하고 있는 용담호를 대상으로 EFDC 를 이용하여 2005년 1년간 수위 및 수온성층현상을 예측하고 그 결과가 WASP 에 연결되어 사용될 수 있도록 하였다. 적절한 격자의 수를 결정하기 위하여 다양한 경우가 시행착오적으로 시험되었으며 비교적 적은 숫자의 격자로도 수위 및 수온의 모의가 가능하다는 것을 발견하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.194-197
• /
• 2005

Pulse-mode performance evaluation is made for a set of monopropellant hydrazine thrusters producing $0.95 lb_{f}$ of nominal steady-state thrust at an inlet pressure of 350 psia. With a brief description on the hot-firing test matrix, a typical data obtained from pulse-mode firing is given directly showing the variational behavior of propellant supply pressure, vacuum condition, and thrust, in addition to the thermal response of the thruster. The performance features are successfully compared to the reference criteria of 1-lbf standard monopropellant rocket engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.522-525
• /
• 2008

최근 세라믹 막은 우수한 화학적, 열적 안정성으로 기체 분리 공정에 각광을 받아 왔다. 특히 혼합기체에서 고 순도의 수소를 분리해 내는 기술은 연료전지 공정에서 화학 에너지를 전기화학 에너지로 전환시키는데 중요한 역할을 차지한다. 본 연구에서는MTES 템플레이팅 막을 이용하여 이 막 공정의 흡착 및 투과 특성을 규명하고, 이성분 혼합기체에서 고 순도의 수소를 추출해 낼 수 있는 최적 조건을 도출해 내었다. 또한, 기체 분리 거동을 살펴보기 위해 Gproms Dynamic Simulator를 이용하였으며, 이때 기체상의 물질전달을 모사하기 위해 Dust Gas Model(DGM)을, 표면 확산 거동을 모사하기 위해 Generalized Stefan-Maxwell(GSM)식을 적용하였다. 이를 통해 평형론적 흡착 뿐 아니라 속도론적 흡착을 동시에 적용할 수 있게 하였다. MTES 템플레이팅 막의 흡착 및 분리능을 규명하기 위해 본 연구에서는 혼합기체의 투과, 분리 실험이 선행되었다. 실험 조건은 온도범위 323$\sim$473 K, 압력범위 0$\sim$7 atm에서 수행되었으며, 혼합기체는2성분으로 수소-메탄, 수소-이산화탄소, 수소-질소로 기체의 구성비는 각각 50:50 이다. 본 연구를 통해 각 혼합 기체들이 정상상태에 도달하는 시간과 분리능을 계산해 내었으며, 이 분리능을 다시 온도와 압력에 따른 결과로 분석하여 어느 조건에서의 수소 분리도가 최고치를 보이는지를 규명했으며, 시뮬레이션과 비교,대조하여 예측도를 검사하였다.