• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.163-172
• /
• 2012

As more diesel engines have been employed in underground limestone mines with large cross section, underground space environment is worsened by diesel exhausts and heat flow. This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow, diesel exhaust gas concentrations and the effects of mechanization and deepening working face on temperature and humidity. Due to the insufficient capacity of the main exhaust fan and poor airway management, stagnant airflows were observed at various locations, while the flow direction was reversed instantly with passing diesel equipment and the flow reversal was also made by the seasonal variation of the outside surface weather. During the loading operation, CO concentration measurements were found to be frequently higher than the threshold limit of 50 ppm, and most of the $NO_2$ measurements during drilling and loading operations shows even more serious levels surpassing the permissible limit of 3 ppm. The actual ventilation quantity was considerably less than the required quantity estimated by the mine health and safety law, and this shortage problem was less serious in colder winter showing more effectiveness of the natural ventilation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.27-62
• /
• 1975

These studies were aimed at clarifying whether or not selecting agronomic characteristics of hybrid-rice populations under greenhouse conditions was useful. The selection of two quantitative characteristics, culm length and heading date, and two qualitative characteristics, shattering and awnedness, was very effective, but the flag leaf length and the exsertion of panicle was not consistent, varying from one cross to another.

• Journal of the Korean Professional Engineers Association
• /
• v.20 no.3
• /
• pp.15-25
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the X-chart, X-chart, X-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart X-chart, which is the most widely used one in Korea, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for tile more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the X-chart, the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the X-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based on a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $X^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the propose4 median chart and the X chart was also performed with these examples and the median chart turned out to be superior to the X-chart.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.67-75
• /
• 2014

In this study, the staged seismic performance evaluations were conducted to the 91 high speed railway tunnels in use for checking whether to comply with the recent design criteria or not. In addition, the seismic fragility functions of the tunnels were developed to allow the probabilistic risk assessment. The results of the staged seismic performance evaluations which consist of a preliminary assessment and a detailed assessment, show that the tunnels comply with the recent design criteria. With reference to the results of previous studies, a form of the proposed seismic fragility functions was set as a log-normal distribution by PGA, and the parameters of the functions were determined by using the probability of damage for the design PGA level. The seismic fragility functions were developed for each types (Cut & Cover, NATM) of tunnels. The seismic fragility functions from this study and the existing research results (FEMA, 2004) were compared to evaluate the seismic performance level of the tunnels, as a result the tunnels of this study were relatively superior to the ASSM tunnels on the seismic performance.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.69-79
• /
• 2008

Prediction of ground condition ahead of tunnel face might be the most important factor to prevent collapse during tunnel excavation. In this study, a non-destructive method to evaluate the phase velocity in model rock mass using wavelet transform of surface wave was proposed aiming at ground condition assessment ahead of tunnel face. Model tests using gypsum as a rocklike material composed of two layers were performed. A Piezoelectric actuator with frequencies ranging from 150 Hz to 5 kHz was selected as a harmonic source. The acceleration history was measured with two accelerometers. Wavelet transform analysis was used to obtain the dispersion curves from the measured data. The experimental results showed that the near-field effects can be neglected if the distance between two receivers is chosen to be three times the wavelength. A simple inversion method using weighted factor based on the normal distribution was proposed. The inversion results showed that the predicted phase velocity agreed reasonably well with the measured one when the wavelength influence factor was 0.2. The depth of propagation of surface wave was from 0.42 to 0.63 times the wavelength. The range of wavelength varying with phase velocity in dispersion curve matched well with that estimated by inversion technique.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.91-96
• /
• 2013

The purpose of this study was to examine the possibility of the existence of high-risk groups of dental caries and influential factors for the high-risk groups, as there was a possibility that certain people might especially be at risk of suffering from dental caries when decayed, missing, and filled teeth index were analyzed, which were the typical indicators of dental caries. The data of the 4th National Health & Nutrition Survey for 2007, 2008 and 2009 were analyzed. Significant caries index (SiC index) were calculated, which were one of the representative devices to indicate high-risk groups of dental caries, and the SiC index and related factors were analyzed by using $x^2$ (chi-square) test. Besides, logistic regression analysis was utilized to find out influential factors, and a statistical package STATA 11.0 was employed. As a result of analyzing what factors would be linked to high-risk groups of dental caries, it's found that women were more likely to belong to high-risk groups than men (p<0.01). How the related factors affected the high-risk groups was analyzed, and it's found that those who didn't find themselves to be in good oral health were more likely to be classified into a high-risk group, and that those who brushed their teeth three times a more a day on a regular basis were more likely to belong to a high-risk group than the others who didn't (p<0.01). Thus, SiC index were calculated in this study to confirm the existence of dental caries high-risk groups, and what factors impacted on the high-risk groups was ascertained. It's required to implement efficient national policies to step up the promotion of national oral health based on the findings of the study.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.119-142
• /
• 2005

The purpose of this study is to explore and describe of the reality of working poor in Korea. In spite of the increasing attention to the working poor, usual definitions of the working poor have some measurement questions. The definition of the working poor should focus on the key dimensions of work and poverty. This study defines working poor as all "persons who have devoted prior 6 months to working or looking for work and who lived in families with incomes below the poverty threshold". This study also defines poverty threshold based on the both concept of absolute and relative poverty. According to this definition, the working poor are almost equally divided between men and women and the majority of them are of prime working age. These characteristics of working poor are seems to be quite different from common sense. Also, serious deficiencies of human capital contribute to the employment problems of the working poor. Their education levels are much less than those of the working non-poor. The distributions of the employment status, occupation, and industry show also that the working poor are highly concentrated in a few low-wage jobs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.9-16
• /
• 1996

In order to understand microbial ecosystem in the fast china sea and Yosu coastal sea horizontal distributions of bacterial flora, Vibrio spp., coliform group, temperature, and salinity in this sea area, were studied 42 sampling stations during 6th-l4th August, 1992. From the results, salinity and temperature were $24.64\~33.78\%_{\circ}$ and $22.53\~29.18^{\circ}C$, respectively. As the open sea far from land goes on, salinity became low while temperature became high. Viable cell counts of bacteral flova, Vibrio spp., and roliform group in Yosu coastal sea water were $1.0\times10^2\~3.0\times10^4/ml,\;0.2\times10\~9.0\times10^3/ml,\;and\;0.3\times10\~3.0\times10^3/ml$ while those of these in the open sea water were $0.4\times10\~2.0\times10^3/ml,\;0.8\times10\~3.0\times10/ml,\;and\;0.9\times10\~1.3\times10/ml$, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.17-25
• /
• 1996

The results identified for bacterial flora 174, Vibrio spp.132, and coliform group 183 strains isolated from the areas of last China Sea and Yosu coastal sea during from August 6th. to 14th. 1992 were as follow: 40 strains among the 74 strains of bacteria flora isolated from fast China sea area were Pseudomonas spp.$(54\%)$ and 60 strains among the 100 strains isolated from Yosu sea area were Enterobacteriaceae $(60\%)$. Four strains were Vibrio alginoliticus and one strain of V, parahaemolyticus among 5 strains of genus Vibrio isolated from last China Sea. While 54 strains were V. alginolyticus $(43\%)$ and V, parahaemolyticus $(17\%)$ among 127 strains genus Vibrio isolated from Yosu coastal sea area. Seventy nine strains among the 156 strains of coliform group isolated from Vosu sea area were Escherichia coli I $(51\%)$ and each one strain Citrobacter freundii I and II. 3 strains among 27 strains isolated from last China sea area were E. coli$(11\%)$ and 1 strain of C. freundii I. Coliform group was grouped into 16 types by IMViC system, $44^{\circ}C$, gelatin liquefaction test.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.121-127
• /
• 2016

This study analyzed the structural and electrical characteristics of an iron fittings type Corrugated Stainless Steel Tubing (CSST) damaged by the Primary Current Injection Test System (PCITS). CSST consists of cladding, tube, nuts, clamp ring, flare cap, socket, and ball valve. For an evaluation of the dielectric withstand voltage, the area between the live part and non-live part of the CCST shall withstand a voltage of 220 V AC for one minute. For an evaluation of the insulation performance by 500 V DC, it is required that the insulation exceed more than $1M{\Omega}$ before the temperature rise test, $0.3M{\Omega}$ after the test. Although the average resistance of the product was $11.5m{\Omega}$, that of the product damaged at a current of 130 A by the PCITS was $11.50m{\Omega}$. Furthermore, parts of the cladding were melted and black smoke appeared when a current of 130 A applied for 10 s. After 60 s, most parts were heated and turned red. At 120 s, the parts that turned red had widened. Although it did not form a normal distribution because the P value was 0.019 with a confidential interval of 95%, it revealed outstanding characteristics with an AD (Anderson-Darling) value of 0.896 and a standard deviation of 0.5573.