• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.77-83
• /
• 2006

We have studied the astigmatism according to the bevel position and the tilting(pantoscopic) angle of decentered spectacle lens for prism prescription. For prism prescription, generally we make a general spectacle lens into decentered spectacle lens. At this time the bevel position of decentered lens is a important matter, because the difference between optic axis and visual axis occur aberrations. Using the calculation we find that the case that the axis of bevel rotation band passes the front curvature center of (+) lens has a smaller astigmatism than the case that the axis of bevel rotation band passes the rear curvature center of (+) lens and that the case that the axis of bevel rotation band passes the rear curvature center of (-) lens has a smaller astigmatism than the case that the axis of bevel rotation band passes the front curvature center of (-) lens. We find the lens with higher refraction index has a smaller astigmatism.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.4
• /
• pp.355-360
• /
• 2010

Purpose: Analysis performance for spectacle lens which sales in domestic market and optimization design a spectacle lens which is corrected aberration. Methods: Measured center thickness, radius and aspherical surface coefficient for spherical and aspherical lenses which were ${\pm}$5.00D. Refractive index for every lens was 1.6 and they came from 4 different companies. I used 3 types of equipment to measure lenses. ID-F150 (Mitutoyo) : Center Thickness, FOCOVISION (SR-2, Automation Robotics) : Radius, PGI 1240S (Taylor Hobson) : Aspherical surface coefficient. Designed a lens which had 27 mm of distance from lens rear surface to center of eye, 4 mm of pupil diameter and small aberration on center vision $30^{\circ}C$. To shorten axial distance compared with the measured lens rise merits for cosmetic. Lens Design tool was CODE V (Optical Research Associates). Results: -5.00D aspherical lens had somewhat high astigmatism and distortion compared with the spherical lens. But it had a merit for cosmetic because of short axial height and decrease edge thickness. Improved a performance of distortion and ascertain merits for cosmetic due to short axial height and decrease edge thickness same as (-) lens in case of +5.00 aspherical lens. Though an optimization process front surface aspherical lens had a good performance for astigmatism and distortion and the merit for beauty compared with measured spherical lens. Conclusions: Design trend for domestic aspherical lens is decrease axial height and thickness to increase a merit for cosmetic not but increase performance of aberration. From design theory for optimization design front surface aspherical spectacle lens which has improved performance of aberration and merit for cosmetic at the same time compared with the measured lens. Expect an improved performance from design back aspherical lens compared with front aspherical lens.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.212-213
• /
• 2001

본 논문에서는 마이크로디스플레이용 광학계의 렌즈 설계와 시뮬레이션으로 구면수차, 비점수차, 왜곡, 색수차를 보정하여 설계한 광학계의 성능 평가를 소개하고자 한다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.191-198
• /
• 1998

A method is described to produce off-axis hologram lenses without astigmatism for semiconductor lasers. We fabricated a holographic collimating lens by using dichromated gelatin film with high diffraction efficiency and without astigmatism which makes a collimated off-axis beam of semiconductor laser. We have designed the holographic collimating lens by applying the classical ray-tracing method to holographic diffraction. The elimination of astigmatism is obtained by choosing appropriate angles of recording and reconstruction beams. The hologram is recorded by use of Ar^{+}$ laser (488nm wavelength) and reconstructed by semiconductor laser(670nm wavelength). The physical parameters of recording and reconstruction angles, wavelength, and astigmatism are analytically calculated and experimentally confirmed.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.447-454
• /
• 2006

We obtained analytic solutions of boundary conditions to the stable region of Z-fold $Cr^{4+}$ : YAG laser cavity when the conditions are with and without thermal tensing effect. Also we investigated the influence of the thermal tensing effect on the stability of cavity, beam waist, and astigmatic compensation using aberration transformation matrices. The thermal tensing effect almost has no influence on the stable region of the cavity when the crystal is located in the middle of two concave mirrors and when the distances from the concave mirror to the reflecting mirror and the output coupler are the same. The beam waist, however, is affected more in a tangential plane than in a sagittal plane, and so it is difficult to have astigmatic compensation when the thermal tensing effect exists. This result means that the thermal tensing effect should be considered even for the Kerr-lens mode-locking.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.372-378
• /
• 1994

A simple 2-step astigmatic rainbow holography method using the characteristics of holographic aberration is proposed. Point sources are used to record and reconstruct primary hologram. When the primary hologram is reconstructed, object image is divided into two components by the holographic astigmatism. This characteristics of holographic astigmatism and cylindrical lens power are used to obtain rainbow hologram of sharp image, no matter how far from the hologram the obseved image locates, in front of the hologram. And this hologram has optimum viewing distance long enough.enough.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.121-128
• /
• 1998

In this paper, We researched the optical performance of eye by means of the Gullstrand EYE MODEL. And we also researched the glasses that are made by designing the eye glasses corrected with the Astigmatism and the optical performance of the glasses in the optical system which are compounded with eyes. This paper can be used as a reference material in designing the glasses for ametropic correction.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.248-260
• /
• 2023

A 0.5-numerical-aperture (NA) refractive-reflective objective, composed of a low-NA refractive and a reflective focal reducer, is designed. A 0.25-NA Lister objective is used for the refractive. A two-spherical-mirror system, corrected for spherical aberration, coma, and astigmatism is used for the reflective focal reducer. In spite of high NA, the refractive-reflective objective has an 18-mm working distance and improved imaging performance, compared to the 0.25-NA Lister objective.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.9-12
• /
• 2008

Purpose: Current gas-mask is very uncomfortable structure for spectacles wearer. Improving this problem can aid military men and firemen to protect themselves and rescue other person. Methods: we changed the structure from dual type of outward lens and inward lens into a single type structure. we attached acrylic frame to gas-mask instead of outward lens and protected the gas inflow by shutting the gab of lens and frame using silicon shield, and made the frame "S" style for removing astigmatism and maintaining of vertex distance. Results: It was possible to correct visual acuity and gas shield, and could changed the lens like a common spectacles. The new type of gas-mask spectacles could remove 0.53D~1.78D astigmatism occurred from the slant of eyesight and lens surface, 0.07D~0.66D overcorrection occurred from short vertex distance, and 0.1D~0.3D astigmatism occurred from pantoscopic angle. Conclusion: Because new type of gas-mask spectacles had clear visual field, it was expected to improve fighting power and rescue ability.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.41-48
• /
• 2009

Laser diode is used as a crucial part for minimization of terrestrial 3D Laser Scanner. But it has certain limitations such as oval beam shape and inevitable astigmatism. In order to realize a parallel light with beam divergence below 1 mrad, These problems of laser diode can be solved through beam shaping by Pinhole and Aperture. Finally, this study could materialize a collimated beam with 0.3 mrad beam divergence angle and 3mm diameter, that performance and checked by using real manufacture.