• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.411-418
• /
• 2005

Polymer-modified mortar and concrete are prepared by mixing either a polymer or monomer in a dispersed, or liquid form with fresh cement mortar and concrete mixtures, and subsequently curing, and if necessary, the monomer contained in the mortar or concrete is polymerized in situ. Although polymers and monomers in any form such as latexes, water-soluble polymers, liquid resins, and monomers are used in cement composites such as mortar and concrete, it is very important that both cement hydration and polymer phase formation proceed well the yield a monolithic matrix phase with a network structure in which the hydrated cement phase and polymer phase interpenetrate. In the polymer-modified mortar and concrete structures, aggregates are bound by such a co-matrix phase, resulting in the superior properties of polymer-modified mortar and concrete compared to conventional mortar and concrete. The purpose of this study is to obtain the necessary basic data to develope appropriate latexes as cement modifiers, and to clarify the effects of the monomer ratios and amount of emulsifier on the properties of the polymer-modified mortars using methyl methacrylate-butyl acrylate(MMA/BA) and methyl methacrylate-ethyl acrylate(MMA/EA) latexes. The results of this study are as follows, the water absorption, chloride ion penetration depth and carbonation depth of MMA/BA-modified mortar are lowest. However, they are greatly affected by the polymer-cement ratio rather than the bound MMA content and type of polymer.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.242-249
• /
• 1994

These studles were conducted to investigate the development of chem~cal resistance and cross.resista. nce m dlarnondback moth (Piuteiia xylostella L). The resistance development of diamondback moth greatly vaned under single selection of five insectlades. The tnflumuron and lambda cyhalothnn strains at 8th selected generation showed 374- and 29.l.fold resistant levels. respectively, as compared with the susceptible strain. However, the Baciilus thuringiensis-seleded at 8th selected generatLon exhibited 240-fold resistant level. and the prothiophos-selected at 8th generation revealed 14.3-fold resistant !eve1 while the cartap hydrochloride-selected at 8th generailon showed 9.1-fold resistant level Prothiophos- selected strain showed low cross-resistance level to cartap hydrochloride, while this strain exhibited no cross-resistance of 1.3 to 2.8-fold to other msectlcides. Cartap hydrochlonde- seleded strain showed 19.9-fold. a high cross-resistance to lambda cyhalothrin, but this strain showed 2.2-34 fold, no cross resistance to other insecticide. Lambda cyhalothnn-selected strain exhibited cross-resistance to cartap hydrochlolide and prothiophas. Triflumuron-seleded strain showed 1.3-4.9 fold. no cross-resistance to other ~nsectic~dTe he B. ihuring~ensis-selededs train showed no cross-resistance to other insecticides.

• 한국해양학회지
• /
• v.23 no.3
• /
• pp.146-157
• /
• 1988

Properties of porosity, compressional wave velocity, velocity anisotropy, electrical resistivity, and resistivity anisotropy are measured and calculated for two DSDP clay-rich hemipelagic sequences in the northwestern Pacific. Velocity and resistivity increase with burial depth at the expense of decreasing porosity. Profiles of velocity anisotropy and resistivity anisotropy show almost the same trend. Horizontally developed low aspect ratio pores may generate velocity and resistivity anisotropy. The preferred orientation of clay minerals is also believed to be responsible for the observed anisotropy.

• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.171-180
• /
• 2015

Electrical resistivity of 23 core samples from Ulleung Island at dry or saturated condition has been measured along with dry density and effective porosity, and the relations between the properties has also been discussed. Upper and lower bounds of electrical resistivity at room temperature can be provided by the dry- and saturated-resistivity, respectively. Injecting nitrogen gas to the pore space at the very end of drying process can prevent humid air from getting into the pore space, so that measurement of dry-resistivity can be less affected by humidity in the air. Dry density and porosity have very close correlation; the ratio between increase of porosity and the decrease of density showed distinct relation to the rock types, such that basaltic rocks showed higher ratio while trachytic rocks showed lower. Saturated resistivity showed close correlation to density and effective porosity of the rock sample, while dry resistivity didn't.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.164-171
• /
• 1995

열처리에 따른 Cu 박막의 미세구조 및 전기 비저항의 변화를 조사하였다. Cu(hfac)(TMVS)를 원료로 하는 저압화학증착법에 의해 증착온도를 $160^{\circ}C$에서 $330^{\circ}C$까지 변화시키면서 TiN기판 위에 Cuqkr막을 제조하였고 $450^{\circ}C$에서 30분간 열처리하였다. 증착온도에 따라 표면이 평평한 Cu 박막을 형성하는 표면반응 제한지역과 표면이 거친 Cu 박막을 형성하는 물질전달제한지역이 관찰되었다. 열처리 후 Cu 박막은 전체적으로 표면이 평탄해졌고 결정립의 크기는 모든 증착온도에서 증가하였는데 그 편차 역시 증가하여 EM 저항성 측면에서는 큰 효과를 보이지 못할 것으로 판단된다. 비저항은 증착온도 $200^{\circ}C$에서 급격히 증가하였고 열처리 후에는 모든 증착온도에서 비저항이 감소하였는데 표면반응제한지역에서는 결정립 성장에 의한 약간의 비저항 감소를 보였으나 물질전달제한지역에서는 응집에 의해 Cu 결정립간의 전기적 연결상태가 향상되어 급격한 비저항 감소를 보였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.552-556
• /
• 2003

창원시 대산면 갈전리의 강변여과수 취수지역의 8개의 시추공의 시추지료로부터 파악된 지하지질과 물리탐사자료를 비교하여 둘 간의 연관성을 검토하였다. 본 연구에서는 이미 얻어진 시추공 자료와 비교ㆍ검토하기 위하여 지구물리탐사를 실시하였다. 수행된 지구물리탐사는 쌍극자배열 전기비저항 수평탐사, 슐럼버져법배열 전기비저항 수직탐사, 지하투과레이다탐사이다. 전기비저항 수평탐사에 의하면 저비저항치의 두께는 낙동강변에 가까울수록 두꺼워지는 경향성을 보이고 있다. 전기비저항 수직탐사 결과는 시추자료와 비교적 잘 일치하고 있으며 지표로부터 세립질 모래층, 중립질 모래층, 세립질 모래층의 구분이 수직탐사 결과에서 잘 나타나고 있다. 또한 GPR탐사와 전기비저항 수직탐사 결과에 의하면, 지하수면은 6m 부근에 위치하고 있음을 알 수 있다.

• Korean Journal of Materials Research
• /
• v.6 no.10
• /
• pp.991-998
• /
• 1996

순도가 자기적 임계현상에 어떠한 영향을 주는가를 보기 위해 여러 순도의 니켈에서 비저항의 온도의존성을 관찰하였다. 비저항은 Lock-In 증폭기를 사용하여 교류저항측정법으로 측정하였으며 시료를 솔레노이드식으로 감아 저항부분과 인덕터부분의 신호를 함께 관찰할 수 있도록 하였다. 큐리온도는 이들 신호들이 갑작스럽게 변하는 온도로 결정하여UT으며 저항부분과 인덕터부분의 신호에서 결정한 큐리온도값들은 서로 잘 일치함을 볼 수 있었다. 비저항의 온도에 따른 일차미분에서 비열의 임계지수를 결정하였으며 큐리온도와 마찬가지로 임계지수의 순도의존성은 실험오차내에서는 없음이 관찰되었다.

• Journal of the Korean Magnetics Society
• /
• v.16 no.3
• /
• pp.173-177
• /
• 2006

We have investigated the magnetoresistance (MR) effect of the spin valve structures composed of perpendicularly magnetized Pd/Co multilayers, with changing the space layer (Pd or Cu) thickness, the stacking number of the Pd/Co multilayers, and the Co insertion-layer thickness. The Cu space layer showed larger MR ratio than the Pd space layer. The Co insertion-layer between Cu layer and pinned layer enhanced the MR ratio about three times. The maximum MR ratio of 7.4 % was established in the sample with the Co insertion-layer thickness of 0.62 and 1.01 nm.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.322-331
• /
• 2007

In this study, electrical resistivity tomography (ERT) were conducted to find the mineralized zone at the Geumpung mine in Dojeon-ri, Susan-myeon, Jecheon-si, Chungcheongbuk-do. The deviation of the inclined borehole was measured to obtain the exact positions of the electrodes for correcting apparent resistivity values from ERT. Geophysical loggings such as resistivity and natural gamma were conducted to obtain the properties of the material near the borehole. Measurements of the physical properties of the cores, such as porosity, water content, density, susceptibility, resistivity were performed to analyze the correlation between physical properties and resistivity. Grade analysis for core sample was also conducted to identify relationship between grade and resistivity. Rock property analysis shows that the resistivity is more dominated by susceptibility and grade than by porosity and water content in the mineralized zone. The results of ERT are well consistent with geophysical logging data and geologic column. So ERT is powerful method to identify conductive mineralized zone.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.269-276
• /
• 1999

As a part of trying to get the resistivity values correctly from laboratory core resistivity measurement, the effect of sample holders in resistivity measurement was analyzed and a better way to determine the representative resistivity value from the time series resistivity data was searched. Modified GS type and modified two-electrode type sample holders were devised and their effects have been compared with those of GS and two-electrode type sample holders. The modified two-electrode type sample holder has benefits both in repetition and simplicity in data acquisition. The analysis of distribution trend of the time series resistivity data obtained with different kind of sample holders and source frequencies shows that the maximum curvature point method gives the best result in determining representative resistivity value.