• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.130-137
• /
• 2017

To maintain traffic safety during the target lifetime of bridges, it is essential to secure an appropriate maintenance budget and allocate that budget appropriately. This paper proposes a reasonable budget allocation system that considers various impact factors to improve the conventional budget allocation method simply considering the bridge scale. The maintenance action rate model and the unit cost model based on the prior maintenance history were developed to allocate appropriately the bridge maintenance budget for the total bridges of the management organization with the target management level. A method to determine the optimal budget allocation ratio for each management subject was proposed and case analysis was conducted using the proposed model. Proper budget allocation was made considering the bridge types, current safety level, and service life as well as the bridge size as an impact factor of the budget allocation of the bridge. The developed method can prevent budget waste and provide a rational basis for budget allocation by implementing the rational budget distribution.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1315-1329
• /
• 2009

The panel survey is need to have a more concern about a response due to a secession and non-response of a sample. And generally a population is not fixed and continuously changed. Thus, the rotation sample design can be used by the method replacing the panel research. This paper is the study of comparison to equal weight method, Duncan weight, Design weight method, weight share method in rotation sample design. More specifically, this paper compared variance estimators about the existing each method for the efficiency comparison, and to compare the precision using the relative efficiency gain by the Coefficient Variance(CV) after getting the design weight from the actual data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.521-524
• /
• 2015

This letter presents a selective wireless power transfer architecture using a reconfigurable multi-port amplifier. The proposed wireless power transfer architecture is composed of a phase shifter part controlled by FPGA, two class-E power amplifiers, a four-port power combiner and two coil loads. Depending on the phase control of FPGA, the power ratio of outputs at the two coil loads becomes 1:1, 2:0 and 0:2. The manufactured system has delivered 1W DC power to loads at 125 kHz. The total DC-to-DC conversion efficiency shows more than 40 % including PA efficiency of 79 %.

• Journal of the Korean School Mathematics Society
• /
• v.23 no.2
• /
• pp.203-222
• /
• 2020

Because the role of the teacher is important for the education to actualize the goals of the curriculum, the interest about the teacher's knowledges has been addressed as an important research topic. Among them, the pedagogical content knowledge is the knowledge that can emphasize the professionalism of the teacher. In this study, I analyzed the elementary pre-service teachers' the problem solving strategies that they imagined the methods that elementary school students can think about fraction division. Pre-service teachers who participated in this study were completed all of the mathematics education courses in the pre-service teachers' education courses. The research was conducted using the four type-problems of fraction division. The results showed that elementary pre-service teachers responded in the order of equal sharing problem-measurement division-partitive division-context of determination of a unit rate problem. They presented significant responses not only with typical algorithms but also with pictures or expressions. On the basis of this research, we have to take an interest in the necessity of sharing and recognizing various methods of fraction division in pre-service teachers education.

• Clean Technology
• /
• v.20 no.3
• /
• pp.277-282
• /
• 2014

In this study, PU-LMO was made by immobilization of LMO on urethane foam (PU) with using an EVA as a binder. PU-LMO was characterized by using X-Ray Diffractometer (XRD) and Scanning Electron Microscopy (SEM). The optimal ratio of EVA/LMO for preparation of PU-LMO was 0.26 gEVA/gLMO. The adsorption of lithium ions by PU-LMO was found to follow the pseudo-second-order kinetic model. The equilibrium data fitted well with Langmuir isotherm model and the maximum removal capacity of lithium ions was 17.09 mg/g. The PU-LMO was found to have a remarkably high selectivity of lithium ions and high adsorption capacity because the distribution coefficient ($K_d$) of lithium ion was higher than those of other metal ions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.547-552
• /
• 2010

A modified VIStA (vortex inertial staged air) burner was developed and used in a once-through-type boiler. For safety, the combustion in this burner is of the non-premixed type. An air damper is installed to control the distribution of air to each combustion chamber. The effects of the air-fuel ratio and air distribution on NOx formation were investigated. The newly modified VIStA burner gives NOx reduction effect by maximum 20% in the combustion chamber of a boiler, while it yields more uniform flame than the conventional burner.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.175-183
• /
• 2004

The most important element is a rise ratio when regarding beauty and economics of arch bridges. Only the effect of dead load has been considered to decide the rise ratio. In this study, when going over the rise ratio of arch bridges, examined the problems, that the determination of the rise ratio by the dead load has, by adding the factor of a determination of optimum rise ratio, which is not only the effect of the dead load that has been currently considered but also the problem with respect to dynamic stability that is now taken seriously. Synthetically, when deciding rise ratio that is investigated in basic step of design, it is necessary to consider the evaluation dynamic stability.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.28-38
• /
• 2004

This study presents the result of uncertainty and sensitivity analysis of a pharmacokinetic model which describes the distribution and removal of benzene at each organ when an indivisual inhales indoor contaminated air with benzene originated from groundwater. The pharmacokinetic model simulates the distribution of benzene deposited in organs of human body through inhalation of contaminated indoor air as well as degradation-metabolism in liver. This study focused on the uncertainty problem induced from the use of the single values for blood flow, partition coefficient, degradation constant, volume, etc. of each organ which was due to a lack of knowledge about these parameters or their measurements. To solve this problem, uncertainty analysis on the pharmacokinetic model was conducted simultaneously which would help understanding the risk assessment associated with VOCs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2319-2324
• /
• 2012

In this paper, the design of asymmetric branch line couplers using artificial dielectric substrate (ADS) is described. The effective permittivity and permeability increase in ADS because of the lots of the inserted via-holes. So the physical length and width of transmission lines realized on ADS are reduced compared to the standard lines. This enables one to design size-reduced microwave circuits. As an instance in this work, an asymmetric branch line coupler with the ratio of 3:1 is designed at 2GHz. The designed coupler has a small size of 53.4% compared to the normal circuit while the same performances are preserved. A good agreement between the simulated and measured asymmetric power dividing ratio is shown. The measured loss is only less than 0.2dB, which is a very small value.

• Journal of Ginseng Research
• /
• v.16 no.2
• /
• pp.124-128
• /
• 1992

Vsing the phosphorylated thylakoid membrane induced by 5-35kLux of light intensities, we investigated the chlorophyll nuorescence quenching of PSII and the phosphorylation of LHCPII i in relation to the chlorophyll-bleaching of Panax ginseng C.A. Meyer. In the Presence of DCMU, both of the fluorescence yield of non-phosphorylated thylakoid and the rate of fluorescence quencing dependent on the Phosphorylation were high p. ginseng more then Glyine max L. And at the high light F intensity (above 25 kLux) the fluorescence quenching rate of p. ginseng compared with that of G. max reached nearly to 2 times. The LHCPII of P. ginseng was composed of 3 major Polypeptides (24.5, 26 and 27kD) and 3 minor polypeptides (24, 25.3 and 28.3kD) in the region of 24-29kD and differed, from G. max in both of the number and quantity of polypeptides. Among these polypeptides, the phosphorylated polypeptide dependent on the light intensity was 24kD in P. ginseng.