• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.4
• /
• pp.369-376
• /
• 2004

It is shown that the rate of wear can be related to on 'index of wear intensity'. Since both upper and lower specimens have used the same hardness values, equivalent hardness of 'index of wear intensity' used the mean hardness value of specimens. This index is derived from the external variables of load, sliding speed and the hardness of the sliding pairs. The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a disc on disc configuration. The materials of the specimens are used as ten kinds along their hardness. Using experimental data, we figured the relationship between wea rate and index of wear intensity. The result had been derived a newly wear equation in disc on disc wear system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.176-180
• /
• 1997

Evaluating an optimum seal design to minimize leakage is concerned in the aspect of flow control. Flow is characterized into five categories according to its leakage path. Effect of geometry and leakage path are evaluated according to variation of sealing geometry. To simulate an oil jet or oil mist type high speed spindle lubrication, the working fluid is regarded as two phases that are mixed flow of oil phase and air phase. Both of the turbulence and the compressible flow model were introduced in CFD(Computational Fluid Dynamics) analysis. This offers a methodological way of enhancement seal design for high speed spindle.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.922-923
• /
• 2015

풍력발전기는 2000년대 초반에 발전기 회전자 직경이 80m에 이르는 2MW급 풍력발전기들이 여러 회사에서 개발되면서 경제성 및 신뢰성도 향상되어 비약적인 발전을 이루게 되었다. 풍력발전시장의 신규발주와 설치장소가 한계점에 이르게 됨으로써 경제성이 뛰어난 대형 풍력발전기의 필요성이 대두되고 있다. 이와 같이 풍력발전기의 대형화 추세는 대형화를 통해 에너지 효율의 증대뿐만 아니라 단위 용량 당 건설비 및 설비비 절감이 가능하기 때문에 풍력발전기 대형화를 위한 기술개발이 활발히 진행되고 있다. 하지만 현재 풍력발전기에 사용되는 기계적 기어박스는 윤활유 주입 및 보수 점검의 문제점이나 소음, 진동, 마찰에 의한 열 발생 등의 문제점들을 가지고 있다. 이러한 문제점을 해결하기 위하여 기계적 기어박스를 마그네틱 기어를 이용하여 구성하고자 한다. 따라서 본 논문에서는 마그네틱 기어를 이용하여 10MW급 풍력발전기의 기어박스를 설계하고 그 가능성을 검토하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In this paper, film thickness and temperature distribution are measured in EHL point contact at high slip ratios. Infrared temperature mapping with two band pass fillers. proposed by Ausherman (1976). is used to measure temperature distribution. And the optical interferornetric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, slip ratio and load increased, size of Dimple and temperature rising became more large In addition, Position and shape of Dimple we changed by slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.48-48
• /
• 2000

진공부품에 사용되고 있는 재료는 여러 가지 있으나 회주철품은 진동 감쇄 및 흡진성이 우수하여 소음 발생이 적고, 조직 중에 흑연이 존재하므로 주강에 비하여 자기윤활작용이 있으며, 말차계수가 적어 마찰면의 면입이 높은 경우에도 소손 등의 이상 마멸현상이 적어 진공펌프, 내연기관, 공작 기계등과 같이 강인성과 내마멸성을 요구하는 부품에 많이 이용되어 왔다, 이 회주철도 대별하면 여러 종류가 있고, 진공 펌프용 재질은 주로 회주철 중에 ASTM A형으로 도면에 명기되어 있다. 따라서 본 제품을 개발하는 과정중에 연속 주조법으로 제조된 ASTM형이 기존의 재료에 비하여 내기밀성, 내마면성, 내피로성 및 기계적 성질등이 우수함을 확인하여본 재질로 개발하였고, 시험한 연구 결과를 발표하고자 한다. 실험은 ASTM A형으로 주조하기 위하여 용해된 용탕을 사형 주형에서 GC200으로 주조하고, ASTM D형은 D사의 연속 주조기에서 직경 30mm로 주조하였다. 이와 같이 주조된 사료를 일정한 크기로 시험편을 만들어 인장 강도, 경도, 피로한도, 피로성, 절삭성, 내유압성, 소입성과 내마멸성을 시험하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.54-64
• /
• 1995

대표적인 대형 베어링인 일체형 볼 베어링과 와기어 레이스형 볼 또는 로울러 베어링의 마찰 특성을 비성형 유한요소 프로그램인 MARC를 사용하여 상호간의 마찰형상에 대한 접촉응력과 마찰력 특성을 비교 해석하였다. 특히 와이어 레이스식 슬루잉 링 베어링은 우수한 마찰특성 때문에 건설기계, 하역기계, 광산기계나 탱크와 같은 국방무기 등에서 널리 사용되고 있다. 접촉면의 변형에 따른 일체형의 볼 베어링은 마찰력과 기울기면에서 와이어 레이스식 베어링에 비하여 크고, 같은 와이어 레이스식 베어링에서는 마찰력의 경우 볼 타입이 로울러 탕입에 비하여 약간 크게 나타났다. 이들의 계산결과를 종합하면 와이어 레이스식 베어링이 일체형 베어링에 비하여 마찰특성이 우수하고, 특히 와이어 레이스 베어링중에서 로울러 타입은 마찰 토오크면에서 균일하기 때문에 베어링을 사용한 제어기능 설계에서 특히 우수한 결과를 제공할 수 있다. 유한요소 해석결과는 기존의 실험결과와 잘 일치하고 있어서 슬루잉 링 베어링의 최적설계에 유한요소 해석의 유용함을 확인하였다. 또한 상부 구조물과 하부 구조물을 연결하기 위한 체결볼트의 구멍은 하중조건에 따라서 구조적 불안정성을 야기할 수 있음도 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.261-266
• /
• 2003

Foil air bearing, which is a noncontact bearing utilizing viscosity of operating fluid and elastic deformation of foil structure, has several advantages over rolling element bearings in terms of oilless environment, long life, high speed operation, and high temperature application over $500^{\circ}C$ . Recently advanced researches are actively being performed for the application to the extreme temperature such as gas turbines, as well as conventional small turbo machinery. In this paper, the principle of foil air bearing is introduced and a feasibility study to adopt a foil bearing as the turbine bearing of 65 HP turbo shaft engine, which is under development for UAV, is presented.

• Composites Research
• /
• v.13 no.4
• /
• pp.11-18
• /
• 2000

This study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. At the PTFE and polyimide alone mixture specimens, PTFE80%-polyimide20%, which shows the lowest mean friction coefficient and specific wear rate at 0.94m/s sliding speed. In case of the specific wear rate, copper30% specimen shows the lowest value of 2.537-5(mm3/Nm) in all specimens. It considered that the friction coefficient is affected by generating speed and quantity of wear film. In case specific wear rate, it is attributed to the fact that the surface hardness of wear film is proportioned to specific wear rate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.121-125
• /
• 2010

The infrared thermography technology rather than traditional nondestructive methods has benefits with non-contact and non-destructive testings in measuring for the fault diagnosis of the rotating machine. In this work, condition monitoring measurements using this advantage of thermography were proposed. From this study, the novel approach for the damage detection of a rotating machine was conducted based on the spectrum analysis. As results, by adopting the ball bearing used in the rotating machine applied extensively, an spectrum analysis with thermal imaging experiment was performed. Also, as analysing the temperature characteristics obtained from the infrared thermography for in-situ rotating ball bearing under the lubrication condition, it was concluded that infrared thermography for condition monitoring in the rotating machine at real time could be utilized in many industrial fields.