• Transactions of Materials Processing
• /
• v.7 no.2
• /
• pp.177-185
• /
• 1998

The kinematically admissible veolcity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric lane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal one are determined by the minimization of the plastic work and that the curvature of the extruded products increase with the eccentricity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.175-182
• /
• 1994

Effect of some process variables including area reduction, stroke advance, materials on the extrusion load, plastic flow and height ratio of upper to lower extruded parts in the cup-cup axisymmetric extrusion were experimentally investigated and analyzed. Deformed pattern is visualized by grid-marking technique using half-cut billets splitted. The influence of using split specimen and original specimen on the extrusion load and height ratio is examined by experiment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.250-253
• /
• 1998

The kinematically admissible velocity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric plane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal zone are determined by the minimization of the plastic work and that the curvature of the extruded products increases with the eccentricity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.80-83
• /
• 1999

Rigid Plasticity Finite Element Analysis is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric square dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric square dies is caused by the eccentricity of square dies. The deviated velocity is changed with the distance form the center of cross-section of the workpiece. The results show that the curving of products and the shapes of the dead metal zone are determined by Rigid Plasticity Finite Element Analysis and that the curvature of the extruded products increases with the eccentricity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.330-336
• /
• 1989

In analyzing the axisymmetric backward extrusion process a new method of analysis using upper-bound theorem is proposed in which the plastic zone and dead metal zone cam be predicted. Experiments are carried out with commercial aluminum. The metal flow on the meridional plane has been visualized experimentally by using the gridded specimens. It is shown that the theoretical results both in extrusion load and deformation pattern are in good agreement with the experimental results and they can be used for effective punch and die design to consider various process parameters in axisymmetric backward extrusion.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.97-104
• /
• 1996

It is very important to obtain the knowledge of loads and flow patterns in most processes because these information are the fundamental data of die design and process design. The objective of present study is to investigate loads and metal flow patterns for various process conditions in flat die extrusion of square-bars from circular billets. For analyzing the metal flow patterns of the billets photo etching is used on sections of split specimen. From this method metal flow patterns are analyzed for various area reductions friction factors and punch stroke through the process from initial-stage to final-stage. Experiments are carried out with hard solder billets at room temperature.

• Journal of The Korean Association For Science Education
• /
• v.35 no.2
• /
• pp.231-245
• /
• 2015

Flipped learning can be used as an innovative teaching method in science education. This study analyzes video clip produced by pre-service elementary school teachers for flipped learning and explore strategies to organize effective visualization. The pre-service elementary school teachers focused on providing information on macroscopic natural phenomenon using concrete case selection strategy for earth science class. They used marker and spatial transformation elements effectively, but their efforts to link the elements to the experience of students were not sufficient. In addition, it was very rare to put the contents into simplified drawing or provide extreme cases to enhance the imagery of students. In addition, it is necessary to provide specific case of multi-modal and link the material to the experience of students closely through familiar cases or analogical model to establish an effective visual teaching material. It may also be needed to present simplified drawing for enhancing imagery and provide extreme cases to make students have an opportunity to infer a new situation.

• Journal of agricultural medicine and community health
• /
• v.42 no.1
• /
• pp.1-12
• /
• 2017

Objectives: In this study, we analyzed vision statements of the 6th community health plan of local government in Korea. Methods: We examined vision statements letters, missions and strategy plans, and long-term missions of 6th community health plans of 229 local government in Korea. We also analyzed the numbers of vision letters, sentence examination, word frequency, each vision statement with frequency analysis, chi-square test, and one-way ANOVA. Results: Among 229 local government, 172(75.1%) of local government had the number of letters (Korean) less than 17 of vision statements, and there were a significant differences according to type of community health centers (p<0.05). Figuration (37.1%) were the most used in an expression of vision statement sentence, and special characters (43.2%) were the most used language except Korean. The most commonly used words of vision statement in order of frequency were 'health', 'happiness', 'with', 'citizen', 'city', '100 years old' etc. Chungcheong provinces and Daejeon metropolitan city had a highest score in directionality on phrase evaluation, and there were a significant differences according to regional classes of local government (p<0.01). Gyeongsang provinces, Ulsan, Daegu, and Busan metropolitan cities had a highest score in future orientation and sharing possibilities on phrase evaluation, and there were a significant differences according to regional classes of local government (p<0.01). Conclusions: Vision is one of the most important component of community health plan. We need more detailed 'vision statement guideline' and the community health care centers of local government should effort to make more clear and complete their vision.