• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.121-130
• /
• 2007

In this paper, large scale experimental model tests were performed to investigate the distribution of earth pressure acting on embedded rigid pipes having different bedding conditions. For these tests, very light weighted EPS blocks were installed at top and bottom of the rigid pipe and Jumunjin Standard Sand was used as a ground material. As results of model tests, for the case of no bedding on the pipe, the measured pressure at the bottom of the pipe was $4.96_{tf/m^2}$ whereas they were in the range of $1.87{\sim}4.96_{tf/m^2}$ in the case of EPS beddings being installed at the top and the bottom of the pipe. Therefore, for the case of EPS bedding being installed, the ratio of reduced pressures acting on the pipe, compared with the case of no EPS beddings, were in the rage of 16~62%. As a result of parametric test with changing the locations of EPS bedding, the trend of reducing the stress acting on the pipe was in the order of bottom bedding, top bedding, and top and bottom bedding. Effect of bedding positions on the reduced magnitude of acting pressure on the pipe was more significant in the case of top bedding than in the case of the bottom bedding.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.33-33
• /
• 2000

고온의 연소가스로부터 노즐 표면을 보호하기 위하여 슬롯을 통하여 냉각 유체를 분사하는 슬롯 막냉각에 대하여 연구하였다. 냉각효율 및 열전달 특성은 주유동과 2차 유동의 분사율에 따라 크게 달라지며, 형상변화 및 유동가속에 의해서도 냉각 효과의 변화를 가져오게 된다. 따라서 본 연구에서는 실험을 통하여 면적비가 16:1인 축소노즐에서 압축성 효과를 배제할 수 있는 유동속도 범위 내에서 분사율 변화(0.5 $\leq$ M $\leq$ 3.0)에 따른 슬롯 막냉각 열전달 특성을 고찰하고, 평판 슬롯 막냉각 경험식의 결과와 비교하였으며, 수치해석을 통하여 축소노즐과 원형관에서의 냉각효율 및 열전달 특성을 비교함으로서 이를 검증하였다. 축소노즐에서의 슬롯 막냉각 열전달 특성은 단열벽면조건을 형성하여 노즐 표면을 따라 설치된 열전대를 이용하여 측정하였다. 그 결과 상대적으로 낮은 분사율(M=0.5, 1.0)에서 분사율 증가에 따른 냉각효율의 증가가 크게 나타났으며, 분사율이 높아짐(M $\geq$ 2.0)에 따라 냉각효율의 증가폭이 점점 감소하고, 일정 분사율 이상에서는 냉각 효율의 증가가 크게 둔화되었다. 분사율이 낮을 경우 평판 슬롯 막냉각 경험식으로 주어진 결과보다 상류에서는 높으나 하류로 진행하면 비슷한 냉각효율을 보였고, 분사율이 높은 경우 평판보다 전 범위에서 약간 높은 냉각효율을 나타냈다. 수치해석 결과에서는 분사율이 낮을 경우 축소노즐의 냉각효율이 원형관에서의 냉각효율 보다 낮거나 비슷하게 나타났으며, 분사율이 높아짐에 따라 축소노즐에서의 냉각효율이 오히려 높아지는 것으로 나타났다.타내었다. 액체 제트의 속도는 처음에는 일정하게 유지되다가 운동량을 보존하기 위해 가스로부터 운동량을 받아 점차 가속되어지는 것으로 나타났다.본 규격은 키, 총장, 어깨길이, 등길이, 머리길이, 머리둘레, 진동둘레, 목둘레, 가슴둘레, 허리둘레, 배둘레, 엉덩이둘레, 앞품, 뒤품, drop치를 포함하고 있고, 각 규격에서 호칭간 치수 간격도 함께 제시하고 있다. 본 연구 결과에서 보듯, 현행 8규격의 무진복의 각 호칭간 적정 허용범위를 고려해 합리적인 치수체계를 정립한다면 치수에 대한 적합도가 상당히 증가할 뿐 아니라 생산비용도 상당히 감축할 것으로 생각된다.나타났다. 4) 호감적 서비스능력 차원에서 세 독립변수간에 유의한 3원 상호작용이 존재하는 것으로 나타나( $F_{2,228}$=15.62, P<.001) 20대에 적합한 의복 착용시( $F_{2,228}$=3.98, P<.05)와 60대에 적합한 의복 착용시( $F_{2,228}$=16.55, P<.001) 점포유형과 격식차림간에는 유의한 상호작용이 존재하는 것으로 나타났다. 5) 호감을 구성하는 세 요인들이 구매의도에 미치는 영향을 조사한 결과 호감적 인상차원은 29%(P<.001), 호감적 서비스능력차원은 6%(P<.001)의 구매의도를 설명해 주는 것으로 나타났다. 본 연구결과 노년 소비자에게 호감을 주는 판매원의 외모는 구매의도에 영향을 주어 실버의류산업의 이익증대와 밀접한 연관을 갖는 서비스품질의 중요한 요인으로 밝혀졌다.중요한 요인으로 밝혀졌다.로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1971-1978
• /
• 1992

A turbulent flow in a conical diffuser with total divergence angle of 8.deg. was numerically studied. The low Reynolds number k-.epsilon. model(Launder-Sharma model) was adopted to simulate the turbulence. The continuity and time averaged Navier-Stokes equations in a nonorthogonal coordinate system were solved by a finite volume method based on the fully elliptic formulation. The low Reynolds number k-.epsilon. model reasonably simulates the pressure recovery and the mean velocity components. However, there are also considerable discrepancies between predicted and measured shear stress distribution on the wall and turbulent kinetic energy distributions. It is necessary to investigate the flow structure at the entry of the diffuser, numerically as well as experimentally.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.674-681
• /
• 2001

An experiment is conducted to investigate the effect of the inclination angle on convective boiling heat transfer of a uniformly heated tube. The test section used is a stainless steel tube with10.7mm in inner diameter. The hating length is 3m and is heated directly by an AC current. The test fluid is R-113. Experiment are carried out with mass flow rates of 300, 500 and $700\;kg/m^{2}s$, and heat fluxes varying from 5 to 65 kW/$m^2$. The inclination angles of the tube are $0^{\circ},\;5^{\circ},\;11^{\circ}\;and\;25^{\circ}$. the circumferential temperature variation at low quality region and the location of dryout at high quality region are mainly observed. Circumferential anisothermality occurring at low mass flow rate and low quality conditions is gradually reduced with the increase in the inclination angle and finally disappears at the inclination angle of $25^{\circ}$. Critical quality where dryout is initiated is seriously influenced by the inclination angle. Wall temperature after critical quality is also affected by the inclination angle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.850-856
• /
• 2004

When a shock wave arrives at the open end of a tube, an impulsive wave is discharged from the tube exit and causes serious noise and vibration problems. In the current study, the effect of the cross-sectional area of a circular tube on the impulsive wave is investigated using computational methods. Marten-Yee's TVD scheme was employed to solve axisymmetric, unsteady, compressible Euler equations. With a change in the cross-sectional area of the tube, the Mach number of an incident shock wave is varied between 1.01 and 1.50. The results obtained show that the magnitude of the impulsive wave strongly depends upon the Mach number of the incident shock wave and the cross-sectional area of the tube. It is also found that for a given cross-sectional area of the tube, the impulse wave has strong directivity to the tube axis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.2
• /
• pp.119-124
• /
• 2015

Numerical study on the new design of the liquid mass flow meter in infinitesimal flow rate for semiconductor production is performed. The heater and thermistor are wired on the circular tube about 0.3mm inner diameter with designed gap between them. After the time interval from the single pulse heating the thermistor reaches its peak temperature and this time interval is almost inversely proportional to the liquid mass flow rate. The axial conduction in tube wall and convection through the flow is combined. As a result, the peak temperature moving velocity is much smaller than flow mean velocity and there is no linear relationship between them. In this study, the effects of design parameters such as the tube inner/outer diameter, wired heater width, and the gap between heater and thermistor are investigated and the trends of optimization in these parameters are discussed.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.289-297
• /
• 2002

The regional distribution and relative frequency of neurohormonal peptides-producing cells were demonstrated in the gut of the stomach teleost, the Mandarin fish, Siniperca scherzeri Steindachner, using 7 types of specific antisera raised against mammalian regulatory peptides. The gastrointestinal tract of the Mandarin fish was divided into three portions from proximal to distal, stomach, small intestine and large intestine. Cells showing immunoreactivities against regulatory peptides were situated in the epithelial lining, between epithelial cells, and gastric or intestinal gland regions with various frequencies along with gastrointestinal tract. Mast of immunoreactive cells in the epithelial lining portion were generally spherical or spindle shape having long cytoplasmic process that were reached to the lumen (open type cell) while cells showing round in shape (closed type cell) were found in the gastric gland of the stomach occasionally. Serctonin-, samatostatin-, gastrin-, cholecystokinin (CCK)-8- and human pancreatic polypeptide (HPP)-immunoreactive cells were observed in this study. However, no insulin- and glucagon-immunoreactive cells were found. Serotonin- and somatostatin-immunoreactive cells were restricted to the stomach regions with moderate and numerous frequencies, respectively. Gastrin-immunoreactive cells were demonstrated in the stomach and small intestinal portions with a few and moderate frequencies, respectively and CCK-8-immunoreactive cells were restricted to the small intestinal portions with moderate frequency. In addition, HPP-immunoreactive cells were demonstrated in the stomach and small intestine with numerous frequencies, respectively. In conclusion, the distribution and relative frequency of these immunoreactive cells in the gastrointestinal tract of the Mandarin fish shows peculiar patterns compared to those of other stomach and/or stomachless teleost.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.479-491
• /
• 1999

This study was performed to investigate the distribution and differentiation of choline acetyltransferase (ChAT)-immunoreactive cells in the basal nucleus of Meynert of the postnatal and adult rat forebrains, utilizing techniques of immunocytochemistry. According to the cell shape and the ratio of long axis vs short axis of cell soma, the ChAT-immunoreactive nerve cells in the basal nucleus of Meynert of the adult rat were classified into six types. In the adult rat, the frequency distributions (FD) of round, oval, elongated, fusiform, triangular and polygonal cells were 9.4%, 35.5%, 32.1%, 5.9%, 9.1% and 8.0%, respectively. The FD of oval and round nerve cells on the postnatal day (PND) 14 were observed to be 18.7% and 51.5%, respectively. Those were shown to be progressively decreased during developmental process to the adult. Also, those of elongated and triangular nerve cells on the PND 21 were observed to be 30.4% and 10.1%, respectively. Those were shown to be same phenomenon a,1 those in the round and oval cells. Meanwhile, those of the triangular and polygonal nerve cells were progressively increased from the early postnatal stage to the adult. The total mean volumes of ChAT-immunoreactive cell somata in the PND 7 rat were the lowest $(1,083{\mu}m^3)$ and those in the PND 21 rat were shown to be the highest $(5,045{\mu}m^3)$. But in the adult, those were decreased to $(2,731{\mu}m^3)$. Those in the PND 21 rat were shown to be about 84.7% larger than those in the adult. On the electron micrography, the cell organelles such as ribosomes, polysomes, rough endoplasmic reticula (RER) and mitochondria were well developed in the PND 21 rat forebrains, but Golgi complexes were shown to be proliferating phase. Especially, ribosomes, polysomes and RER were immunoreactive in the tissues treated with 0.05% triton X-100. According to the observations in the present study, it is considered that the ChAT-immunoreactive nerve cells in the basal nucleus of Meynert of the rat forebrains are differentiated throughout the following processes of changes during the postnatal development: 1) increase of cell soma volumes with the differentiation of tell organelles and neurites, 2) increase in the FD of differentiated tell types and 3) cell schrinkage without cell loss. The ribosomes, polysomes and RER are considered to be closely related to the intracellular localization and biosynthesis of the ChAT but not Colgi complex.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.289-298
• /
• 2016

An experimental research was performed using fibers for the purpose of retrofitting existing reinforced concrete circular columns. Glass fiber (GF) and polyethylene terephthalate (PET) were used as well as combined GF+PET (HF). PET has high tensile strength (over 600 MPa) and high ductility (about 15%), but has very low elastic modulus (about 1/6 of GF). A total of four columns was tested against laterally applied reverse cyclic load: control column, GF-, PET-, and HF-strengthened columns. All columns retrofitted using fibers demonstrated improved moment capacity and ductility. Moment capacity of GF-, PET-, and HF-strengthened columns was 120%, 107%, and 120% of the control column, respectively. Drift ratio of all retrofitted columns also increased by 63 ~ 83% over the control column. The final failure mode of the control column was main bar buckling. The final failure mode of the GF- and HF-strengthened columns was GF rupture while that of the PET-strengthened column was main bar rupture in tension. No damage was observed for PET at the ultimate stage due to excellent strain capacity intrinsic to PET. Current test results indicate that PET can be effectively used for seismic retrofit of RC columns. It is noted that the durability characteristics of PET needs to be investigated in the future.

• Journal of Mushroom
• /
• v.14 no.3
• /
• pp.75-80
• /
• 2016

Morphological and culture characteristics of the novel Phellinus linteus variant KACC93057P collected in Korea were characterized in this study. The surface of the was angular, sessile, tough-woody, concentrically zonate, and dark brown in color. Basidiocarppores were circular, with 5-7 pores per mm. The hyphal system was dimitic, and basidiospores were ellipsoid or oval, $4.5-6{\times}4-5$, exhibiting characteristics typical of P. linteus. The optimum temperature for mycelial growth was $25-30^{\circ}C$, and optimal pH for growth was 5-7. The mycelial growth rate of P. linteus KACC93057P was faster than that of other P. baumii isolates. On growth medium, KACC93057P formed aerial mycelia with density higher than that of other isolates. The internal transcribed spacer (ITS)-ribosomal DNA sequences were closely related to the sequences P. linteus complex.