• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.103-103
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.57-58
• /
• 2006

A Simulation model is developed to minimize the path tracking errors when the non-circular cutting is done by a VCM(voice coil motor) driven tool. The relationship between PWM(Pulse Width Modulation) duty ratio and velocity of voice coil motor is theoretically derived from combining the circuit equation for the coils and the motion equation for the magnetic rod of the voice coil motor. The path tracking errors are showed differently according to the rotational speed, the number of segments and the control period in digital control. Given a required accuracy in the non-circular cutting, the optimal values for those parameters are determined based on the developed simulation model.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.743-749
• /
• 2014

본 연구에서는 고강도-고연성 펄라이트 강선을 제조하기 위하여 비원형 신선 공정을 적용하였다. 다단 비원형 신선 공정을 A와 B로 정의한 2 종류의 가공경로를 이용하여 상온에서 12 패스까지 수행하였다. 비원형 신선 공정과의 비교를 위해서 기존의 원형 신선 공정을 수행하고 기계적 특성과 집합조직 발달에 대해 비교를 수행하였다. 원형 신선 공정으로 제조된 강선은 10 패스에서부터 박리파괴가 관찰되었지만, 비원형 신선 가공경로 B의 경우는 12 패스에서도 박리파괴가 발생하지 않았으며, 이는 X-선회절로부터 측정된 집합조직 결과에서 원형집합조직의 발달이 적은 것과 연관된다. 따라서, 다단 비원형 신선 공정을 통하여 기존의 신선 공정보다 박리파괴의 발생 가능성을 저감시킴으로써 높은 비틀림 연성을 갖는 고강도 펄라이트 강선을 제조할 수 있음을 확인할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.682-685
• /
• 2017

본 연구는 비원형 Effervescent Type 이유체 노즐의 분사 특성을 조사하기 위한 실험적 연구를 수행하였다. 이를 위해 거의 동일한 노즐 출구 면적으로 가공한 2종류의 비원형 노즐 (E1, E2)과 1종류의 원형 노즐 (C)을 대상으로 비교 실험을 진행하였다. 이때 노즐에 장착된 Aerorator는 노즐 출구 면적과의 Aspect Ratio를 맞추기 위해 지름이 다른 3종류를 사용하였다. 따라서 각 노즐마다 3가지의 Aspect Ratio에 따라 3번의 실험을 진행하였으며, 전체 총 9종의 실험이 진행되었다. 실험은 Liquid의 유량을 고정시킨 후, 유입되는 Air의 양을 제어하며 진행하였으며, 노즐 내부 압력과 액적의 크기 (SMD)를 측정하고 노즐에서 분사 이미지를 촬영하였다. 이를 통해 3종의 노즐의 유량 계수를 압력 분무방정식과 Jedelsky 방정식을 비교 계산하였고, Jedelsky 방정식이 약 4배 정도 더 큰 값을 갖는 것을 확인하였다. 노즐에서 분사되는 SMD는 원형보다 비원형에서 더 작은 값을 갖는 것으로 나타났으며, 이는 유량 계수 값의 차이 의해 야기된 것으로 예상된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.339-344
• /
• 1993

A study for a lathe to machine workpieces with noncircular corss-sections is presented. The noncircular cutting is accomplished by controlling the radial tool position synchronized with the revolution angle of spindle. A learning control algorithm is suggested for the toll positioning, of which the control performances are analyzed and simulated on a numerical computer that the effectiveness of the control is convinced. The learning control is tested on a NC-lathe which shows successful results.

• 소성∙가공
• /
• 제8권5호
• /
• pp.520-526
• /
• 1999

In this study a practical formula based on the experime수 랙 the estimation of load in the non-circular tube extrusion with the mandrel is proposed by using the effective extrusion ratio. Through some experiments for the several shaped sections, the coefficients of the empirical equation are determined by ticine as a model material at room temperature. The proposed empirical formula for the estimation of extrusion load will be applicable to the non-steady state as well as steady state for the extrusion of various shaped tubes from hollow billets.

• 소성∙가공
• /
• 제4권4호
• /
• pp.302-321
• /
• 1995

A method of determining an optimum blank shape for the non-circular deep drawing process is investigated. The rigid-plastic finite element method is introduced and the computer program code is developed. The ideal shape of a drawn cup with uniform wall height is assumed and metal flow is traced back-ward step by step to predict an initial blank shape of the ideal cup. For examples of the non-circular deep drawing products, three cases of drawn cup with quadrilateral punch shape are considered and optimum blank shapes for each case are proposed and compared with experimental results.

• 소음진동
• /
• 제10권2호
• /
• pp.291-298
• /
• 2000

This paper intends to provide an analytic vibrational model of non-circular cutting by a lathe and to investigate its stability criteria. A single degree-of-freedon model based on the orthogonal cutting theory has the characteristics of parametric excitation due to the nonlinear cutting force that changes periodically its direction as well as its magnitude. The Floquet theory has been applied to investigate the stability of the linearized system and the stability diagrams have been obtained with respect to the ovality, the cut velocity and the cut depth. Also nonlinear analysis has been performed to verify the linear analysis and compare the results with those from circular cutting. Results show that a critical cut depth is decreased as the ovality is increased while a critical cut velocity is increased as the ovality is increased. Also, a good agreement in critical conditions has been observed between the linear and nonlinear analyses for the ovality less than 2%. Accordingly, the linear analysis can be said to be applicable for most practical oval cuttings whose ovality are much less than 2%.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.96-104
• /
• 1995

A study for a lathe to machine workpiece with noncircular cross-section is presented. The noncircular cutting is accomplished by controlling radial tool position synchronized with revolution angle of the spindle according to the desired cross-sectional shape. A learning control algorithm is suggested for the tool positioning. The learning law of the algorithm is based on pole-zero cancellation, which guarantees the control stability. The control performances are analyzed and simulated on a numerical computer that the effectiveness of the control algorithm is convinced. The algorithm is tested on a conventional NC-lathe which shows some successful results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.193-199
• /
• 2000

Control system for cutting piston used in vehicle that is one of the 3D shape cutting using CNC lathe is presented. In order to cut the hybrid piston shape using CNC lathe, defined piston shape and change into machine code. The control software was developed for the high speed piston shape cutting. In this paper, the performance of this software was evaluated practically. As a result, the evaluated cutting precision was quantitatively compared with theoretical precision. Also the productivity and the quality by using CNC lathe with control software were evaluated those by using profiling.