• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.250-256
• /
• 2003

Lactic acid bacteria with amylolytic and acid producing activities can ferment starch directly to lactic acid thereby producing a monomer for the production of biodegradable poly lactic acid (PLA). In this study, the strain producing L-lactic acid from soluble starch was isolated from Nuruk. The isolated strain was identified as Enterococcus sp. through its morphological, cultural, biochemical characteristics as well as the 16S rDNA sequence analysis, and named Enterococcus sp. JA-27. Enterococcus sp. JA-27 produced exclusively L-lactic acid from soluble starch as a carbon source. The optimal conditions for the maximum production of L-lactic acid from Enterococcus sp. JA-27 were 30 C, pH 8, 1.5 % soluble starch as a substrate and 3.5 % tryptone as a nitrogen source, 0.1 % $K_2$$HPO_4$, 0.04 % $MgSO_4$. $7H_2$O, 0.014 % $MnSO_4$$.$4$H_2O$, 0.004% $FeSO_4$$.$$7H_2$O. Batch and fed batch culture were carried out and the former was more effective. L-Lactic acid production in the optimum medium was significantly increased in a 7 L jar fermenter, where the maximum L-lactic acid concentration was 3 g/L. For the purification of lactic acid in fermented broth, two stage ionexchange column chromatographies were employed and finally identified by HPLC.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.491-499
• /
• 2008

It is really urgent to develop wastewater treatment system which is economically efficient, occupies small area for buildup, can be easily operated, discharges small amount of sludge due to the more strict water quality standard, the expensive water and energy cost and so on. This study on treatment of wastewater including nonbiodegadable materials using white-rot fungus biofilm were designed to investigate the submerged type of biofilm, hydraulic retention times, recycle rates, and module turning times. Removal efficiencies of fully exposed biofilm type in atmosphere are similar to submerged biofilm of aeration type. The optimum conditions of white-rot fungus biofilm of fully exposed type in atmosphere are HRT 3$\sim$4 hr, recycle rate 6$\sim$10 Q, module turning times 0.5$\sim$2 times/min. At this time, removal efficiencies of organics were COD$_{Cr}$ 65.0$\sim$69.9%, NBDCOD 70.4$\sim$72.7%, BOD$_5$ 88.8$\sim$90.1%, SS 84.2$\sim$90.4%. Moreover average effluent concentration of BOD$_5$(8.9 mg/L) satisfied water quality standard of heavy water(BOD$_5$ less than 10 mg/L) but concentration of NBDCOD(29.6 mg/L) was higher than water quality standard of heavy water(NBDCOD less than 20 mg/L).

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.84-91
• /
• 2007

Purpose: The aim of this study was to report seven cases of metallic radial head prosthesis and present the limit of use in Korea. Materials and Methods: Metallic radial head arthroplasty was performed on 7 patients between April 2006 and December 2006, who had complex elbow injury including comminuted radial head fracture. Indication, operative findings and outcome were assessed. Availability and payment of implant were investigated. Results: All of the patients had more than one associated injury including coronoid fracture, olecranoan fracture, and ligament ruptures. According to Mason classification, there were three type III and four type IV fractures. All radial head fractures were too comminuted to reconstruct. There were two excellent results, four good, and one poor, as graded by Mayo score. There were no patient with instability and implant related complications. Insufficient supply of implant did not enable to do scheduled surgery in 2 cases. Current medical insurance did not cover charge for radial prosthesis, five patients could not help paying for that by themselves. Conclusion: Metallic radial head implants are useful when the radial head cannot be repaired reliably. Preoperative preparing and coverage by medical insurance based on appropriate indication are helpful for decision for a treatment option.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.283-290
• /
• 2016

Even though existing methods for orthophoto production in traditional photogrammetry are effective in large areas, they are inefficient when dealing with change detection of geometric features and image production for short time periods in small areas. In recent years, the UAV (Unmanned Aerial Vehicle), equipped with various sensors, is rapidly developing and has been implemented in various ways throughout the geospatial information field. The data and imagery of specific areas can be quickly acquired by UAVs at low costs and with frequent updates. Furthermore, the redundancy of geospatial information data can be minimized in the UAV-based orthophoto generation. In this paper, the orthophoto and DEM (Digital Elevation Model) are generated using a standard low-end UAV in small sloped areas which have a rather low accuracy compared to flat areas. The RMSE of the check points is σ_H = ±0.12 m on a horizontal plane and σ_V = ±0.09 m on a vertical plane. As a result, the maximum and mean RMSE are in accordance with the working rule agreement for the airborne laser scanning surveying of the NGII (National Geographic Information Institute) on a 1/500 scale digital map. Through this study, we verify the possibilities of the orthophoto generation in small slope areas using general-purpose low specification UAV rather than a high cost surveying UAV.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.273-282
• /
• 2016

There has been growing social interest recently in the movement rights of people with reduced mobility. However, it simply eliminates the temporary inconvenience of walking of people with reduced mobility because it focuses only on supply of institutional facilities. Therefore, we look forward to improving movement welfare by proposing an optimized path finding algorithm for people with reduced mobility that takes into consideration physical elements affecting their movement, such as slope, steps etc. We selected Walking barrier factor by analyzing previous studies and calculated the relative importance of Walking barrier factors using an Analytic Hierarchy Process(AHP). Next, through the fuzzy system, the Walking disturbance level of link, which integrates the weights of Walking barrier factors and the attributes of each link, is derived. Then, Walking path cost that takes into consideration the ‘length’ factors is calculated and an optimized path for people with reduced mobility is searched using Dijkstra’s Algorithm. Nineteen different paths were searched and we confirmed that the derived paths are meaningful in terms of improving the mobility of people with reduced mobility by conducting a field test. We look forward to improving movement welfare by providing a navigation service using the path finding algorithm proposed in this study.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.391-396
• /
• 2005

This study was conducted to neutralize acid mine drainage (AMD) of Soo and Hambaek mines, located in Kangwon-Do Korea, using $Ca(OH)_2$. When 0.295 g $Ca(OH)_2/L$(AMD) was added to the drainage in a neutralization reactor, pH of liquid in the reactor and the effluent were maintained at 9.5 and 8.4, respectively. The pH met the required effluent standard. With 10~50% of feedback of effulent sludge to the reactor, the pH of neutralized fluid in the reactor remained nearly constant, but $SO{_4}^{-2}$ concentration in the effluent increased adversely compared to the non-return sludge case. With 30% of sludge feedback, it was possible to decrease suspended solids (SS) concentration in the effluent without a problem in Fe concentration. When 100 mL of 0.1 M $BaCl_2$ was added to 1 L of AMD treated with $Ca(OH)_2$, removal efficiency of $SO{_4}^{-2}$ increased to over 90%. Aanalyses of pH, Fe, and $SO{_4}^{-2}$ showed that the optimal results were obtained when pH of neutralizatio reactor and sludge return ratio were maintained at 9.5 and 30%. This can result in possible cost reduction of 31.4% for maintenance and 29.8% for facility construction by alternating $Ca(OH)_2$ to NaOH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.237-249
• /
• 2017

This research aims to gain a better understanding of college students' thoughts on what factors make them happy and contribute to enhancing their happiness. We focused on the relationship between their self-assessed happiness and various factors affecting happiness, such as their socio-economic status, relationships with others, future orientation, and daily activities. Survey data were collected from October, 2014 to December, 2014 at a South Korean University. The final total number of respondents was 474 from 500 distributed questionnaires, after excluding 26 responses with missing values and unanswered items. The response was comprised of 247 male students, and 227 female students, and of 268 freshmen, 145 sophomores, 35 juniors, and 26 senior students. Factors that were statistically significant were gender, year, average cost of leisure, appearance satisfaction, conversation hour with parents, having girlfriend/boyfriend, sexual experience, number of friends, satisfaction with major, Grade Point Average (GPA), studying hours, time for self-improvement, reading hours, use of smart phone hours, number of daily meals, exercise hour, schedule management and future goal setting. This research was conducted utilizing only data from one university and so it may not be appropriate to generalize the results. Moreover, some of the variables are not in line with previous studies on happiness. Some other mediating variables may exist. Therefore, following research should be conducted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.12-19
• /
• 2020

The clustered heterogeneous wireless sensor network is comprised of sensor nodes and cluster heads, which are hierarchically organized for different objectives. In the network, we should especially take care of managing node resources to enhance network performance based on memory and battery capacity constraints. For instances, if some interesting events occur frequently in the vicinity of particular sensor nodes, those nodes might receive massive amounts of data. Data congestion can happen due to a memory bottleneck or link disconnection at cluster heads because the remaining memory space is filled with those data. In this paper, we utilize drones as mobile sinks to resolve data congestion and model the network, sensor nodes, and cluster heads. We also design a cost function and a congestion indicator to calculate the degree of congestion. Then we propose a data congestion map index and a data congestion mapping scheme to deploy drones at optimal points. Using control variable, we explore the relationship between the degree of congestion and the number of drones to be deployed, as well as the number of drones that must be below a certain degree of congestion and within communication range. Furthermore, we show that our algorithm outperforms previous work by a minimum of 20% in terms of memory overflow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.184-189
• /
• 2018

Recently, research on lightweight automobiles is increasing continuously to respond to the high safety standards and environmental regulations. The application of high strength steel is one of the effective methods for developing lightweight car bodies. A TWB (Tailor Welded Blank) is major method that allows partial high strength with light weighting using a multi-thickness and multi-material welded blank. On the other hand, additional welding process is required to prepare the blank and quality control for the welding process also required. To secure this point, the TRB (Tailor Rolled Blank) method was suggested. In the TRB method, the thickness of sheet is controlled by the rolling presses and the production efficiency is much higher than welding in TWB methods. In this study, the formability of high strength TRB steel plate was analyzed to examine the rolling effect of the blank. The formability of the specimen was tested using 0.8 and 1 mm thick steel sheets for the TRB plate. The strain was analyzed by the digital image sensing of grid markings on the specimen and the forming limit diagram was calculated. An Erichsen test for the 0.8 and 1 mm thick TRB specimens was carried out and the formability was investigated by comparing with FE analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.318-328
• /
• 2018

The purpose of this study was to investigate the differences in the characteristics of the aesthetic salon operation and job satisfaction according to important considerations in opening aesthetic salons as well as to provide basic data for improving the operation of the salons. Toward this aim, a questionnaire survey was conducted for owners of small aesthetic salons across South Korea from January-March, 2016. Results were as follows: Among those who identified means of transportation and parking convenience as key considerations in launching aesthetic salon businesses, length of service, length of business operation, monthly fixed revenue and proportion of the highest profit were highest. Job satisfaction (F=3.223, p<.05) was highest (M=4.11) among those that responded 'floating population' as a primary component in launching aesthetic salon businesses, and lowest among owners who mentioned 'cost of investment' (M=3.41). Specifically, job mobility (F=2.960, p<.05) was the highest among respondents who selected means of transportation and parking convenience (M=3.95) as key criteria in launching aesthetic salon business. For the stable operation of an aesthetic salon, a location with high floating population, good transportation, parking convenience, high levels of customer access, and job satisfaction are critical factors. In addition, future studies should examine marketing strategies by operating characteristics.