• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1978-1980
• /
• 2003

본 논문에서는 광을 이용한 전류 측정 장치의 연구 내용에 대하여 기술하였다. 광을 이용한 전류 측정 장치의 가장 큰 문제점은 감도 저하를 주는 선형 복굴절 양이며, 이러한 선형 복굴절을 줄이는 방법은 광섬유를 비틀어서 선형 복굴절 양에 비해 원형 복굴절의 양을 크게 해주는 방법을 사용하였다. 광섬유를 비틀어서 측정한 결과는 측정 감도가 약 3배의 증가를 보였으며, 측정오차의 경우도 1 % 이내의 선형성을 나타내었다. 본 실험의 결과로 광섬유를 비트는 방법이 광을 이용한 전류 측정 장치의 선형 복굴절을 크게 감소시킴을 알 수 있었으며, 대전류 측정에 측정도를 높일 수 있다고 판단된다.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.117-127
• /
• 1995

The objective of this research is to investigate the effectiveness of rotating orthotropic axes model in analyzing reinforced concrete planar members under cyclic as well as monotonic loading. The structural members to be addressed are moderately reinforced beams, columns, beam-column joints, and shear walls, whose failure occurs due to compressive crushing after extensive crack propagation, The rotating orthotropic axes model which is usually used for monotonic loading is developed for cyclic loading. With the existing cyclic material models of reinforcing steel and bond-slip, this material model is used for the finite element analysis. For monotonic loading, the analytical results of the rotating orthotropic axes model are compared with reinforced concrete beams which have brittle failure. For Shear wall members under cyclic loading, the analyses are compared with the experiments for the ultimate load capacity, nonlinear deformation, and pinching effect due to crack opening and closing.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.75-81
• /
• 2012

In this paper, restoration methods were applied to restore analog medicine images with an aged image added and then blurred by noises. To restore the aged image blurred by the blurring function and added by noises, it was applied to the restoration methods which are inverse filtering and wiener filtering which are linear restoration techniques and Lucy-Richardson's algorithm which is nonlinear restoration technique. Moreover, ROC curve, a subjective evaluation method, was applied to evaluate the image quality of the restoration image. The wiener filtering using the ratio of constants acquired better image than the inverse filtering, but both of them couldn't improve ability to make a diagnosis. The restoration image applied to Lucy-Richardson algorithm was the best performance of the applied techniques and its sensitivity and specitivity were improved by 15[%] as much performance as the original aged image.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.197-202
• /
• 1995

비정상(unsteady) 압축성(compressible) 유동에 의한 공력음향(aeroacoustics)을 모사하여 공력소음원을 해석하기 위해서는 고차(high order)의 정확도와 높은 해상도(resolution)를 가지며, 상대적으로 계산시간을 많이 필요로 하지 않는 외재적(explicit) 유한차분법이 필수적으로 요구된다. 이것은 주어진 차분방식과 격자계로써 공간과 시간상에 존재하는 미소크기의 파동성분들을 충분히 구현하여야 만족할 만한 수치해를 얻을 수 있기 때문이다. 본 연구에서는, 그러한 유한차분법 중 최근에 관심의 대상이 되고있는 삼각(tridiagonal)또는 오각(pentadiagonal) 집적유한차분법(compact finite difference scheme)이 최대의 해상도를 갖도록 하는 수학적인 방법을 개발하고, 이 방법으로써 새롭게 집적유한차분법을 최적화하였다. 개발된 최적화 방법은, 푸리에 해석법(Fourier analysis)을 통하여 파동수(wavenumber) 영역에서 수학적으로 계산된 위상오차(phase error)를 최소화하는 것이며, 이러한 개념과 방법은 본 연구에서 처음으로 집적유한차분법에 적용되었다. 여러가지 절단정확도(truncation order)에 대해서 최적화 된 집적유한차분법들이 실제 공간과 시간상에서 보여주는 정확도와 오차특성을 알아보기 위하여, 이 방법들을 1차원 선형파동방정식에 적용하였고, 이 결과를 통하여 가장 정확하고 효과적인 절단정확도의 집적유한차분법을 선별하였다. 특히, 오각(pentadiagonal)법에 비해 더욱 효율적인 6차 삼각(tridiagonal)법을 1차원 Euler방정식에 적용하여, 비선형 파동에 대한 모사를 수행할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.1-10
• /
• 1991

The paper is concerned with the analysis of laminated composite shell structures using an improved degenerated shell element. In the formulation of the element stiffness, the combined use of three different techniques was made. They are; 1) an enhanced interpolation of transverse shear strains in the natural coordinate system to overcome the shear locking problem; 2) the reduced integration technique in in-plane strains to avoid the membrane locking behavior; and 3) selective addition of the nonconforming displacement modes to improve the element performances. This element is free of serious shear/membrane locking problems and undesirable compatible/commutable spurious kinematic deformation modes. An incremental total Lagrangian formulation is presented which allows the calculation of arbitrarily large displacements. The resulting non-linear equilibrium equations are solved by the Newton-Raphson method. The versatility and accuracy of this improved degenerated shell element are demonstrated by solving several numerical examples.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.77-84
• /
• 2006

Unlike homogeneous material structure, the behavior of masonry structure is not perfectly elastic even in the range of small deformations because it is a non-homogeneous and anisotropic composite structural material, consisting of masonry units, mortar, and grout. This paper proposes a simplified way of investigating the evolution of the deformation and damage of the structure subjected to a series of successive ground motions with varying shaking. Especially, the most simple but useful algorithm of Fast Fourier Transformation (FFT) has been adopted to investigate the evolution of the deformation and damage of the structure tested on the shaking table. Moreover, the development of a hi-linear curve for an equivalent SDOF system which is obtained by exploiting the frequency and stiffness relationship was discussed. Finally, some important findings related to inelastic properties of the URM are summarized.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.156-165
• /
• 2003

This paper describes the design of a robust adaptive fuzzy observer for uncertain nonlinear dynamical system. We propose a new method in which no strictly positive real (SPR) condition is needed. No a priori knowledge of an upper bound on the lumped uncertainty is required. The Lyapunov synthesis approach is used to guarantee a semi-global uniform ultimate boundedness property of the state observation error, as well as of all other signals in the closed-loop system. The theoretical results are illustrated through a simulation example of a mass-spring-damper system.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1996-2000
• /
• 2006

현재 국내 주요 하천의 홍수예경보시스템 운영과 다목적댐의 홍수조절관리를 위하여 수문학적 모형의 하나인 저류함수모형(storage function model)을 사용하고 있다. 저류함수모형은 산지가 많은 유역에 적합하도록 개발된 모형으로, 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 실제 홍수사상에 저류함수모형을 적용하기 위해서는 적절한 매개변수의 적용이 필요하다. 현재까지 저류함수모형의 매개변수를 보정하기 위한 연구가 많이 되었지만, 실질적으로 보정된 매개변수를 실제 홍수사상에 적용함에 있어서는 많은 어려움이 존재한다. 따라서 이러한 문제점을 해결하고자 본 연구에서는 저류함수 모형 중 유역유출 매개변수를 첨두유량에 대한 상대민감도분석을 통하여 매개변수의 경계조건을 설정하고, 이 경계조건을 바탕으로 최적화기법(optimization technique)을 사용하여 과거 홍수사상에 대하여 보정을 수행하였다. 그리고 보정된 매개변수를 모의 홍수사상에 적용하기 위한 최적매개변수(optimal parameter) 결정을 위한 방법들을 제시 및 적용하여 비교 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5689-5695
• /
• 2012

In this study, vibration properties of seat and human body are analyzed through test and numerical analysis methods by taking into account the viscoelastic characteristics of polyurethane foam as seat material which is applied for vehicle. These viscoelastic characteristics which show nonlinear and quasi-static behavior are obtained by compression test. In addition, the viscous elastic property of polyurethane foam is modelled mathematically by using convolution integral and nonlinear stiffness model. In order to analyze the performance on ride comfort of seat, vertical vibration model is established by using dynamic model of seat and vertical vibration model of human body at ISO5982, and so the related motion equations are derived. A numerical analysis simulation is applied by using the nonlinear motion equation with Runge-Kutta integral method. The dynamic responses of seat and human body on the input of vibration acceleration measured at the floor of the railway vehicle are examined. The variation of the index value at ride comfort on seat design parameters is analyzed and the methodology on seat design is suggested.