• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.450-455
• /
• 2005

We have studied on operational characteristics of the nitrogen laser with sliding discharge and longitudinal excitation. We could observe radiation of nitrogen laser excited by a sliding discharge along the surface of a dielectric. The shape of the beam was a ring type which had 2 mm or 4mm in diameter depending on the sliding discharge tube shape. In this experiment, We show the possibilities to make other shapes of laser beam, for example, rectangle, ellipse, and to excite another gas laser system like an excimer laser.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.44-48
• /
• 1993

산업현장에서부터 실생활용품에 이르기까지 각종판재를 소재로하여 제작하는 가공품은 종류나 수가 매우 많다고 할수 있다. 이러한 제품들을 제작 하기 위해 여러단계의 성형 공정을 거치게 되며 원만한 성형공정 을 수행하기 위한 적절한 판재성형 제어방법으로써 다이곡률 반경의 변화나 블랭크홀딩가압정도의 부분적 변화로 드로잉률을 향상시키는 방법도 있으나 이보다 판재의 성형공정 제어방법에서 공구사이 상하에 비드 를 설치하여 판재를 성형할 경우 성형공정후 제품의 두께 분포가 비교적 균일해지고 드로잉의 마찰저항을 부분적으로 증가시키며 판재성형중 미끄럼 저항의 균형을 이루어 성형시킬 판소재가 절감도며 또한 성형중 주름을 억재하여 드로잉률을 향상시킨다. 다른 방법에 비해 비드는 설차가 간단해서 적절한 형상의 bead set을 선정하여 산업현장에서 실제 사용하고 있으며 또한 소재가 비드를 통과한후 탄성역에서 소성역으로 전환되기에 성형공정 이후 스프링백 현상으로인한 제품형상의 치수가 변하는 현상을 방지하는 효과도 기대할수 있다. 따라서 본 연구에서는 자동차용판재인 아연도금피막 강판으로 실험한 결과와 비드 이론식을 고찰해 보고자 한다.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.19-28
• /
• 2011

This study developed a solar radiation reflection pavement, so called a cool pavement, to lessen the urban heat island effect by coating a pavement surface with acrylic resins mixed with light-colored pigments. From a laboratory test, simulating solar heating process in pavements, the cool pavement reduced more than $12^{\circ}C$ of pavement temperature at $60^{\circ}C$ compared to a control porous pavement. With the increase of the mixing ratio of the pigments to acrylic resins, the temperature reduction effect increased, but its workability became worse due to higher viscosity. As a result, an appropriate mixing ratio was determined as 15%. The cool pavement had better durability than the control pavement: One quarter of Catabro loss and twofold dynamic stability. Its adhesion was also higher enough not to be debonded under traffic loading. In-situ noise and friction tests conducted in two field sites showed that the cool pavement reduced its noise level by 3.7dB in average and increased its friction level by 30% compared to the control pavement. The permeability of the cool pavement was little lower than the control pavement, but higher enough to satisfy the minimum requirement for porous pavements.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.93-104
• /
• 2007

This study evaluates the mechanical properties of steel fiber reinforced porous concrete for pavement according to content of slag aggregate and fly ash to elicit the presentation of data and the way to enhance its function for the practical field application of porous concrete as a material of pavement. As a result, void ratio and permeability coefficient of porous concrete for pavement increased a little as mixing rate of slag aggregates increased. Void ratio and permeability coefficient increased a lot as mixing rate of fly ash decreased. As fly ash was mixed, national regulation of permeable concrete for pavement(8% and 0.1 cm/sec) was met. Compressive strength and flexural strength decreased as mixing rate of slag aggregates increased, but they increased a lot as mixing rate of fly ash increased. Even when slag aggregates were mixed 50% with 5% fly ash mixed, national regulation of pavement concrete(18MPa and 4.5MPa) was met. In addition, compared to non-mixture, flexural strength increased about 22.8% when 0.75vol.% of steel fiber was added. Regarding sliding resistance, BPN increased as mixing rate of slag aggregates increased. But BPN decreased as fly ash was mixed. Compared to crushed stone aggregates, abrasion resistance and fleers-thaw resistance decreased as mixing rate of slag aggregates increased. When fly ash was mixed, abrasion resistance and freeze-thaw resistance improved remarkably. Compared to non-mixture, 10% mixture of fly ash improved abrasion resistance and freeze-thaw resistance about 5.6% and 14.3 respectively.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.595-602
• /
• 2005

The purpose of this study is to utilize recycled concrete aggregates as permeable pavement materials. This study evaluates mechanical properties and durability of porous concrete depending on mixing rates of recycled aggregates and polyme. As a result, void ratio and permeability coefficient of porous concrete for pavement increased a little as mixing rate of recycled aggregates increased. Void ratio and permeability coefficient increased a lot as mixing rate of polymer increased. As polymer was mixed $20\%$, national regulation of permeable concrete for pavement($8\%$ and 0.01cm/sec) was met. Compressive strength and flexural strength decreased as mixing rate of recycled aggregates increased but they increased a lot as mixing rate of polymer increased. Even when recycled aggregates were mixed $75\%\;with\;10\%$ polymer mixed, national regulation of pavement concrete(18MPa and 4.5MPa) was met. In addition, regarding sliding resistance, BPN increased as mixing rate of recycled aggregates increased. But BPN decreased as polymer was mixed. Compared to crushed stone aggregates, abrasion resistance and freeze-thaw resistance decreased as mixing rate of recycled aggregates Increased. When polymer was mixed, abrasion resistance and freeze-thaw resistance improved remarkably. Compared to non-mixture, $10\%$ mixture of polymer improved abrasion resistance and freeze-thaw resistance about $8.6\%$ and 3.8times respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.103-112
• /
• 2009

A internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobe with elliptical and involute shapes, while the inner rotor profile is determined as conjugate to the other. And the integrated system which is composed of three main modules has been developed through AutoLISP under AutoCAD circumstance. It generates new lobe profile and calculates automatically the flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.124-131
• /
• 2006

A gerotor pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. Especially the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. For this reason the first topic presented here is the definition of the geometry of the rotors starting from the design parameters. The choice of these parameters is subject to some limitations in odor to limit the pressure angle between the rotors. Now we will consider the design optimization. The first step is the determination of the instantaneous flow rate as a function of the design parameter. This allows us to calculate three performance indexes commonly used far the study of positive displacement pumps: the flow rate irregularity, the specific flow rate, and the specific slipping. These indexes are used to optimize the design of the pump and to obtain the sets of optimum design parameter. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field, and the system could serve as a valuable one for experts and as a dependable training aid for beginners.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.304-304
• /
• 2011

최근 도시화에 따른 인구증가와 더불어 도로포장 등 불투수면적의 증가로 인하여 우기시 빗물 침투가 차단되어 도심의 지하수위가 저하되며 토양의 건토화, 열섬현상 등의 문제가 발생하게 되었다. 이러한 문제점에 착안하여 본 연구에서는 투수효과를 최대한 고려할 수 있는 고강도의 친환경 콘크리트 블록(에크스톤 바이오 블록; ECOSTONE-BIO BLOCK)을 개발하였으며 기존 콘크리트 블록의 자연적 빗물침투 억제의 문제점을 일부 개선하였다. 본 블록은 캡슐공법을 사용하여, 공극률은 높이면서(투수성 향상), 강도와 내구성이 유지됨은 물론 캡슐안에 황토성분을 첨가하여, 바이오적인 기능 및 재생골재를 이용한 친환경적 제품으로 투수성, 내구성, 기능성을 극대화 시켰다. 또한 제품표면은 천연 백색돌맹이, 흑색돌맹이의 배합으로 자연석재 느낌을 구현하였으며, 쇼트블라스트 및 커링 표면공정으로 미끄럼저항지수를 조절할 수 있어, 기존 콘크리트 보도블록에 비해 투수율, 내구성, 기능성, 안전성이 우수하여, 안전한 보행환경이 가능한 것으로 분석되었다. 마지막으로, 주변 환경과 잘 어울리도록 디자인된 바이오기능성 친환경 블록으로 도심지역 시공시 투수효과에 따른 지하수고갈방지 및 침수피해에 도움을 주리라 사료된다.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.242-248
• /
• 2016

This paper presents features of impermeable asphalt pavement material that uses thermoplastic GMA-based polymer(SIS, Stylene Isoprene Stylene) to improve the waterproof performance. Furthermore, as part of this study, the aerodynamic characteristics of the asphalt paving materials, using the newly suggested thermoplastic polymer, are identified through experiments. In the experiment, the aerodynamic characteristics were analyzed by testing on stability, flow values, porosity, dynamic stability, tensile strength ratio and skid resistance in accordance with KS standard and ASTM standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4C
• /
• pp.159-167
• /
• 2012

In this study, laboratory model pile-load test and finite element analysis were carried out to compare and analyze the strain behaviour around the model pile tip. In order to simulate the pile load, both the LCM(load control method)and DCM(displacement control method) were introduced to determine which one is appropriate for the FE simulation. In contrast to the previous simulation method, two interface elements around the model pile were used to consider the slip effect in the finite element analysis and its results were compared to the model test. Through this study it was found that the degree of non-associated flow was a dominant factor in terms of numerical solution convergence. In addition, an improved FE mesh was required to obtain the symmetric distribution of the maximum shear strain contour.