• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.65-73
• /
• 2008

The present work deals with subjective assessments to propose the objective parameter related to the subjective attribute of reverberation in the coupled room varied the aperture opening size. A 1/10 scale model was built and used for the measurements and subjective assessments. For the subjective tests, binaural impulse responses(BIRs) were measured using a dummy head and the measured BIRs were convolved with anechoic recorded music for the presentation over the headphones. The results showed that the perceived reverberation was the largest in the aperture opening size 12.5%(1.97% of mail) room surface area)and decreased with increasing the aperture opening size over 25% (3.94% of main room surface area) in the main room coupled with the secondary reverberant room. In the main room coupled with the secondary absorptive room, there was no changes in the perceived reverberation up to the aperture opening size 6.25%(0.99% of main room surface area) and it gradually decreased with increasing the aperture opening site over 12.5%. The objective parameter, T30/T15, showed a very low correlation with the perceived reverberation in the coupled room varied the aperture opening size but showed a high correlation with a new objective parameter, T30/Tbp, proposed by the authors. Because the late part decay energy more rapidly increases with increasing the aperture opening site than the early and middle part decay energy, the LDT/EDT or T3/T1 is a better quantifier to measure double slopes in the coupled room than the T30/T15.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.435-449
• /
• 2015

Physical and microstructural properties of Pungchon and Maggol limestone were investigated quantitatively during 50 cycles of artificial freezing and thawing test. There were decrease in dry weight and P,S-wave velocity, and increase in absorption rate in both rock types. Porosity, pore volume, equivalent diameter, throat thickness and pore orientation were analyzed using X-ray computed tomography images. Porosity increased, and initiation and expansion of pores were investigated as weathering progresses. Physical and microstructural variation in Maggol limestone was larger than that of Pungchon limestone because Maggol limestone has more pores and microcracks at initial state. As this study analyzes physical and microstructural properties of rock specimens comprehensively, it can be applied to further rock weathering study and can be used as fundamental data of construction and resource development in cold regions.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.535-542
• /
• 2006

In Seoul, more than 80 percent of residential buildings are constructed with unreinforced masonry(URM) buildings in early 1970 to 1990. In general, URM buildings have the advantages of reducing the construction time and easy to construction. However, URM buildings do not have enough strength against the lateral force. Moreover, low rise buildings have not adopted seismic designs, and for that reason a critical damage is expected with an earthquake. And also, the necessity of the seismic performance evaluation of existing building structures is raised through the Taiwan earthquake in 1999. The purpose of this study is to provide basic information for unreinforced masonry building in Korea by application of the proposed seismic evaluation method. In this study, seismic capacities of 50 existing unreinforced masonry buildings are evaluated based on the proposed method. Also, relationships of seismic capacities between Korean earthquake damage ratios of korean unreinforced masonry buildings are estimated. Results of this study were as follows; 1)Seismic retrofit was needed $8{\sim}48%$ in Korean unreinforced masonry buildings. 2)Korean unreinforced masonry buildings were expected to have severe damage under the earthquake intensity level experienced in Japan.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.152-157
• /
• 2002

컴포넌트 기반 개발 프로세스는 그 동안의 구조적 분석/설계 기법과 정보공학, 객체지향 등의 공학적 분석기술을 수용하고 있다. 따라서 CBD를 적용하려는 조직은 다양한 소프트웨어 공학적 기법과 아키텍처 설계 기술들을 습득해야 하였다. 또한 CBD의 핵심 역량인 반복적 개발 프로세스와 아키텍처 설계 역량을 갖추기 위해 각 개발업체 들은 CBD기술의 도입초기에 상당한 혼돈과 어려움을 겪어야 했다. 이에 본 논문에서는 CBD를 조직차원에서 습득하고 적용하는 과정을 5개의 단계로 나누고 각 단계의 목표를 설정한 컴포넌트 개발 프로세스 성숙도 모형을 제시한다. CDMM(Component based Development capability Maturity Model)으로 명명한 본 개발 능력 성숙도 모형은 소프트웨어 개발조직이 CBD를 습득하기 위해 어떤 단계를 거쳐야 하는지 또한 컴포넌트 개발을 위한 핵심기술이 어떤 것들인지를 제시한다. 이는 향후 CBD를 확산시키고 컴포넌트 기술을 통한 생산성향상과 소프트웨어 개발비 절감을 위해 기업과 국가의 정책적 지표로 활용할 수 있을 것이다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.237-248
• /
• 2006

Nowadays, the administration is strongly driving self-innovation including public sector to solve problems continuously pointed out as issues of public sector such as the low management achievement, the low productivity and costliness structure, the low ability coping with market changes and ineffectiveness in managing organization. The core of such renovation is the systematic performance management. Provincial public enterprises are also required to furnish system that can measure management results accurately and make payment according to measured results under autonomous management system to raise management efficiency and strengthen competitive power. In this paper, we design framework for measuring management results of provincial public enterprises based on Balanced Scorecard and show the example applied to Gwangiu Metropolitan City Environmental Installations Corp (GEIC).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.909-913
• /
• 2009

수자원의 60% 이상을 지표수로부터 충당해야 하는 국내 여건 상 하천수로부터의 취수가 불가피하므로 자연하천에서의 동수역학적 흐름 해석은 지천 합류량 뿐만 아니라 취수장으로부터 유출되어 빠져나가는 취수량을 함께 고려해야 한다. 본 연구에서는 상류단 경계조건으로 입력되는 본류 유량에 생성과 소멸로 작용하는 지천유입량과 취수량을 포함하여 지천유입량 및 취수량이 하천흐름 유속분포에 미치는 영향을 살펴보기 위하여 팔당댐 직하류부터 잠실수중보 구간에 RMA-2 모형을 적용하였다. 취수장에서 빠져나가는 유량을 포함하여 모의한 경우 구의, 자양, 풍납취수장 부근에서 취수에 의한 유량 손실로 인하여 유속구조가 심하게 교란되었으며 취수를 고려하지 않은 경우에 비해 유속은 평균 25 % 낮게, 수위는 1.5 cm 높게 나타났다. 자연하천의 흐름해석 결과는 오염확산 및 하상변동을 위한 입력자료로 활용되는 경우가 많으므로 취수량을 반영한 유속구조의 해석이 필요하다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.27-35
• /
• 2012

The discontinuity of rock is one of important elements that have impact on the dynamic movement of rock. A slope made of gneiss has complicated geological structure because of the gneiss forming process through metamorphism covering wide range and the anisotropic structure with foliation. In this study, before cutting slope, the rock of slope had been found as a good quality by the boring test. But during construction tension cracks had occurred in the section with 170m length during large-scale excavation work with depth more than 20m. Ground surface geological investigation, boring exploration, resistivity logging and borehole image processing had been done to find the causes of the tension crack. It was possible to estimate the scale of fault existing in large area through resistivity logging and geological investigation. Large scale slickenside and fault clay had been found as the result of comprehensive analysis.

• Proceedings of the Technology Innovation Conference
• /
• 2004.02a
• /
• pp.178-201
• /
• 2004

경제의 패러다임이 지식의 확산과 공유가 경제 성장의 주요한 요소로 대두되는 지식기반경제로 변화하게 되고, 융합 기술(fusion technology)의 중요성에 대한 인식으로부터 학제간(inter-disciplinary) 연구나 기술개발이 활발해지면서, 각 산업이 타산업과 맺고 있는 특정한 연계구조에 대한 분석은 정부의 기술정책이나 기업의 기술전략 수립에 필수적인 것으로 받아들여지고 있다. 특히 산업간 지식흐름의 구조를 파악하는 것은 산업간 협력(collaboration)의 형태나 파급효과에 대한 분석뿐만 아니라 기술 혁신을 촉진하기위한 혁신 클러스터(innovative cluster) 형성의 기초를 제공하는 것이라 하겠다. 따라서 본 연구는 기술집약적 장비에 체화된 유형자원의 간접적 지식 확산이 아닌, 특허 인용의 명백한 지식 흐름을 활용하여 한국 제조업의 지식 흐름 구조를 분석하고 이를 토대로 클러스터를 나누는 것을 목적으로 한다. 이를 위하여 특허 인용 정보가 존재하는 미국특허청(USPTO)의 자료를 이용하며, 여기에서 도출된 한국 특허의 인용관계를 통해 한국 제조업의 네트워크 및 클러스터를 생성하였다. 즉, 특허 분류를 산업 분류에 매칭(matching)시킴으로써, 특허의 인용관계를 각 특허가 속한 산업간의 지식흐름으로 변환하여 산업간 연계 구조를 파악하고 이를 토대로 한국 산업의 지식 클러스터를 생성함으로써 클러스터간 지식 흐름을 분석하고, 각 클러스터의 기술적 특성을 제시하였다. 본 연구는 한국 산업의 지식흐름을 미국특허청에 출원된 한국 특허를 활용하여 분석했다는 점에서 제기될 수 있는 해외 기술 시장으로의 전략적 차원의 출원에 의한 자료의 편중성문제와 지식흐름의 절대량이 아닌 상대량을 통해 클러스터링함으로써 발생될 수 있는 자료 활용의 한계점을 지니고 있다. 그러나 비체화 지식의 흐름을 특허인용관계를 통해 실증적으로 분석하고, 이를 통해 클러스터를 나누어 산업간 연계구조와 기간에 따른 변화 양상을 조명하며, 각 클러스터의 특성을 다양한 지표(indicators)로부터 설명했다는 데에서 의의를 찾을 수 있다. 본 연구의 결과는 기술혁신을 위한 국가 차원의 산업정책이나 기술개발과 관련한 기업의 기술전략에 활용될 수 있을 것이다.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.217-224
• /
• 1999

Although faults can be found by geological surveys, the surface traces of faults are not easily discovered by traditional geological surveys due to alluvia. In and around faults and fracture zones, the electrical resistivity appears to be lower than that of the surroundings due to the content of groundwater and clay minerals. Therefore, electrical resistivity surveys are effective to search buried faults and fracture zones. The dipole-dipole array electrical resistivity surveys, which could show the two dimensional subsurface electrical resistivity structure, were carried out in two areas, Yongdang-ri, Woongsang-eup, Yangsan-si, Kyungsangnam-do and Malbang-ri, Woedong-eup, Kyungju-si, Kyungsangpook-do. The one was next to the Dongrae Fault and the other near the Ulsan Fault was close to the region in which debatable quaternary fault traces had been found recently. From each measured data set, the electrical resistivity cross-section was obtained using the inversion program the reliability of which was analyzed using analytic solutions. A low resistivity zone was found in the inverted cross-section from the Yongdang-ri area survey data, and two low resistivity zones were found in that from the Malbang-ri area survey data. They were almost vertical and were 15∼20 m wide. Accounting the shape and the very low resistivity values of those zones (<100 Ωm)in the inverted section, they were interpreted as fracture zones although they should be proven by trenching. The reliability of the interpretation might be improved by adding some more parallel resistivity survey lines and interpreting the results in 3 and/or adding other geophysical survey.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.2
• /
• pp.53-58
• /
• 2021

In this paper, an alternative finite memory structure(FMS) smoothing filter is developed for discrete-time state-space model with a control input. To obtain the FMS smoothing filter, unbiasedness will be required beforehand in addition to a performance criteria of minimum variance. The FMS smoothing filter is obtained by directly solving an optimization problem with the unbiasedness constraint using only finite measurements and inputs on the most recent window. The proposed FMS smoothing filter is shown to have intrinsic good properties such as deadbeat and time-invariance. In addition, the proposed FMS smoothing filter is shown to be equivalent to existing FMS filters according to the delay length between the measurement and the availability of its estimate. Finally, to verify intrinsic robustness of the proposed FMS smoothing filter, computer simulations are performed for a temporary model uncertainty. Simulation results show that the proposed FMS smoothing filter can be better than the standard FMS filter and Kalman filter.