• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2017

Complexity of multiphase flows due to existence of more than two interface including free-surface in one system, cannot be simulated easily. Since more than two fluids affect to flows and disturb interface, non-linearities such as instabilities can be appeared. Among several instabilities on multiphase flows, one of representative is Rayleigh-taylor instability. In order to examine in importance of density disparity, several cases with numerous Atwood number are set. Moreover, investigation of influence on initial disturbance were also considered. Moving particle simulation (MPS) method, which was employed in this paper, was not widely used for multiphase problem. In this study, by adding new particle interaction models such as self-buoyance correction, surface tension, and boundary condition at interface models, MPS were developed having more strength of physics and robust. By applying newly developed multiphase MPS, considered cases are performed and compared each other. Additionally, though existence of disagreement of magnitude of rising velocity between theoretical values from linear potential theory and that of numerical simulation, agreement of tendency can be proved of similarity of result. the discordance of magnitude can be explained due to non-linear effects on numerical simulation which was not considered in theoretical result.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.42-57
• /
• 1995

An efficient and accurate scheme has been constructed by taking advantages of the hi-quadratic spline scheme and the higher-order boundary element method selectively depending on computation domains. Boundary surfaces are represented by 8-node boundary elements to describe curved surfaces of a ship and its neighboring free surface more accurately. The variation of the velocity potential complies with the characteristics of the 8-node element on the body surface. But on the free surface, it is assumed to follow that of the hi-quadratic spline scheme. By which, the free surface solution is free from numerical damping and has better numerical dispersion property. As numerical examples, steady and unsteady Neumann-Kelvin problems are considered. Numerical results for a submerged spheroid, Series 60($C_B=0.6$) and a modified support the proposed method. Finally, a new upstream radiation condition is derived using a wave equation operator in order to deal with problems for subcritical reduced frequency. The relevance of this operator has been confirmed in the case of unsteady Kelvin source potential.

• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.491-498
• /
• 2001

The failure phenomenon of overlaid concrete structures, such as surface crack and peel-off failure in the contact zone, was investigated due to temperature shock(rainfall). To investigate this failure phenomenon, the surface tensile stress, and the shear stress, the vertical tensile stress in the contact zone were analysed using the non-linear stress-strain relationship of material such as strain-hardening- and strain-softening diagrams. Rainfall intensity, overlay thickness and overlay material were the main variables in the analyses. It is assumed that the initial temperature of overlaid concrete structures was heated up to 55$\^{C}$ by the solar heat. With a rain temperature 10$\^{C}$ and the rainfall intensity of nR=1/a, tR=10min, 60min, the stress states of overlaid concrete structures were calculated. The result shows that only fictitious cracks occurred in the overlay surface and no shear bond failure occurred in the contact zone. The vortical tensile stress increasing with overlay thickness was proved to be the cause of peel-off failure in the contact zone. The formulae for relationship between the vertical tensile stress and overlay thickness, material properties were derived. Using this formulae, it is possible to select proper material and overlay thickness to prevent failure in the contact zone due to temperature shock caused by rainfall.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.101-116
• /
• 2016

"Athleisure" indicates a new fashion style which takes advantage of the merits of both sportswear and outdoor clothing. This fashion style produces clothing we can wear very conveniently regardless of time and place. This paper, first, surveyed the concept of athleisure and the socio-cultural background of its appearance in modern fashion, and then, analyzed the growing processes and tendencies of athleisure in various fields of fashion. The three typical characteristics of athleisure can be summarized as Non-boudary, Functionality, and Sensualirty. It is hoped that this study has provided some theoretical evidences for the athleisure which is expanding broadly but vaguely as megatrends.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1996-2000
• /
• 2006

현재 국내 주요 하천의 홍수예경보시스템 운영과 다목적댐의 홍수조절관리를 위하여 수문학적 모형의 하나인 저류함수모형(storage function model)을 사용하고 있다. 저류함수모형은 산지가 많은 유역에 적합하도록 개발된 모형으로, 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 실제 홍수사상에 저류함수모형을 적용하기 위해서는 적절한 매개변수의 적용이 필요하다. 현재까지 저류함수모형의 매개변수를 보정하기 위한 연구가 많이 되었지만, 실질적으로 보정된 매개변수를 실제 홍수사상에 적용함에 있어서는 많은 어려움이 존재한다. 따라서 이러한 문제점을 해결하고자 본 연구에서는 저류함수 모형 중 유역유출 매개변수를 첨두유량에 대한 상대민감도분석을 통하여 매개변수의 경계조건을 설정하고, 이 경계조건을 바탕으로 최적화기법(optimization technique)을 사용하여 과거 홍수사상에 대하여 보정을 수행하였다. 그리고 보정된 매개변수를 모의 홍수사상에 적용하기 위한 최적매개변수(optimal parameter) 결정을 위한 방법들을 제시 및 적용하여 비교 분석하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.807-809
• /
• 2009

Thin film deposition methods have been widely used and intensively investigated because high quality crystalline films enable to fabricate by sputtering. Especially rf magnetron sputtering deposition has advantages of being employ a relatively high deposition rate and also to achieve high crystalline films in low pressure because plasma density around target by magnetic is high. To apply ZnO thin film for SAW filter, it has highly flat surface, excellent c-axis preferred orientation and high resistivity value. As-deposited ZnO films showed the strong c-axis growth and excellent crystallinity. C-axis preferred orientation, resistivity and surface roughness highly depended on oxygen/argon gas ratio.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.213-221
• /
• 1985

Two dimensional laminar natural convection in a rectangular enclousure composed of a hot bottom wall, a partially cold side wall and insulated walls except the above walls was studied by numerical analysis and also by esperiments. In the experiments, the temperature distributions in the enclosure and Nusselt number distribution along the hot and cold walls were obtained by the use of Mach-Zehnder interferometer. At first, numerical analysis with the boundary conditions of the experimental apparatus was performed and the comparison of the results of the numerical and the experimental results validated the numerical model good ennough. Heat transfer characteristics were investigated by applying the verified numerical model with the parameters, i.e. Grashof number, aspect ratio, position of cold plate and insulation condition. The results showed the optimal conditions of temperature distribution and the position of cold wall, and the characteristics of insulation materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1445-1451
• /
• 1994

To calculate the wave pressure acting on coastal structures under the design wave condition, it is often necessary to numerically reproduce the big standing wave profiles close to wave breaking condition. For this, the governing equation and all nonlinear terms occurring in boundary conditions should be effectively considered in the numerical wave profile. In particular, the velocity square term in the free surface boundary condition is very important. A boundary element method is applied here to calculate the standing wave profile with the velocity square term fully treated by Newton iterative method. In order to check the validity of the method, the numerical wave profiles are compared to ones calculated by the perturbation method, the Fourier approximation method and the hydraulic experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.10-17
• /
• 1985

A new method is suggested for the solution of plane elasticity problems. With use of the dislocation model in the crack problems, the basic scheme of this method is to find equilibrium Burgers vectors of dislocations which are distributed along the boundary of the first fundamental boundary value problems. The stress distribution in the region can be found by superposition of the contributions of each dislocation. The method is applied to three cases with known analytical solutions, and to a V-notched specimen under uniaxial tension. The numerical results are compared with other available solutions. This method is effective and simple in its use, compared with other numerical methods. The method also provides very accurate solutions in the region except near the boundary where the discretization error is significant. The extrapolation method is suggested for the stresses in the boundary region. Extensive application are also suggested for a general estimate of the computational efficiency of the method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.6
• /
• pp.1-8
• /
• 2000

This paper describes an algorithm for semantic video object tracking using semi automatic method. In the semi automatic method, a user specifies an object of interest at the first frame and then the specified object is to be tracked in the remaining frames. The proposed algorithm consists of three steps: object boundary projection, uncertain area extraction, and boundary refinement. The object boundary is projected from the previous frame to the current frame using the motion estimation. And uncertain areas are extracted via two modules: Me error-test and color similarity test. Then, from extracted uncertain areas, the exact object boundary is obtained by boundary refinement. The simulation results show that the proposed video object extraction method provides efficient tracking results for various video sequences compared to the previous methods.