• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.67-74
• /
• 2024

As the number of coffee shops increases, many people are studying or working at coffee shops. Coffee shop operators have been required to analyze customer visits due to customer turnover and profit problems. Methods such as image analysis, QR code authentication, and Bluetooth beacon have been proposed for these statistics and analysis. However, it is difficult to use due to problems such as invasion of privacy and low accuracy. Therefore, in this study, to solve these problem and provide more accurate in-store congestion information, we propose a crowding measurement method of coffee shop using high frequency signal. There is an advantage in that a high frequency signal replaces the Bluetooth signal, and the transmission range of the signal is limited to the store, thereby increasing the accuracy of the method. To verify the performance of the proposed system, we conducted a comparative experiment with a Bluetooth based system, and as a result, the proposed method showed lower misrecognition rate. Thus, the proposed method will be an effective useful service for providing information on crowding at coffee shops and processing statistics.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.126-131
• /
• 2017

This paper designs a smart safety measurement system with Bluetooth beacon sensor nodes that can provide risk detection and evacuation/countermeasure services. The Bluetooth beacon sensor nodes is easily able to be attached to old building wall or construction or civil structure with potential danger. The proposed smart safety measurement system transmits various sensor data such as acceleration, gyroscope, geomagnetic, pressure, altitude, temperature, humidity at the spot where Bluetooth beacon sensor nodes are installed, and we can use them for risk perception, prediction, and warning services. To verify the effectiveness of the proposed system, we performed filed tests which showed that measured displacement values of precast retaining walls were within the permitted displacement value of 38.5 mm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.341-347
• /
• 2013

This study presents the remote control of a board robot using a Sensing glove based on Bluetooth communication. The board robot is a kind of riding robot controlled by an user. The user wears the proposed remote glove controller, and changes a direction of the robot by different kinds of finger actions. Bluetooth is used for wireless communication between the board robot and its user. CdS cell Sensors and a LED in the glove are used for recognition of a number of finger actions, which are measured as analog signals. The finger actions have five commands ('1'right '2'neutrality '3'left '4'operation '5'stop), which are transmitted from the user to the board robot through Bluetooth communication. Experimental results show that proposed a Sensing glove can effectively control the board robot.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.352-359
• /
• 2003

In this paper, we designed the bluetooth receiver using the microstrip bandpass filter and the high gain low noise amplifier with the 0.2$\mu\textrm{m}$ CMOS technology. A cascode inverter is adopted to implement the low noise amplifier and is one stage amplifier with a voltage reference and without the choke inductor. The designed 2.4GHz LNA was achieved a power gain of 18dB, a noise figure of 2.8dB, and the power consumption of 255mW at 2.5V power supply. Also, the microstrip receiver bandpass filter was designed that the center frequency was 2.45GHz, the bandwidth was 4% and the insert attenuation was -1.9dB. When the microstrip bandpass filter and LNA was simulated together the power gain was 16.3dB.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.285-292
• /
• 2016

By adding short-range wireless communication function such as Bluetooth and Wi-Fi to the last vehicle in conjunction with a smart phone, a modern automobile is becoming entertainment screen to determine a variety of information such as car location information, diagnosis information, etc. through the ECU vehicle electronic control unit. In this study, by utilizing short-range communications capability of the on-board diagnostic devices and smart phones in association with the on-board diagnostics, compatibility tests among a number of smart phone models, Bluetooth and NFC(Near Field Communication) were carried out and those results were analyzed. Furthermore, composition of on-board diagnostic device having Bluetooth and NFC interface function and the fault diagnosis function were implemented, and fault diagnosis debugging program was developed. In addition, fault diagnosis data of the vehicle via the OBD-II interface was extracted. Finally, the on-board diagnostics CAN Protocol implementation has been proposed, and the results of work was analyzed.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.425-434
• /
• 2023

To measure the wear amount of the TBM disk cutter in real time, it is important not only to automate the measurement using sensors, but also to stably transmit the measured data to the information processing system. In this study, we investigated the viability of utilizing Bluetooth Low Energy (BLE) technology to wirelessly transmit sensor data from the TBM cutter head to a receiver located at the chamber's rear. Through laboratory experiments, we analyzed the Received Signal Strength Index (RSSI) of the receiver considering various signal strength of the transmitter, separation distances between the transmitter and receiver and chamber fill materials. Our results demonstrate that wireless data transmission is feasible across all tested conditions when the transmitter signal strength is 0 dBm or higher.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.265-268
• /
• 2013

홈 네트워크 산업은 인간의 욕구와 맞물려 앞으로의 발전 가능성이 큰 분야이다. 미 가전협회의 조사에 따르면 소비자들도 홈 네트워크 시스템에 많은 관심을 가지고 있고, 애널리스트 샘 루세노는 "홈 오토메이션 시장은 해를 거듭할수록 규모가 커질 것이다."라고 예상하고 있다. 최근 네트워크 기술은 유선에서 무선으로 발전되고 있으며 홈 네트워크 서비스에는 유선보다 무선 네트워크 기술이 많이 쓰이고 있다. 본 논문에서는 각종 무선 네트워크 통신 기술에 대해 비교분석하고 홈 네트워크 서비스와의 연관성을 살펴보기 위하여 현재 홈 네트워크 서비스에 널리 사용되고 있는 무선 네트워킹 기술인 IEEE 802.11 무선랜 그룹과, IEEE 802.14.1의 블루투스 및 IEEE 802.14.5에 정의된 지그비 통신 기술에 대한 비교분석 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.112-122
• /
• 2008

Basing on Piconet, The Bluetooth System forms network and transmits data. There is one Master and maximum 7 Slave bluetooth devices in one piconet. A job scheduler performed by Master bluetooth device, gives the chance of data transmission to Slave bluetooth devices, which connected to Master, using polling method in piconet. The maximum data rate is 723.2 kb/s when it uses ACL link with DH5 packet type in a piconet which is constructed by two bluetooth devices. However, if there are one master and two slave devices in a piconet, then the maximum data rate is reduced to a half(361.6kb/s), because a master device has to support same data rate for all connected devices. And, there is the defect in scatternet when data transmission rate becomes low(Maximum rate: 302.2kb/s). This paper proposals the new ad-hoc network topology called "DoublePico"for overcome the low data transmission in scatternet which is constructed by piconets. The method of doublepico that represented in this paper makes high data transfer rate(Maximum rate: 457.57kb/s) in bluetooth ad-hoc networks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.185-193
• /
• 2014

In this paper, we developed a 4-channel particle counter for measuring particles, temperature, humidity in production facilities of clean-room environment, and the measured data can be transmitted via bluetooth. To measure the particle size ranging 0.3um~5um, we designed optical lens, particle detection chamber and multi-channel particle detection circuit. And we also developed a FMS program for real-time monitoring of measuring data, which resulted in the stable operation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.125-129
• /
• 2016

This study has a purpose of development of mobile health monitoring system for measuring, saving and transmitting health signals by standardizing and encoding methods under the mobile environment. The system consists of a module for measuring the health signals with Bluetooth function, encoding equipment for encoding the measured health signals by a standardized encoding method so as to maintain mutual compatibility between devices, and a mobile system for saving and transmitting the encoding health signals. The proposed system was realized under the mobilet environment and has showed to be able to make good use.