최근 전기 자동차가 현실화 되면서 자동차 내부의 Li-Ion 배터리와 전장 부품들 및 납축전지 간의 에너지를 변환하는 회로에 대한 요구가 커지고 있다. 이 회로는 높은 전압을 갖는 Li-Ion 배터리와 낮은 구동 전압을 갖는 다른 전장 부품들로 인해 출력 단이 대 전류를 취한다는 특징을 갖고 있는데 이로 인하여 출력 단의 도통 손실을 줄이기 위한 연구들이 계속되고 있다. 본 논문은 기존의 2 Transformer 형식의 브릿지 컨버터를 Parallel-Series로 연결시킨 회로를 제안하고 이 회로의 동작을 분석하였다. 제안한 회로는 2차 측에 인덕터가 존재하지 않는 Current-Fed방식으로 구동 되며, 이를 통해 도통 손실을 감소 시켰으며, 2차 측을 Series 형태로 쌓아 배터리 연계 시스템에서 문제가 되었던 Wide Range 입. 출력 시스템에서의 동작 문제를 해결하였다.
일반적으로 산업체에서 사용되는 전압형 PWM(Pulse Width Modulation) 인버터는 2개의 스위칭 소자가 직렬 연결된 단상하프 브릿지 회로를 기본 회로로 사용한다. 보통 극(pole), 암(arm) 또는 레그(leg)라 불리며 상보적으로 스위칭한다. 하지만 게이팅 신호 전달의 시지연과 스위치의 온-오프 시간차이에 의해 두 스위치가 동시에 켜지는 단락 사고를 방지하기 위해 데드 타임을 사용한다. 데드 타임은 직렬 연결된 두 스위치를 동시에 끔으로써 인버터의 안정적인 동작을 보장하지만 인버터 출력 전압 제어가 불가능하여 전압 및 전류 왜곡과 소음, 진동을 야기한다. 본 논문에서는 데드 타임 보상을 위한 적절한 전압 선정 방법에 대해 알아본다. 데드 타임 보상 전압 선정을 위해 부하 전류의 6고조파 성분을 추출, 비교하여 적절한 데드 타임 보상 전압을 선정하였으며 실험을 통해 그 유효성을 검증하였다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.17
no.1
/
pp.45-53
/
2003
For the improvement of welding performance, high-efficiency inverter system was designed and applied that system to the conventional large scale Flashbutt welder. The inverter systems are consists of full bridge PWM power control system and DSP controller. This inverter system has increased switching frequency of power control system of Flashbutt welder. For the test of application effects, we compared an our inverter control system with a conventional thyristor control system. In the results, we confirmed that our system has decreased the welding spatter amouts and improved welding performance.
본 논문은 전략광물 탐사를 위한 25kW급 양극성 펄스전원장치에 대하여 기술한다. 고효율 LCC 공진형 컨버터를 적용한 DC/DC 전력변환 회로부와 펄스를 발생시키기 위한 풀 브릿지 기반의 양방향 펄스 스위칭부로 구성된 500V, 12.5A 단위모듈을 설계하고, 4개의 모듈을 직병렬 구성하여 탐사 방식에 따라 요구되는 고전압 저전류(2kV, 12.5A) 혹은 저전압 대전류(500V, 50A) 동작이 가능한 전략광물 탐사용 펄스전원장치를 개발한다. 본 논문에서는 공진회로, 변압기 등 단위모듈의 상세설계에 대하여 기술하고, 시뮬레이션 및 실험 결과를 통해 이를 검증한다.
높은 효율과 긴 수명 등으로 형광등을 대체하며 차세대 조명기구로 각광받고 있는 LED 는 필수불가결적으로 PFC 및 DC-DC 컨버터 등으로 구성된 구동회로가 필요하다. 일반적으로 이러한 LED 구동회로의 조건으로 전체 90 % 이상의 고효율이 요구되고 있으나 Two-Stage 로 구성된 구동회로의 하드 스위칭에 따른 손실 및 기타 요건들에 의한 전력소모로 인해 실질적으로 완벽하게 조건을 달성하기 까다롭다. 최근에는 이러한 구동조건을 달성하기 위해 브릿지리스 PFC 컨버터를 적용한 Two-Stage 를 사용하거나 순환 전류 및 스위칭 손실이 보다 적은 LLC 공진 컨버터를 LED 용 구동회로에 접목하는 추세이다. 이에 따라서 본 논문은 LED 조명용 Single-stage LLC 공진 컨버터를 구성하여 동작특성을 분석하였다.
본 논문에서는 전력변환장치의 고효율화 시대에 맞추어 AC-DC단에는 브릿지리스 PFC, DC-DC단에는 Full-Bridge LLC 공진형 컨버터를 적용하여 전부하 ZVS 동작영역 확보를 통한 고효율의 저전압, 대전류 AC-DC 정류기를 제안하였다. 제안된 AC-DC 정류기는 그린 PC용 전력변환 장치로써 단말형 중앙 집중식 PC rack 시스템에 사용된다. 따라서 19 [V], 105 [A] (2KW) Full-bridge LLC 공진형 컨버터를 설계 및 제작하여 실험을 통해 제안된 토폴로지의 타당성을 검증하였다.
ITER AC/DC 컨버터는 토카막 시스템의 안전성 확보를 위하여 단락 조건에서의 높은 내구성이 요구된다. 단락시험은 크게 컨버터 출력단 단락시험과 컨버터 내부 단락시험으로 구분된다. 컨버터 출력단 단락시험은 단락시험 조건에서의 전력장치의 내구성과 브릿지 스위치의 전류 분배특성 및 Bypass 스위치 동작 특성을 확인하기 위한 것이며, 컨버터 내부 단락시험은 기계적 구조물 안전성 검증을 위한 것이다. ITER CS AC/DC 컨버터의 단락시험은 전기연구원에서 시행되었으며 본 논문에서는 컨버터 출력단 단락시험 결과를 소개하고자 한다.
전력 변환 장치에서 전자기파 장해를 막기위한 EMI 필터는 큰 부피를 차지하고 있기 때문에 이를 줄이는 것이 전력 변환장치의 제작 비용뿐 아니라 크기도 줄일 수 있어 전력 변환밀도를 높이는 유용한 방법이 된다. 기존에는 전력 변환 장치측면에서 스프레드 스팩트럼 및 소프트 스위칭을 구현하는 방법, 능동형 EMI 필터를 사용하는 방법 등이 제안되어 왔다. 하지만 공진형 컨버터의 경우 동작주파수를 흔드는 스프레드 스펙트럼을 사용하면 전압이득이 크게 영향을 받아 출력 전압의 제어 성능이 떨어진다. 본 논문에서는 공진형 컨버터에서 스프레드 스펙트럼을 구현하여 EMI 노이즈를 줄이는 동시에 원하는 출력 전압 제어 성능을 확보하기 위한 공진 탱크와 스프레드 스펙트럼 기법의 디자인 방법을 제안한다. 제안하는 디자인 방법의 타당성을 검증하기 위해 실험적으로 출력 전압제어 성능과 EMI 감소분을 보이고자 한다.
The Transactions of the Korean Institute of Power Electronics
/
v.10
no.5
/
pp.481-487
/
2005
Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter, By using high frequency inverter high frequency alternative current in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. This paper proposes new fluid heating method. Which is operated as follows. Working coil, which is wrapped outside of pipeline, makes the eddy current. Inside of heating vessel in isolated pipeline the specially designed stainless metallic package is inserted, which can be heated by eddy current losses. And then In this paper are discussed action analysis and characteristics analysis of 5[kW] class full-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how high-efficiency heater is developed and application of system are also discussed.
Park, Young-Min;Ryu, Han-Seong;Lee, Hyun-Won;Jung, Myung-Gil;Lee, Se-Hyun
The Transactions of the Korean Institute of Power Electronics
/
v.15
no.1
/
pp.43-51
/
2010
This paper proposes an analysis of voltage delay and compensation for current control in H-Bridge Multi-Level (HBML) inverters for a medium voltage motor drive with vector control. It is shown that the expansion and modularization capability of the HBML inverter is improved in case of using Phase-Shifted Pulse Width Modulation (PSPWM) since individual inverter modules operate more independently. But, the PSPWM of HBML has a phase difference between reference voltage and real voltage, which can cause instability in the current regulator at high speed where the ratio of the sampling frequency to the output frequency is insufficient. This instability of the current regulator is removed by adding a proposed method which compensate a phase difference between reference voltage and real voltage. The proposed method is suitable for HBML inverter controlled by PSPWM with low switching frequency and high speed motor drive. The validity of the proposed method is verified experimentally on 6,600[V] 1,400[kW] induction motor fed by an 13-level HBML inverter.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.