• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.109-111
• /
• 2004

20 vol.$\%$ SiC를 포함한 두 층간의 $Si_{3}N_{4}/SiC$ 나노 복합재료는$\alpha$ $-Si_3N_4$,13 nm 크기의 나노탄소 분말 그리고 $5\;wt$\%\;Y_2O_3$의 분말로 두 단계 소결을 통하여 제작된다. $Si_3N_4$ 입계 사이의 결합은 소결 후 변하지 않고 남은 compact와 $51\~62\%$의 기공으로 얻어진 표면적 사이의 반응에 의해 생성된다. 이 연구에서는 Ti 합금을 SiC 층에 브레이징을 이용하여 제작하고 기계적 특성을 연구하였다. 다양한 변형율과 결합물의 강도, 변형율 증가에 따른 층간 변화를 연구하였다. 층간 파괴 형태는 금속과 브레이징 합금 사이의 파괴, 세라믹과 브레이징 합금 사이의 파괴, 그리고 세라믹 내부에서의 파괴를 보였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.4
• /
• pp.73-79
• /
• 2003

The tensile strength test and the analysis for the section of brazing were performed in the cases of materials used for combustion chamber of regeneratively cooled liquid rocket engine. BNi-2 and BNi-7 based on nickel were used for brazing as filler metal. The properties of material and filler metal were analyzed by tensile strength test and metal microscope for 12 specimens. The tensile-strength of brazing for chrome-copper alloy and other kinds of alloy was higher than that of chrome-zirconium-copper alloy and other kinds of alloy The tensile strength in the case of BNi-2 as filler metal was higher than that of BNi-7 because the wetting property of BNi-2 was better than that of BNi-7.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.104-114
• /
• 1997

The microstructure and bond strength were investigated on the SiC/SiC and SiC/mild steel joints brazed by Ag-5at%Ti alloy. Ag-5at%Ti-2at%Fe and -5at%Fe brazing alloys were also used to see the effects of Fe addition on the bond strength of SiC/SiC brazed joints. Brazing temperature and brazing gap were selected and examined as brazing variables. The microstructure of SiC/SiC brazed joints was affected by Fe addition to the Ag-5at%Ti alloy, but the bond strength was not. Increasing brazing temperature also changed the microstructure of $Ti_5Si_3$ reaction layer and brazing alloy matrix of the SiC/SiC and SiC/mild steel joints, but not the bond strength. Brazing gap had a great effects on the bond strength. Decreasing brazing gap from 0.2 mm to 0.1 mm in SiC/SiC brazing increased the bond strength from 187 MPa to 263 MPa and, in SiC/mild steel brazing, from 189 MPa to 212 MPa. It was concluded that the most important parameter on the bond strength in SiC/SiC and SiC/mild steel brazing was the relative ratio between brazing gap and specimen size.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.547-553
• /
• 1990

With alumina ceramics to copper brazement of cylindrical shape, the thermal stress analysis was carried out by finite element method. Elastic and plastic behaviour was considered to copper, but only elastic behaviour was considered to alumina. Also material properties of alumina and copper were considered in not constant values but variable functions dependent on temperature. The result of analysis is shown that maximum tensile longitudinal stress is occurred at perimeter of alumina side interface and maximum compressive radial and tangential stresses are occurred at center of alumina side interface. Because of bending effect, tensile raidial and tangential stresses are occurred at near bottom of alumina, far from interface.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.4
• /
• pp.350-355
• /
• 2005

소형 PEMFC(Proton Exchange Membrane Fuel Cell)는 전기를 만들기 위해서 고순도의 수소를 필요로 한다. 각각의 마이크로 성형된 금속박판(스테인레스 스틸, 알루미늄)을 진공 브레이징법으로 접합하여 수소공급용 소형 개질기를 제작하였다. 마이크로 채널의 내부는 졸-겔법(스테인레스 스틸)과 양극산화법(알루미늄)으로 촉매를 지지하기 위한 다공성 $Al_2O_3$ 층을 형성시켰다. 스테인레스 스틸 박판은 에칭과 브레이징에 유리하였으나, 표면산화층 코팅을 균일하게 하여 안정적인 촉매반응을 유도하기 위한 균일한 표면 산화층 형성이 힘들었다. 반면 알루미늄 박판은 표면 산화층 형성이 상대적으로 용이했으며, 촉매를 상하지 않는 낮은 온도에서의 적층이 가능했다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.636-641
• /
• 2010

A preburner for the staged combustion in the high performance liquid rocket engine is being developed and strength experiments and finite element analyses on specimens, which simulate the brazing joint of the preburner, were performed and the results were compared. One specimen simulate the joints near oxygen injectors of head by the funance brazing and two specimens the joints of the combustion chamber cooling channel by vacuum brazing. The experiments were burst ones with strain gauges.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.253.2-253.2
• /
• 2013

탄소나노튜브(CNT)는 나노미터의 직경과 마이크로미터의 길이를 갖는 기하학적 구조와 우수한 전계방출 특성으로 디지털 엑스선 소스와 같은 차세대 전자소스 소자에 활용되고 있다. 본 발표에서는 고밀착성의 CNT 에미터와 진공 브레이징 공정 개발을 기초로 설계, 제작된 CNT 기반 디지털 엑스선 튜브에 대해서 논의한다. 나노 필러를 함유한 페이스트를 제조하여 캐소드 기판에 대한 CNT 에미터의 밀착성을 향상시켰으며, 진공 브레이징을 고온에서 최적화함으로써 진공 밀봉된 엑스선 튜브내의 진공도를 안정적으로 확보하였다. 유방암 진단을 위한 디지털 단층합성 시스템용으로 50 mA 이상의 고전류 엑스선 튜브를 제작함과 아울러 근접 암치료 또는 강내형 엑스선 영상용으로 6 mm 이하의 직경을 갖는 초소형 엑스선 튜브를 제작하였다. 개발된 CNT 기반 엑스선 튜브는 우수한 안정성과 신뢰성을 보이며, 에너지와 강도를 쉽게 제어할 수 있는 디지털 특성도 잘 나타냈다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.113-119
• /
• 2006

Brazing is an important manufacturing process in the fabrication of Heavy Water Reactor fuel rods, in which bearing and spacer pads are joined to Zircaloy-4 cladding tubes. The physical vapor deposition(PVD) technique is currently used to deposit metallic Be on the surfaces of pads as a filler metal. Amorphous Zr-Be binary alloys which are manufactured by rapid solidification process are under developing to substitute the conventional PVD-Be coating. In the present study, brazed joint with PVD and amorphous alloys of $Zr_{1-x}Be_{x}(0.3{\le}x{\le}0.5)$ as filler metals are compared by mechanism, microstructure and hardness. The thickness of brazed joint with amorphous alloys became much smaller than that of PVD-Be. The erosion of base metal did not occur in the brazed joint with amorphous alloys. The brazing mechanism for PVD-Be seems to be Be diffusion into Zr-4 with capillary action resulting from eutectic reaction while that for amorphous alloys are associated with the liquid phase formation in the brazed joint. The brazed joint microstructure with PVD-Be consists of dendrite while that with amorphous alloys is globular. The $Zr_{0.7}Be_{0.3}$ alloy shows the smooth interface with little erosion in the base metal and is recommended a most suitable brazing filler metal for Zircaloy-4.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.687-688
• /
• 2009

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.1-3
• /
• 2000