• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.105-112
• /
• 2013

The new renewable energy became popular as a clean and sustainable alternative energy under the circumstances that the entire world is facing severe abnormal climate due to the use of fossil fuel, and among which, solar energy can be obtained anywhere and is not difficult to apply it into the existing buildings, which makes it possible to be widely distributed. However, as PV module is installed into a single plate system, it shows structural weaknesses which are vulnerable to wind load and give loss to design elements in external appearance. Accordingly, this study planned one-step parallel system to complement the problems occurring from a single plate system and used STAR-CCM+ V.8 made by CD-Adapco, a computational fluid dynamics(CFD) simulation tool to measure wind load stability and support based on the design standards for a single plate system and one-step parallel system. Building height was limited to less than 10m and wind speed was given when increasing from 35m/s to 50m/s by 5m/s on PV system installed into the flat roof. In this case, our analysis suggested that step-one parallel system was in class 7-9 according to Beaufort's wind power classification, which did not have an impact on the fixed PV system, and the single plate system is considered to cause risks in designing wind speed in central districts because it is more than wind power class 12.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.3
• /
• pp.14-18
• /
• 2015

Toughened glass is known to have about four times larger external impact resistance than that of original glass. This study is aimed to verify that ceramic-printed toughened glass does not meet of GTR(Global Technical Regulations) No. 6 and its strength is lower than that of original glass through tests. The tests were conducted on the test pieces of original glass, toughened glass, and ceramic-printed toughened glass from five glass manufacturers. In Test 1, a 227g steel ball was dropped from a height of 2 meters, and damage was checked according to the test method of GTR No. 6. In Test 2, a steel ball was freely dropped from different heights and limited damage height was determined. In the result of Test 1 according to the test method of GTR No. 6, while all five test pieces of toughened glasses were not damaged, all the ceramic-printed toughened glass from the five manufacturers were damaged. In the result of Test 2, none of the five test pieces of toughened glass were damaged by a 10m ball drop, meanwhile, the original glasses were damaged by an average of 3m ball drop. And the results of the tests show that the ceramic-printed toughened glass does not have the features of toughened glass due to its very low strength. Therefore, this study contributes to the safety of consumers by considering the GTR No. 6, and by revising the toughened glass test method.

• Korean Security Journal
• /
• no.16
• /
• pp.137-159
• /
• 2008

In the 21st century, the Information Revolution caused unpredictable kinds of complications. Human society conducts a tactical network war like Swarming. Network war simultaneously consists of merits such as global monitoring and anti-dictatorship campaign, and violent demerits like terrorism. It has been becoming a generalization of terrorism of the present time to build a brotherhood and ideology to commit terrorism. This is considered as new terrorism, a form of network war. Theses days, terror organizations including Al Qaeda establish a brotherly network to commit terrorism when and where they want. New terrorism is a novel form that harms unspecified individuals. In fact, many countries have been experiencing damage from new terrorism. It is becoming an urgent issue to every country to prepare a suitable plan that cope with new terrorism. This dissertation provides defense strategy in macro and micro aspect as a responding scheme to new terrorism.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.1
• /
• pp.17-27
• /
• 2021

It takes a long period to conduct the test on soil water retention curve (SWRC) in unsaturated soils. To improve such a problem, the high air entry disk has been replaced by micro-membrane. After the soil water retention test, the results by the micro-membrane were compared with those by the ceramic disk. Multiple samples in 5 regions were used to validate that SWRCs by micro-membrane are equivalent to those by ceramic disk. Therefore, a quick procedure based on micro-membrane has been developed, which makes it available to acquire much soil water retention data. The data of SWRCs were obtained for total 29 samples using ceramic disk or micro-membrane. For Korean weathered soils, the unsaturated hydraulic characteristics are sorted by three groups. Based on van Genuchten model, the group is divided by the parameter n, and the value of n could be correlated to the void ratio as each function.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.241-248
• /
• 1991

A few Korean native rice cultivars, 'Sharei' and red rice which are regarded as weedy rice and a rice sample enshrined in the Buddha's Image were examined for the grain shape, seed coat color, amylose content, alkali digestibility and esterase response pattern. Among the Korean native varieties which are collected during 1920's and preserved up to now, there are some varieties belong to the typical Indicas. Some lines of 'Sharei' and some collections of red rice from farmer's field showed the evidence of Indica rice. A rice sample which was enshrined in the Buddha's image in 1302 looked like a mixtures of Indica and Japonica. Reviewing the articles from the old books describing characteristics and some reports on the Indica rice in Korea, it was deduced that the Indica rice was grown in Korea in some extent before 1300.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.17-24
• /
• 2008

In this study, the triaxial behaviour of an unsaturated soil was analyzed by Bishop stress descriptions. $K_0$ stress paths and those final values were independent of matric suctions after describing by the Bishop stress. The failure criteria could be defined uniquely by the Bishop stress and were also independent of matric suctions. In the low level of matric suctions the failure criteria have a linear relationship and the estimated criterion fits the measured accurately. The variable ${\chi}$ for describing the Bishop stress was a constant theoretically under the low level of matric suctions. The suction stress could be defined at zero deviatoric stress in the failure criteria and increased linearly with respect to matric suctions in both the theory and the experiments.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.4
• /
• pp.11-20
• /
• 2022

In order to acquire hydraulic characteristics for unsaturated layers, water retention tests were performed and compared by using the evaporation method, volumetric pressure plate extractor (VPPE) and chilled-mirror dew point method. The evaporation and chilled-mirror method are currently developed experimental technology and measure the water retention curve of unsaturated soils quickly and accurately. In the evaporation and VPPE method, the water retention has been measured and compared until 100kPa matric suction and consequently the result of the evaporation method could be verified. In the chilled-mirror method, the water retention has been measured until high level of matric suction and the overall shape of water retention curves could be obtained. As a result of water retention tests, the representative water retention curves were obtained and the applicability of each test method was discussed. Using both the evaporation and chilled-mirror methods, the soil water retention curve can be acquired reasonably for the whole range of matric suction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.161-170
• /
• 2023

In this study, our primary focus was on preserving the unique characteristics inherent to the medium of printmaking art, such as cultural implications and formal features, during the digital transformation of traditional printmaking. We investigated methods to incorporate augmented reality (AR) technology into the creation process of traditional printmaking. To help understand the intended fusion of traditional printmaking art and AR technology in this digital transition era, we categorized AR artworks into four types and conducted an analysis of various AR artwork examples from across the globe. From this analysis, we derived the methodologies and design directions for combining AR technology with traditional printmaking. Moreover, we created an AR printmaking piece based on the author's artwork "Spring, Summer, Fall, Winter," thereby demonstrating the significant role AR technology can play in the evolution of printmaking. Through this research, we were able to verify the potential and value of AR printmaking as an immersive art form capable of providing a more expansive narrative.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3C
• /
• pp.167-178
• /
• 2008

Rainfall-induced slope failures were simulated by seepage and stability analyses for actual slopes of weathered soils. After undisturbed sampling and testing on a specimen of unsaturated conditions, a seepage analysis was performed under actual rainfall and it was found that the pore water pressure increased at the boundary of soil and rock layers. The safety factor of slope stability decreased below 1.0 and the failure of actual slope could be simulated. Under design rainfall intensity, the seepage analysis could not include the effects of the antecedent rainfall and the rainfall duration. Due to these limitations, the safety factor of slope stability resulted in above 1.0, since the hydraulic head of soil layers had not be affected significantly. In the analysis of another slope failure, the parameters of unsaturated conditions were evaluated using artificial neural network (ANN). In the analysis of seepage, the boundary of soil and rock was saturated sufficiently and then the safety factor could be calculated below 1.0. It was found that the failure of actual slope can be simulated by ANN-based estimation.