• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.387-391
• /
• 2011

국내에서 사면 붕괴의 직접적인 원인은 강우에 의한 것으로 볼 수 있으며, 강우침투에 따른 지하수위 상승과 간극수압 증가, 강우강도 크기에 직접적으로 영향을 받는 지표면 유출로 인한 사면의 표면토사 유출 및 얕은 사면붕괴로 나타난다. 본 연구에서는 강우로 인한 지반내 침투로 불포화토가 포화토로 변화는 과정에서 침투능을 산정하고자 기존의 침투공식을 검토하고 TDR 센서를 이용한 실내실험을 통한 침투능 산정공식을 제시하였다. 제시한 침투능 산정공식을 검증하기 위한 침투실험을 수행하여 결과를 비교 분석하였으며, 이론적 해석 및 실내실험에 의한 결과는 다음과 같다. 첫째, 포화도 변화에 따른 TDR데이터 변화는 일정했으며 이를 회귀분석을 통하여 함수화하였고, 이 함수를 이용하여 지반의 포화도 및 함수비를 파악할 수 있었다. 둘째, 흡인수두항과 중력수두항이 결합된 연속적인 침투능 산정공식을 새로이 유도하였으며, 이를 이용한 결과와 TDR 센서를 이용한 실험결과와 거의 유사함을 알 수 있었다.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.541-552
• /
• 2019

In this study, landslide flume tests were performed to analyze characteristics of ground characteristics and landslide occurrence due to rainfall infiltration. As test materials, weathered granite soil and gneiss soil, the most frequent landslides in Korea, were used, and landslides were triggered by heavy rain (Intensity = 200 mm/hr). The measurement sensors were installed with 3 sets at toe, slope, top part and shallow (GL-0.2 m), middle (GL-0.4 m), and deep (GL-0.6 m) depth in the slope and measured at 10 second intervals. After landslide flume tests, the slope stability analysis was performed by applying the unsaturated soil theory based on the change of ground characteristics and compared with actual landslide occurrence from flume test. As a result of the analysis, factor of safety reflected the landslide occurrence from flume test and factor of safety decreased as rainfall infiltration, leading to slope failure. Finally we compared to the factor of safety below 1 and actual landslide occurrence time, the average difference was 1,600 seconds for weathered granite soil and 5,400 seconds for weathered gneiss soil.

• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.351-359
• /
• 2018

This study tries to figure out the precarious communication types between parents and their children. For this, the linguistic behavioral characteristics of the main characters in the movie "Daughter" were extracted from their dialogues with the matrix analysis and were conceptualized. These conceptual features were analyzed in the convergence way combined with Transactional analysis and Satir's communication theory. The result shows that the dysfunctional communication between parents and children deteriorates their relation and even could collapse it. Thus. for their whole relation, it is important that they keep the functional communication between them. The study suggested the need for the parental education and youth personality education which let them know how to facilitate their communication.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.86-95
• /
• 2016

Weight-bearing building materials are substantially weakened under high temperatures, and this is evident through the collapse of structures once engulfed by fire. Currently, there is no scientific or technological process of evaluating the real-time structural stability of a building whcih is engulfed by flame. There are many building design specifications which aim to reduce the risk of fire, but little consideration given to fire officer safety while operating in a dangerous building. This paper aims to provide direction within building policy in order to ensure the safe evacuation of fire-fighters in case of an impending building collapse. This paper suggests evaluation criteria for buildings which are damaged due to fire, autilizing current information on fire-resistant building design and a fire-resistant capacity.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.255-262
• /
• 2013

The boltzmann equation is based on the particle distribution function while the Navire-Stokes equation based on the continuum theory. In order to simulate free surface flow, this paper used the Lattice Boltzmann Method of which is the discretized form. The detail study on the characteristics of the Lattice Boltzmann Method for the free surface simulation was investigated. The developed code was validated with the traditional dam breaking problem by tracking the front position of the water. A basic roles of density functions in the Lattice Boltzmann Method is discussed. To have an engineering applications, the simulation is also conducted the free surface behavior with an arbitrary wall geometry.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.63-71
• /
• 2002

The seismic design regulations have not been applied to the low-rised buildings which are less than 6 stories in Korea. For these buildings which are designed only for gravity loads, theoretical formulas which can estimate the seismic strength of building are derived. The column hinge sway and beam hinge sway mechanism are assumed for the formulars. For the comparisons with the formulas, the results of push-over analyses of 3 and 4 storied buildings are used. It can be shown that the estimating formulas correspond well with the push-over analyses. And the seismic strength of building has a little relations with the number of bay and becomes larger as the building becomes lower. Also, as the ratio and strength of reinforcing steel increase, the seismic strength of building is increased.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.145-150
• /
• 2005

It is useful to select an appropriate mathematical model to predict landslide. Through observation and analysis of real-time measured time series, a reasonable mathematic model is chosen to do prediction of landslide. Two theoretical models, such as polynomial function and growth model, are suggested for the description and analysis of measured defermation from an active landslides. These models are applied herein to describe the main characteristics of defermation process for two types of landslide, namely polynomial and growth models. The TRS (tensiof rotation and settlement) sensors are applied to adopt two models, and the data analysis of two field (Neurpjae and Buksil) resulted in good coincidence between measured data and models.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.487-493
• /
• 2004

This study was conducted to develope a capacitive micromachined ultrasonic transducer (cMUT) which enable to high efficient non-contact transmit and receive the ultrasonic wave in air. Theoretical analysis and finite element analysis of the behavior of membrane (such as resonance frequency, membrane deflection, collapse deflection and collapse voltage) of the cMUT were performed. The design parameters of the cMUT such as the dimension and thickness of membrane, thickness of sacrificial layer, thickness and size of electrode were estimated. The resonance frequency of the membrane increased as the thickness of the membrane increased but decreased as the diameter of the membrane increased. The deflection of the membrane increased as d-c bias voltage increased. The collapse voltage of the membrane was analyzed.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.29-43
• /
• 2000

In this study, the computationally efficient inelastic buckling analysis program is developed to be used as the research tool in finding buckling strength of inelastic members. The program can determine buckling loads and buckled shapes of elastic and inelastic members which failed by flexural, lateral-torsional and/or local buckling. It can analyze singly and doubly symmetric I-shape members. In the program, the web of the member is modeled using the plate element and the flanges are modeled by beam elements. Multilinear isotropic hardening rule and the incremental theory of plasticity are used to simulate the inelastic stress-strain relationship from material tests. The program is verified using theoretical solutions and experimental results. The results from the program show good agreement with those from experiments and theory.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.262-264
• /
• 2000

원자로 내에서 연소 중인 핵연료나 저장 또는 재처리 중인 사용후핵연료의 성분으로서 시설의 공정설계, 안전성분석 및 차폐설계에 중요한 입력자료가 되는 핵분열생성물질, 방사화생성물 및 악티나이드의 핵종 농도와 이에 대응하는 방사능 강도의 기기 별 시간변 화율을 해석할 수 있는 코드 개발할 목적으로 MULTISAMS 정상 평형상태 모델을 구현하였다. MULTISAMS 코드의 반응공정 모델은 서로 연결되어 있으며 내부에 방사성물질의 혼합유체가 순환하는 세 종류의 반응기(원자로, 열교환기 및 화학반응기) 계통에서 자연적 또는 설계에 의해 일어나는 현상으로서; 반응기 간의 물질 흐름; 각 반응기 내에서 방사성 붕괴, 변환, 이동과 중성자 흡수 및 핵분열; 외부로부터 특정 핵종의 유입혹은 유출을 고려한 시간종속 핵종농도보존방정식 이론에 근거한다. 코드의 유용성 및 신뢰성을 검증하기 위해 현재 개념설계가 진행 중인 AMBIDEXTER원자력 에너지시스템을 대상으로 ORIGEN2 계산과 비교하였다. 두 코드 간의 입력조건과 배경이론차이점 때문에 절대적 비교가 불가능하므로 단순이론의 중간매개코드로서 SAMS를 이용한 2단계 비교방법을 따랐다. 결론은 MULTISAMS는 ORIGEN2 계산의 수렴치와 근사하게 일치하면서 ORIGEN2 가 다룰 수 없는 핵주기 연속후처리공정의 정상가동 시 핵종 평형농도를 기기 별로 계산할 수 있다는 장점을 확인하였다.