• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.182-197
• /
• 1993

Algal community on the subtidal rocky zone of the South Sea of Korea was divided into two or three sequencing zones. The upper subtidal zone was characterized by the wave exposure-tolerant surf wrack(Pachymeniopsis, Gigartina), which formed dense swirling carpet. Its vertical range was from the surface to $3{\sim}5$ meters in depth, and more deeply extended in turbid waters including Sorido, Yokchido, Pijindo, Manjedo. The mid subtidal zone ranging from 5 to 25 meters in depth was characterized by a large brown algal forest (Ecklenia, Sargassum). But it was generally unrecognizable in that turbid waters, in which the vertical limit of vegetation was at most $10{\sim}15$ meters in depth. The low subtidal zone was characterized by a general lack of algal species and was not easily distinguished from the mid or sometimes from the upper zone. There was a distinct difference in abundance of vegetation between turbid waters and clear waters including Munsom, Kwantaldo, Yosodo, Hongdo, Ch'ujado. In turbid waters the vegetation was much poorer because the tubidity caused from the muddy sediment inhibited an algae to settle down and to grow up. On the basis of the phytogeographical methods using UPGMA, the 10 studied islands were classified into two groups, Munsom and the others. This floristic discontinuity between the two groups might be caused from the difference of water temperature.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.404-412
• /
• 2013

Network RTK is widely used especially for static applications so far, however, the demand for high accuracy positioning for kinetic users such as land vehicles is growing for safety and convenience reasons. Kinematic users move along the roads and the network where they receive corrections can be changed. Compact Network RTK corrections should keep consistency while network change. In this paper, we introduced a method of generating Compact Network RTK corrections considering network ambiguity level adjustment by formulation of corrections. We verified the proposed method for reference station networks across whole country. We also generated Compact Network RTK corrections using simulation and real GPS data from reference stations in South Korea and evaluated performance of users. As a result, the discontinuity between corrections from two networks reduced to 0.25 cycle from several cycles. And user could achieve less than 8 cm (2DRMS) horizontal position accuracy continuously regardless of network change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.562-568
• /
• 2017

A precast floating slab track with a 5m slab panel and installed with isolators is proposed to solve the noise and vibration problem at existing elevated railway stations. Thus, the construction can be carried out rapidly without interrupting the train operation. However, dynamic instability problems may be caused by repeated discontinuities in track due to the short slab panel length and excessive rail displacement due to the inherent operation mechanism of a floating system in reducing the vibration. Furthermore, the difference of the supporting stiffness at the transition between the floating track and ballast track may raise problems. In this study, the assessment factors to evaluate the dynamic stability of the precast floating slab track are presented and assessed with the vehicle-track interaction analysis. Through the analysis, all values relevant to the stability at the floating track section are found to be acceptable, and the slab panels at the transition section are designed to satisfy the stability.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.289-299
• /
• 2012

The goal of this paper is to apply the multi-step Taylor method to a space truss, a non-linear discrete dynamic system, and analyze the non-linear dynamic response and unstable behavior of the structures. The accurate solution based on an analytical approach is needed to deal with the inverse problem, or the dynamic instability of a space truss, because the governing equation has geometrical non-linearity. Therefore, the governing motion equations of the space truss were formulated by considering non-linearity, where an accurate analytical solution could be obtained using the Taylor method. To verify the accuracy of the applied method, an SDOF model was adopted, and the analysis using the Taylor method was compared with the result of the 4th order Runge-Kutta method. Moreover, the dynamic instability and buckling characteristics of the adopted model under step excitation was investigated. The result of the comparison between the two methods of analysis was well matched, and the investigation shows that the dynamic response and the attractors in the phase space can also delineate dynamic snapping under step excitation, and damping affects the displacement of the truss. The analysis shows that dynamic buckling occurs at approximately 77% and 83% of the static buckling in the undamped and damped systems, respectively.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.405-412
• /
• 2008

Six alkali-activated (AA) concrete mixes were tested to explore the significance and limitations of developing an environmental friendly concrete. Ground granulated blast-furnace slag and powder typed sodium silicate were selected as source material and an alkaline activator, respectively. The main parameter investigated was the replacement level of lightweight fine aggregate to the natural sand. Workability and mechanical properties of lightweight AA concrete were measured: the variation of slump with time, the rate of compressive strength development, the splitting tensile strength, the moduli of rupture and elasticity, the stress-strain relationship, the bond resistance and shrinkage strain. Test results showed that the compressive strength of lightweight AA concrete sharply decreased when the replacement level of lightweight fine aggregate exceeded 30%. In particular, the increase in the discontinuous grading of lightweight aggregate resulted in the deterioration of the mechanical properties of concrete tested. The measured properties of lightweight AA concrete were also compared, wherever possible, with the results obtained from the design equations specified in ACI 318-05 or EC 2, depending on the relevance, and the results predicted from the empirical equations proposed by Slate et al. for lightweight ordinary Portland cement concrete. The stress-strain curves of different concrete were compared with predictions obtained from the mathematical model proposed by Tasnimi. The measured mechanical properties of lightweight AA concrete generally showed little agreement with the predictions obtained from these equations.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.217-227
• /
• 1994

From northeast to southwest, discontinuous sand ridges distribute on the western continental shelf of Korean Peninsular. The dimension of sand ridges is 3 to 21 m high, 3.1 to 6.8 km wavelength and 9-64 km long with 0.5 steep slope. they are probably originated and reformed by the intensity of tidal current according to the sea level rise. The characteristics of sand ridges revealed in study area are summarized as follows: (1) The sand ridges line up with the long axes of the tidal current ellipses, indicating a tidal control. (2) these are composed of two sedimentary sequences on the 3.5 kHz seismic profiles and core sediments. The upper sequence characterized by prolonged type is covered with thin veneer of massive fine sand(Mz, 2-3$\phi$) with Olive Gray(5Y 5/2). The lower sequence is characterized by internal reflector type with parallel and discontinuous. It consists of sandy mud or muddy sand(Mz, 5-7$\phi$) with laminar structures. the parallel internal reflectors are truncated on the slope of sand ridges. (3) Asymmetrical sand waves are superimposed on the sand ridges, and facing to the crest. However, symmetrical sand waves lie on the crest. Sand ridges having characteristics above is originated by scouring of tidal current, covered with coarase relict sediments, and modified by sadware.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.21-29
• /
• 2011

At existing skin detection methods using skin color information defined based on the prior knowldege, threshold value to be used at the stage of dividing the backround and the skin region was decided on a subjective point of view through experiments. Also, threshold value was selected in a passive manner according to their background and illumination environments in these existing methods. These existing methods displayed a drawback in that their performance was fully influenced by the threshold value estimated through repetitive experiments. To overcome the drawback of existing methods, this paper propose a skin region detection method using a histogram approximation based on the mean shift algorithm. The proposed method is to divide the background region and the skin region by using the mean shift method at the histogram of the skin-map of the input image generated by the comparison of the similarity with the standard skin color at the CbCr color space and actively finding the maximum value converged by brightness level. Since the histogram has a form of discontinuous function accumulated according to the brightness value of the pixel, it gets approximated as a Gaussian Mixture Model (GMM) using the Bezier Curve method. Thus, the proposed method detects the skin region by using the mean shift method and actively finding the maximum value which eventually becomes the dividing point, not by using the manually selected threshold value unlike other existing methods. This method detects the skin region high performance effectively through experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.423-430
• /
• 2013

In this research, a paramteric study to account for the effect of interfacial strength and nanotube agglomeration on the elastoplastic behavior of carbon nanotube reinforced polypropylene composites is performed. At first, the elastoplastic behavior of nanocomposites is predicted from molecular dynamics(MD) simulations. By combining the MD simulation results with the nonlinear micromechanics model based on the Mori-Tanaka model, a two-step domain decomposition method is applied to inversely identify the elastoplastic behavior of adsorption interphase zone inside nanocomposites. In nonlinear micromechanics model, the secant moduli method combined with field fluctuation method is used to predict the elastoplastic behavior of nanocomposites. To account for the imperfect material interface between nanotube and matrix polymer, displacement discontinuity condition is applied to the micromechanics model. Using the elastoplastic behavior of the adsorption interphase zone obtained from the present study, stress-strain relation of nanocomposites at various interfacial bonding condition and local nanotube agglomeration is predicted from nonlinear micromechanics model with and without the adsorption interphase zone. As a result, it has been found that local nanotube agglomeration is the most important design factor to maximize reinforcing effect of nanotube in elastic and plastic behavior.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.48-54
• /
• 2009

We investigated the genetic diversity of an endemic rare species, Forsythia ovata Nakai by examining 93 ISSR amplicons in 84 individuals distributed among five populations. The overall percentage of polymorphic ISSR amplicons was 54.8% and mean number of amplicons per ISSR primer was 6.6. The amount of genetic diversity was relatively lower than other shrub species. The Mt. Seokbyeong and Mt. Seorak B populations had the highest level of genetic diversity. Although the Seokgae-jae population had the lowest level of genetic diversity, the population was genetically the most distinctive from the other populations. About 30.6% of the total variation was allocated between five populations, which was slightly higher than other shrub species. Such a pattern of genetic variation may have resulted from the limited distribution and small population sizes of F. ovata. The UPGMA dendrogram based on Nei's genetic distance showed some decisive geographic patterns. These results suggest that, in addition to the preservation of the natural stands, the conservation of larger number of populations with small number of individuals per population is more effective for the dynamic ex situ conservation and for maintaining the genetic diversity of F. ovata than smaller number of populations with large number of individuals.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.181-187
• /
• 2013

Genetic variation in Asaum misandrum, a woodland herb in Korea, was investigated based on allozyme analysis with starch gel electrophoresis. All of previously reported populations in Korea were sampled and seven loci from six enzymes were analyzed. Overall genetic variation of A. misandrum population showed considerably high levels of genetic variation within the species (A = 2.05, P = 71.4, $H_E$ = 0.294). A positive $F_{IS}$ value of A. misandrum indicated overall deficiency of heterozygotes, and a low $F_{ST}$ value (0.112) meant very little differentiation among populations. Factors contributing to the high levels of genetic diversity found within populations of A. misandrum include population maintenance via wide distribution range from Korea to Japan and primarily outcrossing breeding system. Although it showed moderate genetic diversity level, most habitats of the species were scattered and discontinuous. Besides, low numbers of individuals were found in the most habitats and individuals are collected frequently from the wild due to the unique shape of the flowers as well as the rarity of the species. Thus, there is a need to set up a reasonable conservation strategies including the maintenance mechanism of genetic diversity of A. misandrum.