• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.677-681
• /
• 2018

In this study, the carbon block was prepared using the fluorinated coke and binder pitch by molding compression to increase its density. After fluorination, it is confirmed that the fluorine element on the coke surface was introduced up to 24.14 at% using XPS analysis. The wettability between the fluorinated coke and binder pitch was evaluated according to the reaction temperature. From the result of contact-angle tests, it can be found that the wettability was improved up to 64.7% as more fluorine atoms were introduced on the surface of cokes. Also, the density of the carbon block with the highest amount of fluorine increased with 6.8% compared to that of using the carbon block prepared by the untreated cokes.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.31-31
• /
• 2011

섬유제품은 대부분은 흡수성 또는 흡유성을 가지고 있어 물이나 기름이 등을 쉽게 흡수하는 성질이 있다. 이러한 성질 때문에 물이나 기름 등의 접촉에 의한 얼룩과 오염이 잘 되는 단점을 가지고 있다. 이러한 문제점을 해소하기 위하여 원단에 대한 발수, 발유, 방오가공 등이 연구되어 왔으며 섬유의 고유한 화학적, 기계적 물성을 유지하면서 표면과 이면이 다른 특성을 가지도록 유도하여 기능성을 부여하는 편면가공을 주목을 받게 되었다. 본 연구에서는 불소계로 발수처리 된 PET직물에 저온 Plasma와 Sputter을 이용하여 직물의 한쪽 면에는 친수성과 다른 면에는 발수성이 동시에 나타나는 편발수에 관한 실험을 했다. 불소계로 발수처리 된 시료와 저온 Plasma처리된 시료와 Sputter처리된 시료(처리면, 미처리면)를 접촉각 5회 측정하여 평균값을 나타냈다. 발수처리 된 시료의 평균 접촉각 값은 $149^{\circ}$이며, 저온 Plasma의 평균값은 $45^{\circ}$(처리면) $128^{\circ}$(미처리면), Sputter는 $74^{\circ}$(처리면) $144^{\circ}$(미처리면) 으로 가공처리 된 시료에는 양면의 접촉각이 확연한 차이가 나타난 걸로 미루어 보아 편면발수효과가 얻어졌다고 판단된다. SEM 측정을 통하여 관찰한 경우, 발수처리 된 시료에서는 불소계 발수제의 흔적이 보였다. 저온 Plasma, Sputter 처리된 시료에서는 처리시간이 높아짐에 따라서 시료표면에 코팅된 불소계 발수제 막들이 점점 파괴되는 것을 관찰할 수 있었다. 그리고 건식가공으로 인하여 처리된 표면에는 Etching작용이 일어나 표면적이 넓어져 친수화가 일어난 것으로 생각된다. 이처럼 저온 Plasma가공과 Sputter가공으로 편발수를 얻을 수 있다면 에너지 절약, 처리공정과 시간단축 등 여러 가지 장점이 기대된다.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.587-592
• /
• 2015

Activated carbons (ACs) were treated by fluorination to improve the adsorption property of toluene gas among volatile organic compounds (VOCs). The pore characteristics and surface properties of these activated carbons were evaluated by BET and XPS and the adsorption property and removal efficiency of toluene gas was investigated by gas chromatography. The breakthrough time of fluorinated ACs was increased about 27% compared to that of untreated ACs when the toluene gas of 100 ppm was flowed at a flow rate of $300cm^3/min$. Fluorinated AC of 0.1 g adsorbent totally adsorbed toluene gas in 100 ppm to 100 % during the adsorption time in 19 h. These results can be used as a treatment technology or removal of carcinogenic materials such as toluene.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.131-136
• /
• 2013

The aim of this study was to investigate the removal of fluoride using thermally treated pyrophyllite as adsorbent. Sorption experiments were conducted under batch conditions to examine the effects of adsorbent dose, reaction time, initial fluoride concentration and solution pH on fluoride removal. In the experiments, the pyrophyllite thermally treated at different temperatures [untreated (P-U), $400^{\circ}C$ (P-400), $600^{\circ}C$ (P-600)] were used. Results showed that the adsorption capacity was in the order of P-400 > P-U > P-600. The XRD analysis indicated that both P-U and P-400 were composed of quartz, dickite and pyrophyllite while P-600 was quartz. The BET analysis showed that the specific surface area was in the order of P-600 > P-400 > P-U. Kinetic data showed that fluoride sorption to P-400 arrived at equilibrium around 24 h. Equilibrium test demonstrated that the maximum sorption capacity of P-400 was 0.957 mg/g. In addition, fluoride removal by P-400 was not sensitive to solution pH between 4 and 10. However, fluoride removal decreased considerably at highly acidic (pH < 4) and alkaline (pH > 10) conditions. This study demonstrates that pyrophyllite could be used as a low-cost adsorbent for fluoride removal from aqueous solution.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.295-300
• /
• 2010

The aim of this study were to elucidate effects of fluoridated bleaching agents and post-treatment fluoride application on the color and microhardness of enamel surface. Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to four experimental groups: 1, untreated controls: 2, treatment with 10% carbamide peroxide (CP) bleaching agent; 3, treatment with 10% CP containing 0.11% fluoride; 4, treatment with 10% CP followed by a 0.9% sodium fluoride gel application. Group 2-4 were compared with the baseline data. treated 8 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color and microhardness were evaluated on Days 7 and 14. All the bleached enamel specimens revealed increased whiteness and overall color value. Groups 2 and 4 showed significantly decreased enamel microhardness compared to their baseline. The specimens treated with fluoridated bleaching agents showed relatively less reduction in enamel microhardness than those treated with nonfluoridated agents during the bleaching treatment. The addition of fluoride did not impede the tooth whitening. The fluoridated bleaching agents reduced the microhardness loss of enamel.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.312-319
• /
• 2013

The purpose of this study was to evaluate the efficacy of gargle and toothpaste containing low concentration with sodium fluoride on the remineralization through the surface microhardness and mineral content in enamel. After 4 weeks-application, the enamel surface was measured using microhardness tester and the calcium (Ca) and phosphorous (P) concentration of mineral content by electron probe microanalyzer (EPMA) analysis. By combining fluoridated gargle with toothpaste, a remineralized enamel resulted in significantly significant differences among the four groups (p<0.05). The Ca change treated with 0.23% fluoridated toothpaste and 0.02% fluoridated gargle with 0.23% toothpaste demonstrated the highest among the other groups. In conclusion. the fluoridated gargle with toothpaste by low concentration showed a significantly greatest synergistic effect on remineralization of the enamel than the other groups.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.210-217
• /
• 2015

Fluoride removal by acid and heat treated red mud were studied in batch and column system regarding contact time, initial concentration, pH, adsorbent dose, and filter depth. The results showed that acid treated with 0.8 M HCl, had highest adsorption capacity of fluoride and adsorption capacity decreased as heat treatment temperature increased. Sorption equilibrium reached in 30 min at a initial concentration of 50 mg-F/L but 1 h was required to reach the sorption equilibrium at the initial concentration of 500 mg-F/L by 0.8 M acid treated red mud (0.8 M-ATRM). Equilibrium adsorption data were fitted well to Langmuir isotherm model with maximum fluoride adsorption capacity of 23.162 mg/g. The fluoride adsorption decreased as pH increased due to the fluoride competition for favorable adsorption site with $OH^-$ at higher pH. Removal percentage was increased but the amount of adsorption per unit mass decreased by adding the amount of 0.8 M-ATRM. It was concluded that the 0.8 M-ATRM could be used as a potential adsorbent for the fluoride removal from aqueous solutions because of its high fluoride adsorption capacity and low cost.

• The Journal of the Korean dental association
• /
• v.9 no.3
• /
• pp.109-113
• /
• 1971

본 실험은 한국인 분말법랑질(120~200mesh)을 각 농도의 불소용액, 즉 NaF와 SnF₂용액에 일정시간 작용시킨후 각각의 pH범위내의 acetate buffer용액에 대한 용해도를 관찰하여 얻은 결과는 다음과 가다. 1. 실험한 모든 pH범위내에서 불소를 처리하지 않은 버랑질은 불소를 처리한 법랑질보다 용해도가 크다. 2. NaF농도가 증가하면 할수록 용해도는 감소된다. 3. SnF₂의 용해에 관한 억제효과는 모든 pH범위에서 NaF보다 현저하다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.247-252
• /
• 2005

The typical treatment method for fluoride polluted water is the flocculation and precipitation method which usually is capable of reducing the fluoride concentration down to the level of about 10 ppm. However, this method is no longer effective for the treatment of contaminated water having less than 10 ppm of fluorides. To remove fluorides in polluted water from the fluoride concentration between 1 to 10 ppm, several adsorbents were prepared mainly based on an activated alumina and the fluoride removal efficiencies of the adsorbents were analyzed. The best fluoride removal efficiency was obtained when the activated alumina treated by sulfuric acid was used as the adsorbent. A proper calcination temperature for the sulfuric acid contained activated alumina was found to be about $500^{\circ}C$. An adsorption isotherm for the adsorbent was also obtained by using Freundlich model. The values of the constants in Freundlich isotherm model were calculated to be K=6.63 and 1/n=0.29 based on the results obtained from the series of batch type adsorption experiments.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1127-1137
• /
• 2000

Applications of lanthanum ion and crude rare earth chloride to the phosphate wastewater and fluorine wastewater, respectively, as treatment agents were studied. For the investigation of phosphate removal characteristics according to the amount of lanthanum ion, initial phosphate content was decreased by about 50% when molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] was 0.25 and nearly all of phosphate was removed when the molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] to be doubled. The removal of phosphate by $La^{3+}$ appeared to reach equilibrium state rapidly, and it was exothermic reaction since the removed amount of phosphate was diminished somewhat when the reaction temperature was increased. The zeta potential of combined particulate compound of lanthanum ion and phosphate was located for its isoelectric point at pH 5.5 and the turbidity of treated wastewater was found to vary according to the pH in a similar manner as the absolute value of zeta potential of the combined particulate compound did. For the treatment of fluorine wastewater by crude rare earth chloride, the remaining fluorine content after treatment decreased as the dosage of crude rare earth chloride increased. Whereas, the turbidity of treated wastewater and the amount of sludge generated were shown to increase as more crude rare earth chloride was added. The remaining fluorine content and the turbidity of treated wastewater were decreased and the amount of sludge generated was observed to increase according the increase of coagulant dosage under the condition of constant input of crude rare earth chloride.