• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Korean Journal of Clinical Pharmacy
• /
• v.15 no.1
• /
• pp.41-45
• /
• 2005

심바스타틴은 cholesterol 생합성 과정에서 속도 조절 효소인 HMG-CoA reductase의 강력한 상경적 길항약으로서 고지혈증 치료에 널리 쓰이는 약물이다. 심바스타틴 제제인 MSD 사의 조코 20 mg정을 대조약으로 하여 시험약인 유영 제약의 엘바스타 20mg정의 생물학적 동등성 평가를 하기 위해 22명의 건강한 지원자를 모집하였다. 지원자를 두 군으로 나누어 2정씩 투여하였고 $2{\times}2$ 교차시험을 실시하였다. 심바스타틴의 혈장 중의 농도를 정량하기 위하여 발리데이션된 LC/MS/MS를 사용하였다. 채혈 시간은 투약 전 및 투약 후 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12 시간에 걸쳐 총 12시점에 걸쳐 시행하였다. 생물학적 동등성을 판정하기 위한 파라미터로 12시간까지의 혈장 중 농도곡선 하 면적 ($AUC_{12hr}$)과 최고 혈중 농도($C_{max}$)를 사용하였다. 12시간 까지의 혈중 농도 곡선 하 면적의 기하 평균은 $17.30ng{\cdot}ml/hr$(시험약)과 $17.35ng{\cdot}ml/hr$(대조약)으로 나타났다. 최고 혈중 농도의 경우 각 각 5.08 ng/ml(시험약)과 5.20 ng/ml(대조약)으로 관찰 되었다. $AUC_{12hr}$의 경우 로그변환한 평균치 차의 $90{\%}$ 신뢰구간이 log0.8510 - log1.1694이었고, $C_{max}$의 경우 log0.8176 - log1.1649로 계산되어 두 항목 모두 log0.8-log1.25이어야 한다는 식품의약품 안전청과 FDA의 기준을 모두 만족시켰다. 이상의 결과를 종합하면 시험약 엘바스타 정 20mg은 대조약 조코정 20 mg에 대하여 생물학적 동등한 것으로 판정되었다.트리머 전기비저항 탐사를 수행하였다. 이를 통해 하저에 케이블을 설치하는 방식에 비해 매우 신속하고 경제적으로 하저에 분포하는 이상대의 분포범위와 발달방향을 규명할 수 있었다.대에 대해 가장 효과적이다. 모델과 현장 적용 결과들을 통해 GRM SSM 방법을 이용하여 불규칙한 굴절면을 가진 지층들에 대해 좀 더 신뢰할 수 있는 정밀한 탄성파 속도를 산출할 수 있음을 보여주고 있다.별한 주의를 기울여야 한다.EX>$\alpha/\beta$=10인 경우 $62.0\~121.9\;Gy_{10}$ (중앙값: $93.0\;Gy_{10}$)의 분포를, ${\alpha/\beta}=3$인 경우 $93.6\~187.3\;Gy_3$ (중앙값=$137.6\;Gy_3$ )의 분포를 보였다. MD-BED $Gy_3$는 직장합병증 발생과의 관계는 통계적으로 유의하였고, 방광합병증과는 유의하지 않았다. 직장합병증과의 연관성은 MD-BED $Gy_3$보다 개별 환자의 직장전벽 총 선량 BED값인 R-BED $Gy_3$가 훨씬 더 높았다. 요도카테터 풍선의 후방지점이 대변하는 방광의 총 선량 BED값인 V-BED $Gy_3$도 방광합병증과 경향성 테스트에서 통계적 유의성을 보였다. 하지만, 어떠한 방사선선량도 골반제어율과 의미 있는 상관관계를 보이지 않았다. 본 기관에서 주치의의 선호도에 따라 강내근접치료가 외부방사선치료의 중간에 시행되는 형태인 샌드위치기법과 외부방사선치료 후반부에 시행되는 순차적 기법으로 구분하였을 때, 두 방식간 치료성적 및 합병증의 차이는 없었다. 총 치료기간에 대한 분석에서는 치료기간이 길어질수록 재발 위험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.345-348
• /
• 2004

Pink rot of Palm was occurred at Yeuju area in 2001 and 2003. Infected plants showed rotting at the leaf-stock bases and killing of the terminal bud. The first symptoms are dark brown necrotic areas on the stem. Bases of infected frond may be covered with pink spores and the spots produced oozing gum pockets. Oozing lesions occur on the stems, and leaves turn brown and droop. The causal agent were isolated from salmon-pink spores sporulating on the leaf sheaths and necrotic stem tissues. Pathogen were isolated from freshly infected tissues were identified as Gliocladium vermoseni based on mycological characteristics. Fungus were grown plenty on PDA culture. Temperature for mycelial grown was tested at 5 to $40^{\circ}C$ and optimal temperature was $25^{\circ}C$ and was not nearly grew at temperature above $35^{\circ}C$. Artificial pathogenicity were tested on 9 species of Palm family in the wound inoculation and symptoms showed similar to those observed in the field. This is the first report on pink rot of palm in Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.165-170
• /
• 1981

Recently an unknown microbial desease and some parasitic crustaceans are prevailing in the sea-weed farms of Uudaria pinnatifida along the south-eastern coast of Korea.(1) Green spots probably caused by the microbial pathogens were found on the fronds of Undaira Pinnatifide. Particularly they were densely distributed on the distal half of the fronds. The tissues of the green spot area rot off, and small holes with green colored margin are formed. The holes at the distal part of the fronds are enlarged and they finally coalesced each other. Then this process accelerates decaying of the distal ends of the fronds.. The fronds growing in the central part of the farms are usually severely damaged, whereas in the marginal area of the farm toward the open sea side the damage is less serious. An examination revealed that the deseased fronds bore a number of viable bacteria, $6.8\times10^5\;to\;1.2\times10^6$ per gram at $15^{\circ}C$, whereas the healthy fronds $1.1\times10^4$. Twenty-six kinds of colonies, 247 strains of bacteria, were isolated from deseased fronds, belonging to Moraxella, Achromobacter, Vibrio, Flavobacterium, Acinetobacter, Pseudomonas, etc. (2) Pinholes occurred in one series on the frond. They were probably caused by a harpacticoid copepod, Thalestris sp. Seven years ago when the disease was first found to occur the copepod was observed on the fronds from March of the year. Recently, however, they have been found as early as December of the previous year. (3) A gammarid amphipod, Ceinina iaponica, invades the pith of the midrib through holdfast of thalli. This rarely causes the longitudinal seperation of the entire frond through the midrib as they bore a tunnel in the pith. Sometimes holdfasts of tile heavy damaged thalli make the frond departed from the substrate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.179-186
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Pohang Old Harbor and Pohang New Port, etc. due to construction of New Port in Youngil Bay. This type of trial might be a milestone for port development in macroscale, where the induced impact analysis in the existing port due to the developemnt could be easily neglected.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.4
• /
• pp.431-446
• /
• 2007

The purpose of this study is to review the taxonomical position of Phytolacca insularis Nakai based on morphological characters and ITS sequences. Phytolacca insularis was similar to P. acinosa in the stem shape, inflorescence, apocarpous, eight pistils, eight stamens, pink anther, and eight fruits. But the unique difference between P. insularis and P. acinosa was leaf size and pistil color. Phytolaccri insularis and P. acinosa have a similar sculpturing patterns as an foveolate and microscabrate in pollen, but they differed from P. americana in having a bigger foveolae size in sculpture pattern. Phytolacca insularis and P. acinosa were similar in the seed size but different from P. americana by having a small size of seed. The seed surface of P. insularis and P. acinosa was similar with a irregularly undulate shape, but its feature of P. americana differed in having the reticulate shape. Phytolacc a insularis had identical ITS sequences with P. acinosa. Phytolacca insularis and P. acinosa have a close relationship in the morphological characters and ITS sequences. The examinations of morphology and ITS sequences suggest that P. insularis be a form of P. acinosa although it has been formerly treated as a distinct species.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.535-543
• /
• 2014

This work, which was about the synthesis of naphthalimidopropyl acrylate and GMA copolymers and their physical properties, investigated the compositions of the copolymer, the reactivity ratios of the monomer, resonance effect (Q), polar effect (e) and fluorescence of naphthalene. Azobisisobutyronitronitryl (AIBN) as an initiator was employed at $60^{\circ}C$ with dimethylformamide (DMF) of solvent for the copolymerization of NIPA. $r_1$ was found to be higher than $r_2$ from the reactivity ratios of the monomer obtained from Fineman-Ross (F-R), Kelen-$T{\ddot{u}}d{\ddot{o}}s$(K-T) methods. NIPA was found to be more copolymerized than GMA. $r_1{\cdot}r_2$ product was lower than 1, copolymerization was maked random-alternating type. The fluorescence spectrum of these polymers showed a weak monomer fluorescence band at 380 nm and a strong excimer fluorescence band at about 460 nm. Fluorescence life time of NIPA monomer showed fluorescence cover with UV 355 nm at room temperature, and life time showed $5.1449{\times}10^{-7}s$.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.3
• /
• pp.221-233
• /
• 2004

Mineralogical characteristics and genesis of phlogopite in the talc deposits of the chungnam area were studied. Mica is one of the major impurity of talc ores in the study area. Talc-related micas show typical phlogopite composition, whereas talc-unrelated micas show wide compositional variations between biotite and phlogopite. Phlogopite mainly occurs in the black-wall type zone, especially in the nodular talc ores near the outer part of talc ore bodies. Interleaving textures of phlogopite and chlorite are easily observed under the optical microscope and back-scattered electron images. Interleaving textures of phlogopite and talc are observed also. Examination of the phlogopite by transmission electron microscope reveals that 14 $\AA$ layers of chlorite are randomly interlayered within the 10 $\AA$ layers of phlogopite, which suggests that the genesis of phlogopite is closely related to chlorite. Considering the occurrence and mineralogical characteristics of phlogopite, and the possible origin of K for the formation of phlogopite, phlogopite of the study area was formed by interaction between talc ore body and hydrothermal solution containing sufficient K at the late stage of talc formation. K might be introduced from the granitic gneiss at the contact zone between the talc ore body and the granitic gneiss under favorable structural condition for the potash metasomatism.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.301-307
• /
• 2012

50-year-old female and 50-year-old male were referred to the department of the oral and maxillofacial surgery of Kyungpook national university dental hospital with asymptomatic lesions on their posterior mandibular body areas. They were discovered incidentally on panoramic radiographs during routine dental examination. Physical examination revealed no remarkable findings. Each panoramic radiograph showed well defined radiolucent lesions without hyperostotic border on their posterior mandibular body area. At first they were diagnosed as benign tumors because they looked like multilocular pattern and one of the patient showed discontinuity of mandibular canal within the lesion. CT scans demonstrated well demarcated and irregular lingual depression filled with fat tissue and they were diagnosed as developmental salivary gland defects. One of the lesion showed no change on follow-up panoramic radiograph after 4 months. Developmental salivary gland defects resembling benign tumor are atypical cases and it is suggested that confirmatory imaging using CT or MRI should be taken.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.